=================================================

DateTime: 26-10-31 00:00:04

-------------------------------------------------

[Tue Oct 27 15:26:09 2026] Booting Linux on physical CPU 0x0
[Tue Oct 27 15:26:09 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Tue Oct 27 15:26:09 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Tue Oct 27 15:26:09 2026] CPU: div instructions available: patching division code
[Tue Oct 27 15:26:09 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Tue Oct 27 15:26:09 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Tue Oct 27 15:26:09 2026] Memory policy: Data cache writealloc
[Tue Oct 27 15:26:09 2026] cma: Reserved 8 MiB at 0x37800000
[Tue Oct 27 15:26:09 2026] On node 0 totalpages: 229376
[Tue Oct 27 15:26:09 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Tue Oct 27 15:26:09 2026]   Normal zone: 2016 pages used for memmap
[Tue Oct 27 15:26:09 2026]   Normal zone: 0 pages reserved
[Tue Oct 27 15:26:09 2026]   Normal zone: 229376 pages, LIFO batch:31
[Tue Oct 27 15:26:09 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Tue Oct 27 15:26:09 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Tue Oct 27 15:26:09 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Tue Oct 27 15:26:09 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Tue Oct 27 15:26:09 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Tue Oct 27 15:26:09 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Tue Oct 27 15:26:09 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Tue Oct 27 15:26:09 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Tue Oct 27 15:26:09 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Tue Oct 27 15:26:09 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Tue Oct 27 15:26:09 2026] ftrace: allocating 25298 entries in 75 pages
[Tue Oct 27 15:26:09 2026] Hierarchical RCU implementation.
[Tue Oct 27 15:26:09 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Tue Oct 27 15:26:09 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Tue Oct 27 15:26:09 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Tue Oct 27 15:26:09 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Tue Oct 27 15:26:09 2026] Switching to timer-based delay loop, resolution 52ns
[Tue Oct 27 15:26:09 2026] Console: colour dummy device 80x30
[Tue Oct 27 15:26:09 2026] console [tty1] enabled
[Tue Oct 27 15:26:09 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Tue Oct 27 15:26:09 2026] pid_max: default: 32768 minimum: 301
[Tue Oct 27 15:26:09 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Disabling memory control group subsystem
[Tue Oct 27 15:26:09 2026] CPU: Testing write buffer coherency: ok
[Tue Oct 27 15:26:09 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Tue Oct 27 15:26:09 2026] Setting up static identity map for 0x100000 - 0x10003c
[Tue Oct 27 15:26:09 2026] Hierarchical SRCU implementation.
[Tue Oct 27 15:26:09 2026] smp: Bringing up secondary CPUs ...
[Tue Oct 27 15:26:09 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Tue Oct 27 15:26:09 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Tue Oct 27 15:26:09 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Tue Oct 27 15:26:09 2026] smp: Brought up 1 node, 4 CPUs
[Tue Oct 27 15:26:09 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Tue Oct 27 15:26:09 2026] CPU: All CPU(s) started in HYP mode.
[Tue Oct 27 15:26:09 2026] CPU: Virtualization extensions available.
[Tue Oct 27 15:26:09 2026] devtmpfs: initialized
[Tue Oct 27 15:26:09 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Tue Oct 27 15:26:09 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Tue Oct 27 15:26:09 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Tue Oct 27 15:26:09 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] pinctrl core: initialized pinctrl subsystem
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 16
[Tue Oct 27 15:26:09 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Tue Oct 27 15:26:09 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Tue Oct 27 15:26:09 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Tue Oct 27 15:26:09 2026] Serial: AMBA PL011 UART driver
[Tue Oct 27 15:26:09 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Tue Oct 27 15:26:09 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Tue Oct 27 15:26:09 2026] SCSI subsystem initialized
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbfs
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver hub
[Tue Oct 27 15:26:09 2026] usbcore: registered new device driver usb
[Tue Oct 27 15:26:09 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Tue Oct 27 15:26:09 2026] clocksource: Switched to clocksource arch_sys_counter
[Tue Oct 27 15:26:09 2026] VFS: Disk quotas dquot_6.6.0
[Tue Oct 27 15:26:09 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Tue Oct 27 15:26:09 2026] FS-Cache: Loaded
[Tue Oct 27 15:26:09 2026] CacheFiles: Loaded
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 2
[Tue Oct 27 15:26:09 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Tue Oct 27 15:26:09 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Tue Oct 27 15:26:09 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 1
[Tue Oct 27 15:26:09 2026] RPC: Registered named UNIX socket transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered udp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Tue Oct 27 15:26:09 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Tue Oct 27 15:26:09 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Tue Oct 27 15:26:09 2026] FS-Cache: Netfs 'nfs' registered for caching
[Tue Oct 27 15:26:09 2026] NFS: Registering the id_resolver key type
[Tue Oct 27 15:26:09 2026] Key type id_resolver registered
[Tue Oct 27 15:26:09 2026] Key type id_legacy registered
[Tue Oct 27 15:26:09 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Tue Oct 27 15:26:09 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Tue Oct 27 15:26:09 2026] io scheduler noop registered
[Tue Oct 27 15:26:09 2026] io scheduler deadline registered (default)
[Tue Oct 27 15:26:09 2026] io scheduler cfq registered
[Tue Oct 27 15:26:09 2026] io scheduler mq-deadline registered
[Tue Oct 27 15:26:09 2026] io scheduler kyber registered
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA memory f7910000
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Tue Oct 27 15:26:09 2026] Console: switching to colour frame buffer device 90x30
[Tue Oct 27 15:26:09 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Tue Oct 27 15:26:09 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Tue Oct 27 15:26:09 2026] vc-sm: Videocore shared memory driver
[Tue Oct 27 15:26:09 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Tue Oct 27 15:26:09 2026] brd: module loaded
[Tue Oct 27 15:26:09 2026] loop: module loaded
[Tue Oct 27 15:26:09 2026] Loading iSCSI transport class v2.0-870.
[Tue Oct 27 15:26:09 2026] libphy: Fixed MDIO Bus: probed
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver lan78xx
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver smsc95xx
[Tue Oct 27 15:26:09 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Tue Oct 27 15:26:09 2026] Core Release: 2.80a
[Tue Oct 27 15:26:09 2026] Setting default values for core params
[Tue Oct 27 15:26:09 2026] Finished setting default values for core params
[Tue Oct 27 15:26:09 2026] Using Buffer DMA mode
[Tue Oct 27 15:26:09 2026] Periodic Transfer Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] Multiprocessor Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Tue Oct 27 15:26:09 2026] Dedicated Tx FIFOs mode
[Tue Oct 27 15:26:09 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Tue Oct 27 15:26:09 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: Microframe scheduler enabled
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Tue Oct 27 15:26:09 2026] Init: Port Power? op_state=1
[Tue Oct 27 15:26:09 2026] Init: Power Port (0)
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Oct 27 15:26:09 2026] usb usb1: Product: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Tue Oct 27 15:26:09 2026] usb usb1: SerialNumber: 3f980000.usb
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: USB hub found
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: 1 port detected
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: NAK holdoff enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ split-transaction FSM enabled
[Tue Oct 27 15:26:09 2026] Module dwc_common_port init
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usb-storage
[Tue Oct 27 15:26:09 2026] mousedev: PS/2 mouse device common for all mice
[Tue Oct 27 15:26:09 2026] IR NEC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC5(x/sz) protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC6 protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR JVC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sony protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR SANYO protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sharp protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR MCE Keyboard/mouse protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR XMP protocol handler initialized
[Tue Oct 27 15:26:09 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Tue Oct 27 15:26:09 2026] bcm2835-cpufreq: min=600000 max=1200000
[Tue Oct 27 15:26:09 2026] sdhci: Secure Digital Host Controller Interface driver
[Tue Oct 27 15:26:09 2026] sdhci: Copyright(c) Pierre Ossman
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Tue Oct 27 15:26:09 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Tue Oct 27 15:26:09 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbhid
[Tue Oct 27 15:26:09 2026] usbhid: USB HID core driver
[Tue Oct 27 15:26:09 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: start
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: end - returning 0
[Tue Oct 27 15:26:09 2026] Initializing XFRM netlink socket
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 17
[Tue Oct 27 15:26:09 2026] Key type dns_resolver registered
[Tue Oct 27 15:26:09 2026] Registering SWP/SWPB emulation handler
[Tue Oct 27 15:26:09 2026] registered taskstats version 1
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Tue Oct 27 15:26:09 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Tue Oct 27 15:26:09 2026] sdhost: log_buf @ b7907000 (f7907000)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Tue Oct 27 15:26:09 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Tue Oct 27 15:26:09 2026] of_cfs_init
[Tue Oct 27 15:26:09 2026] of_cfs_init: OK
[Tue Oct 27 15:26:09 2026] Waiting for root device /dev/mmcblk0p2...
[Tue Oct 27 15:26:09 2026] random: fast init done
[Tue Oct 27 15:26:09 2026] Indeed it is in host mode hprt0 = 00021501
[Tue Oct 27 15:26:09 2026] mmc1: new high speed SDIO card at address 0001
[Tue Oct 27 15:26:09 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Tue Oct 27 15:26:09 2026] mmc0: new high speed SDHC card at address aaaa
[Tue Oct 27 15:26:09 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Tue Oct 27 15:26:10 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue Oct 27 15:26:10 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Tue Oct 27 15:26:10 2026] Indeed it is in host mode hprt0 = 00001101
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): recovery complete
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:10 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Oct 27 15:26:10 2026] devtmpfs: mounted
[Tue Oct 27 15:26:10 2026] Freeing unused kernel memory: 1024K
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: USB hub found
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: 5 ports detected
[Tue Oct 27 15:26:10 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Tue Oct 27 15:26:10 2026] systemd[1]: System time before build time, advancing clock.
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] smsc95xx v1.0.6
[Tue Oct 27 15:26:10 2026] NET: Registered protocol family 10
[Tue Oct 27 15:26:10 2026] Segment Routing with IPv6
[Tue Oct 27 15:26:10 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Tue Oct 27 15:26:10 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Tue Oct 27 15:26:10 2026] systemd[1]: Detected architecture arm.
[Tue Oct 27 15:26:10 2026] systemd[1]: Set hostname to <TM06202302>.
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Tue Oct 27 15:26:10 2026] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:11 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on Journal Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Kernel Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Control Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Created slice System Slice.
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting POSIX Message Queue File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting RPC Pipe File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Starting Set the console keyboard layout...
[Tue Oct 27 15:26:11 2026] i2c /dev entries driver
[Tue Oct 27 15:26:12 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Tue Oct 27 15:26:12 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Tue Oct 27 15:26:12 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Tue Oct 27 15:26:13 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Tue Oct 27 15:26:13 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver brcmfmac
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial_generic
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for generic
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver cp210x
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for cp210x
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] systemd-journald[102]: Received request to flush runtime journal from PID 1
[Tue Oct 27 15:26:14 2026] uart-pl011 3f201000.serial: no DMA platform data
[Tue Oct 27 15:26:15 2026] random: crng init done
[Tue Oct 27 15:26:15 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Tue Oct 27 15:26:16 2026] brcmfmac: power management disabled
[Tue Oct 27 15:26:16 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Tue Oct 27 15:26:17 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:26:17 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Tue Oct 27 15:26:17 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Tue Oct 27 15:26:19 2026] Bluetooth: Core ver 2.22
[Tue Oct 27 15:26:19 2026] NET: Registered protocol family 31
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI device and connection manager initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: L2CAP socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: SCO socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART driver ver 2.3
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol H4 registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Broadcom registered
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP filters: protocol multicast
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM TTY layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM ver 1.11
[Tue Oct 27 15:26:20 2026] NET: Registered protocol family 38
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): recovery complete
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:22 2026] fuse init (API version 7.26)
[Tue Oct 27 15:26:24 2026] usb 1-1.2: USB disconnect, device number 4
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.0: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.1: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.2: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.3: device disconnected
[Tue Oct 27 15:26:25 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:26 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:41:40 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:41:42 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:46:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:46:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:47:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:47:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:48:24 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:48:26 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:09:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 17:17:57 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:17:59 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:21:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:21:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:41:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:41:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:56:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:57:03 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:12:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:12:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:25 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:50 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 19:34:19 2026] Voltage normalised (0x00000000)
[Tue Oct 27 19:34:21 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:13:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:13:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:25:30 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 20:33:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:33:53 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:55 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:42:51 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:42:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:54:28 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:54:30 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:26:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:26:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:52:11 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:52:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:56:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:56:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:06:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:06:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:24:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:24:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:27:00 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:27:02 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:34:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 22:37:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:38:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:39:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:39:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:41:23 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:41:25 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:54:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:54:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:06:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 23:07:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:07:48 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:12:12 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:12:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:14:29 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:14:31 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:27:58 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:28:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:34:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:34:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:38:41 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:38:43 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:42:03 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:42:06 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:54:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:55:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:59:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:59:54 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:03:10 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:03:12 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:24:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 00:39:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:39:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:54:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:54:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:01:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:14:12 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:14:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:24:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:24:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:34:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:34:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:58:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:58:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:11:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:11:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:37:01 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:37:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:42:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:42:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:59:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:59:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:01:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:13:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:13:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:15:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:15:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:55:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:55:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:13:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:13:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:43:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:43:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:49:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:49:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:02:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:02:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:10:41 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:10:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:20:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:20:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:25:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:25:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:26:57 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:26:59 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:28:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:28:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:43:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:43:48 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:50:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:50:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:55:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:55:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:04:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:10:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:11:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:22:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:22:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:47:50 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:47:52 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:50:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:55:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:55:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:16:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:16:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:24:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:35:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:35:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:47:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:48:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:50:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:50:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:53:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:53:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:14:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:14:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:15:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:15:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:21:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:21:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:23:55 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:23:57 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:33:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:33:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:40:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:40:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:48:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 08:56:29 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:31 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:56:53 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:38:42 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:38:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:43:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:43:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:45:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 09:50:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:50:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:00:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:00:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:01:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:01:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:13:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:13:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:19:09 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:19:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:29:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:29:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:38:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:39:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:44:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:46:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:14:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:14:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:20:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:20:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:22:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:29:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:29:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:44:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:44:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:46:31 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 12:24:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:25:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 12:32:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 12:43:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:43:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 13:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:17:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 14:38:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 14:38:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 14:50:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 15:08:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 15:08:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:28:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:28:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:37:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:37:55 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:52:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:52:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:13:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:14:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:16:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:16:20 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:31:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:31:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:49:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:49:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:53:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:53:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:57:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:57:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:05:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:05:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:06:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:06:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:08:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:08:26 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:39:46 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 18:41:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:41:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:45:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:45:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:23:25 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:23:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:29:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:29:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:02:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 20:07:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:07:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:17:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:18:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:41:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:41:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:48:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:48:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:16:14 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:16:16 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:24:27 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:24:29 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:27:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:27:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:30:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:30:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:39:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:39:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:40:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:40:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:43:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:43:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:47:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:47:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:49:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:49:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:55:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:55:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:09:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:09:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:11:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:11:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:26:47 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:26:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:29:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:29:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:40:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:41:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:13:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 23:13:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:48:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:34:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:40:13 2026] Voltage normalised (0x00000000)
[Thu Oct 29 00:40:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:11:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:11:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:25:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:25:50 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:27:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:27:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:36:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:36:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:37:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 01:41:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:41:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:42:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:42:12 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:58:56 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:58:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:21:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:21:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:44:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:44:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:55:18 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:55:20 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:59:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:59:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:05:24 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:45 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:28:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:28:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:39:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:39:45 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:43:23 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:43:25 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:01:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:01:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:10:07 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 04:12:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:12:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:14:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:14:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:19:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:19:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:21:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:21:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:22:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:22:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:09:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:09:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:15:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:15:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:30:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:30:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:34:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:34:51 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:36:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 05:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:01:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:01:11 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:02:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:03:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:05:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:05:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:13:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:14:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:23:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:23:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:30:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:30:27 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:59:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:59:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 07:05:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 07:13:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 07:13:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:26:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:26:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:27 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:29 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:33:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:13 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:27:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:27:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:28:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:28:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:29:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:30:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:37:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:37:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:38:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:38:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:45:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:45:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:04:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:04:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:13:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:13:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:15:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:15:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:35:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:35:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:44:50 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:44:54 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:58:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:58:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 11:14:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:14:49 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:15:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:15:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:26:11 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:26:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:06:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:17 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:22:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:22:56 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:31:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:31:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:48:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:49:00 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 13:06:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:06:52 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:08:00 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:08:02 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:21 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:44 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:23:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:23:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:06:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:10:47 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:10:49 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:21:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:21:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:39:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 15:17:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 15:17:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:18:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:18:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:19:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:19:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:23:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 16:37:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:44:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:44:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:49:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:49:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:54:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 17:16:07 2026] cp210x ttyUSB1: failed to get comm status: -71
[Thu Oct 29 17:18:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:19:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:37:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:56:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:56:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:06:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:07:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:53:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:58:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:58:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:01:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 19:04:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:04:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:28:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:28:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:32:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:32:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:05:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:05:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:43:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:43:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:53:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 20:56:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:56:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 22:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 22:07:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 23:00:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:00:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:03:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:03:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:16:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:16:14 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:36:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:36:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:44:52 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:08:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:08:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:12:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:12:59 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:25:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:25:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:24 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:26 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:49:58 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:49:58 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:50:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:50:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:08:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:08:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:16:23 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:16:25 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 02:58:19 2026] Voltage normalised (0x00000000)
[Fri Oct 30 02:58:21 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:33:44 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:33:46 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:39:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:39:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:29:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:29:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:41:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:41:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:49:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:49:26 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:54:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:54:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:01:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:01:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:16:48 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 05:56:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:56:11 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:57:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:57:14 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:04:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:04:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:19:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 06:31:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:31:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:54:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:54:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:29:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:29:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:39:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:39:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:09:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:09:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:35 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:50:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:50:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:00:51 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:00:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:01:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:01:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:03:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:03:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:16 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:28:31 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:28:33 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:32:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:32:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:48:50 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:48:52 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:41:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:41:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:55:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:55:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:03:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:16:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:17:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:20:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:20:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:22:01 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:22:03 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:24:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:24:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:31:41 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:52:48 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:52:50 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:54:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:54:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 12:07:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:44:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 12:44:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 13:12:40 2026] Voltage normalised (0x00000000)
[Fri Oct 30 13:12:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:39:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:39:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:40:27 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:40:29 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:08:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:08:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:23:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:23:51 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:17:29 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:17:31 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:44:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:55:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:55:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:08:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:08:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:13:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:13:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 17:23:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:23:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:29:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:29:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:34:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:34:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 18:31:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 18:31:18 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:23:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:23:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:54:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:54:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 20:33:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 20:33:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:50:50 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:51:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:14:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 22:14:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 22:19:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:19:27 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:33:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:34:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:05:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:05:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:18:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:18:52 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:45:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:45:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:30 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:32 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:57:22 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:57:24 2026] Under-voltage detected! (0x00050005)

=================================================
=================================================

DateTime: 26-10-31 01:00:05

-------------------------------------------------

[Tue Oct 27 15:26:09 2026] Booting Linux on physical CPU 0x0
[Tue Oct 27 15:26:09 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Tue Oct 27 15:26:09 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Tue Oct 27 15:26:09 2026] CPU: div instructions available: patching division code
[Tue Oct 27 15:26:09 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Tue Oct 27 15:26:09 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Tue Oct 27 15:26:09 2026] Memory policy: Data cache writealloc
[Tue Oct 27 15:26:09 2026] cma: Reserved 8 MiB at 0x37800000
[Tue Oct 27 15:26:09 2026] On node 0 totalpages: 229376
[Tue Oct 27 15:26:09 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Tue Oct 27 15:26:09 2026]   Normal zone: 2016 pages used for memmap
[Tue Oct 27 15:26:09 2026]   Normal zone: 0 pages reserved
[Tue Oct 27 15:26:09 2026]   Normal zone: 229376 pages, LIFO batch:31
[Tue Oct 27 15:26:09 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Tue Oct 27 15:26:09 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Tue Oct 27 15:26:09 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Tue Oct 27 15:26:09 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Tue Oct 27 15:26:09 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Tue Oct 27 15:26:09 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Tue Oct 27 15:26:09 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Tue Oct 27 15:26:09 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Tue Oct 27 15:26:09 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Tue Oct 27 15:26:09 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Tue Oct 27 15:26:09 2026] ftrace: allocating 25298 entries in 75 pages
[Tue Oct 27 15:26:09 2026] Hierarchical RCU implementation.
[Tue Oct 27 15:26:09 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Tue Oct 27 15:26:09 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Tue Oct 27 15:26:09 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Tue Oct 27 15:26:09 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Tue Oct 27 15:26:09 2026] Switching to timer-based delay loop, resolution 52ns
[Tue Oct 27 15:26:09 2026] Console: colour dummy device 80x30
[Tue Oct 27 15:26:09 2026] console [tty1] enabled
[Tue Oct 27 15:26:09 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Tue Oct 27 15:26:09 2026] pid_max: default: 32768 minimum: 301
[Tue Oct 27 15:26:09 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Disabling memory control group subsystem
[Tue Oct 27 15:26:09 2026] CPU: Testing write buffer coherency: ok
[Tue Oct 27 15:26:09 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Tue Oct 27 15:26:09 2026] Setting up static identity map for 0x100000 - 0x10003c
[Tue Oct 27 15:26:09 2026] Hierarchical SRCU implementation.
[Tue Oct 27 15:26:09 2026] smp: Bringing up secondary CPUs ...
[Tue Oct 27 15:26:09 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Tue Oct 27 15:26:09 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Tue Oct 27 15:26:09 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Tue Oct 27 15:26:09 2026] smp: Brought up 1 node, 4 CPUs
[Tue Oct 27 15:26:09 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Tue Oct 27 15:26:09 2026] CPU: All CPU(s) started in HYP mode.
[Tue Oct 27 15:26:09 2026] CPU: Virtualization extensions available.
[Tue Oct 27 15:26:09 2026] devtmpfs: initialized
[Tue Oct 27 15:26:09 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Tue Oct 27 15:26:09 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Tue Oct 27 15:26:09 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Tue Oct 27 15:26:09 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] pinctrl core: initialized pinctrl subsystem
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 16
[Tue Oct 27 15:26:09 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Tue Oct 27 15:26:09 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Tue Oct 27 15:26:09 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Tue Oct 27 15:26:09 2026] Serial: AMBA PL011 UART driver
[Tue Oct 27 15:26:09 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Tue Oct 27 15:26:09 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Tue Oct 27 15:26:09 2026] SCSI subsystem initialized
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbfs
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver hub
[Tue Oct 27 15:26:09 2026] usbcore: registered new device driver usb
[Tue Oct 27 15:26:09 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Tue Oct 27 15:26:09 2026] clocksource: Switched to clocksource arch_sys_counter
[Tue Oct 27 15:26:09 2026] VFS: Disk quotas dquot_6.6.0
[Tue Oct 27 15:26:09 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Tue Oct 27 15:26:09 2026] FS-Cache: Loaded
[Tue Oct 27 15:26:09 2026] CacheFiles: Loaded
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 2
[Tue Oct 27 15:26:09 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Tue Oct 27 15:26:09 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Tue Oct 27 15:26:09 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 1
[Tue Oct 27 15:26:09 2026] RPC: Registered named UNIX socket transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered udp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Tue Oct 27 15:26:09 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Tue Oct 27 15:26:09 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Tue Oct 27 15:26:09 2026] FS-Cache: Netfs 'nfs' registered for caching
[Tue Oct 27 15:26:09 2026] NFS: Registering the id_resolver key type
[Tue Oct 27 15:26:09 2026] Key type id_resolver registered
[Tue Oct 27 15:26:09 2026] Key type id_legacy registered
[Tue Oct 27 15:26:09 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Tue Oct 27 15:26:09 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Tue Oct 27 15:26:09 2026] io scheduler noop registered
[Tue Oct 27 15:26:09 2026] io scheduler deadline registered (default)
[Tue Oct 27 15:26:09 2026] io scheduler cfq registered
[Tue Oct 27 15:26:09 2026] io scheduler mq-deadline registered
[Tue Oct 27 15:26:09 2026] io scheduler kyber registered
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA memory f7910000
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Tue Oct 27 15:26:09 2026] Console: switching to colour frame buffer device 90x30
[Tue Oct 27 15:26:09 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Tue Oct 27 15:26:09 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Tue Oct 27 15:26:09 2026] vc-sm: Videocore shared memory driver
[Tue Oct 27 15:26:09 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Tue Oct 27 15:26:09 2026] brd: module loaded
[Tue Oct 27 15:26:09 2026] loop: module loaded
[Tue Oct 27 15:26:09 2026] Loading iSCSI transport class v2.0-870.
[Tue Oct 27 15:26:09 2026] libphy: Fixed MDIO Bus: probed
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver lan78xx
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver smsc95xx
[Tue Oct 27 15:26:09 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Tue Oct 27 15:26:09 2026] Core Release: 2.80a
[Tue Oct 27 15:26:09 2026] Setting default values for core params
[Tue Oct 27 15:26:09 2026] Finished setting default values for core params
[Tue Oct 27 15:26:09 2026] Using Buffer DMA mode
[Tue Oct 27 15:26:09 2026] Periodic Transfer Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] Multiprocessor Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Tue Oct 27 15:26:09 2026] Dedicated Tx FIFOs mode
[Tue Oct 27 15:26:09 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Tue Oct 27 15:26:09 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: Microframe scheduler enabled
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Tue Oct 27 15:26:09 2026] Init: Port Power? op_state=1
[Tue Oct 27 15:26:09 2026] Init: Power Port (0)
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Oct 27 15:26:09 2026] usb usb1: Product: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Tue Oct 27 15:26:09 2026] usb usb1: SerialNumber: 3f980000.usb
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: USB hub found
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: 1 port detected
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: NAK holdoff enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ split-transaction FSM enabled
[Tue Oct 27 15:26:09 2026] Module dwc_common_port init
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usb-storage
[Tue Oct 27 15:26:09 2026] mousedev: PS/2 mouse device common for all mice
[Tue Oct 27 15:26:09 2026] IR NEC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC5(x/sz) protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC6 protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR JVC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sony protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR SANYO protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sharp protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR MCE Keyboard/mouse protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR XMP protocol handler initialized
[Tue Oct 27 15:26:09 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Tue Oct 27 15:26:09 2026] bcm2835-cpufreq: min=600000 max=1200000
[Tue Oct 27 15:26:09 2026] sdhci: Secure Digital Host Controller Interface driver
[Tue Oct 27 15:26:09 2026] sdhci: Copyright(c) Pierre Ossman
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Tue Oct 27 15:26:09 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Tue Oct 27 15:26:09 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbhid
[Tue Oct 27 15:26:09 2026] usbhid: USB HID core driver
[Tue Oct 27 15:26:09 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: start
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: end - returning 0
[Tue Oct 27 15:26:09 2026] Initializing XFRM netlink socket
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 17
[Tue Oct 27 15:26:09 2026] Key type dns_resolver registered
[Tue Oct 27 15:26:09 2026] Registering SWP/SWPB emulation handler
[Tue Oct 27 15:26:09 2026] registered taskstats version 1
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Tue Oct 27 15:26:09 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Tue Oct 27 15:26:09 2026] sdhost: log_buf @ b7907000 (f7907000)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Tue Oct 27 15:26:09 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Tue Oct 27 15:26:09 2026] of_cfs_init
[Tue Oct 27 15:26:09 2026] of_cfs_init: OK
[Tue Oct 27 15:26:09 2026] Waiting for root device /dev/mmcblk0p2...
[Tue Oct 27 15:26:09 2026] random: fast init done
[Tue Oct 27 15:26:09 2026] Indeed it is in host mode hprt0 = 00021501
[Tue Oct 27 15:26:09 2026] mmc1: new high speed SDIO card at address 0001
[Tue Oct 27 15:26:09 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Tue Oct 27 15:26:09 2026] mmc0: new high speed SDHC card at address aaaa
[Tue Oct 27 15:26:09 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Tue Oct 27 15:26:10 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue Oct 27 15:26:10 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Tue Oct 27 15:26:10 2026] Indeed it is in host mode hprt0 = 00001101
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): recovery complete
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:10 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Oct 27 15:26:10 2026] devtmpfs: mounted
[Tue Oct 27 15:26:10 2026] Freeing unused kernel memory: 1024K
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: USB hub found
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: 5 ports detected
[Tue Oct 27 15:26:10 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Tue Oct 27 15:26:10 2026] systemd[1]: System time before build time, advancing clock.
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] smsc95xx v1.0.6
[Tue Oct 27 15:26:10 2026] NET: Registered protocol family 10
[Tue Oct 27 15:26:10 2026] Segment Routing with IPv6
[Tue Oct 27 15:26:10 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Tue Oct 27 15:26:10 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Tue Oct 27 15:26:10 2026] systemd[1]: Detected architecture arm.
[Tue Oct 27 15:26:10 2026] systemd[1]: Set hostname to <TM06202302>.
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Tue Oct 27 15:26:10 2026] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:11 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on Journal Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Kernel Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Control Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Created slice System Slice.
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting POSIX Message Queue File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting RPC Pipe File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Starting Set the console keyboard layout...
[Tue Oct 27 15:26:11 2026] i2c /dev entries driver
[Tue Oct 27 15:26:12 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Tue Oct 27 15:26:12 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Tue Oct 27 15:26:12 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Tue Oct 27 15:26:13 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Tue Oct 27 15:26:13 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver brcmfmac
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial_generic
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for generic
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver cp210x
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for cp210x
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] systemd-journald[102]: Received request to flush runtime journal from PID 1
[Tue Oct 27 15:26:14 2026] uart-pl011 3f201000.serial: no DMA platform data
[Tue Oct 27 15:26:15 2026] random: crng init done
[Tue Oct 27 15:26:15 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Tue Oct 27 15:26:16 2026] brcmfmac: power management disabled
[Tue Oct 27 15:26:16 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Tue Oct 27 15:26:17 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:26:17 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Tue Oct 27 15:26:17 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Tue Oct 27 15:26:19 2026] Bluetooth: Core ver 2.22
[Tue Oct 27 15:26:19 2026] NET: Registered protocol family 31
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI device and connection manager initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: L2CAP socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: SCO socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART driver ver 2.3
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol H4 registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Broadcom registered
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP filters: protocol multicast
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM TTY layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM ver 1.11
[Tue Oct 27 15:26:20 2026] NET: Registered protocol family 38
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): recovery complete
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:22 2026] fuse init (API version 7.26)
[Tue Oct 27 15:26:24 2026] usb 1-1.2: USB disconnect, device number 4
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.0: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.1: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.2: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.3: device disconnected
[Tue Oct 27 15:26:25 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:26 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:41:40 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:41:42 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:46:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:46:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:47:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:47:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:48:24 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:48:26 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:09:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 17:17:57 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:17:59 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:21:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:21:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:41:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:41:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:56:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:57:03 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:12:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:12:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:25 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:50 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 19:34:19 2026] Voltage normalised (0x00000000)
[Tue Oct 27 19:34:21 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:13:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:13:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:25:30 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 20:33:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:33:53 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:55 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:42:51 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:42:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:54:28 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:54:30 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:26:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:26:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:52:11 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:52:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:56:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:56:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:06:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:06:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:24:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:24:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:27:00 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:27:02 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:34:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 22:37:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:38:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:39:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:39:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:41:23 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:41:25 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:54:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:54:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:06:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 23:07:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:07:48 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:12:12 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:12:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:14:29 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:14:31 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:27:58 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:28:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:34:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:34:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:38:41 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:38:43 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:42:03 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:42:06 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:54:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:55:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:59:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:59:54 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:03:10 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:03:12 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:24:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 00:39:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:39:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:54:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:54:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:01:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:14:12 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:14:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:24:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:24:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:34:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:34:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:58:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:58:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:11:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:11:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:37:01 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:37:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:42:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:42:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:59:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:59:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:01:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:13:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:13:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:15:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:15:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:55:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:55:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:13:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:13:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:43:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:43:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:49:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:49:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:02:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:02:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:10:41 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:10:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:20:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:20:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:25:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:25:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:26:57 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:26:59 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:28:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:28:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:43:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:43:48 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:50:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:50:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:55:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:55:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:04:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:10:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:11:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:22:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:22:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:47:50 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:47:52 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:50:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:55:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:55:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:16:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:16:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:24:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:35:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:35:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:47:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:48:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:50:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:50:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:53:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:53:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:14:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:14:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:15:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:15:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:21:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:21:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:23:55 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:23:57 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:33:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:33:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:40:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:40:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:48:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 08:56:29 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:31 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:56:53 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:38:42 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:38:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:43:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:43:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:45:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 09:50:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:50:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:00:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:00:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:01:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:01:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:13:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:13:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:19:09 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:19:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:29:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:29:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:38:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:39:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:44:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:46:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:14:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:14:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:20:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:20:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:22:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:29:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:29:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:44:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:44:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:46:31 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 12:24:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:25:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 12:32:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 12:43:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:43:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 13:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:17:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 14:38:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 14:38:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 14:50:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 15:08:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 15:08:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:28:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:28:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:37:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:37:55 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:52:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:52:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:13:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:14:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:16:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:16:20 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:31:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:31:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:49:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:49:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:53:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:53:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:57:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:57:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:05:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:05:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:06:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:06:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:08:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:08:26 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:39:46 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 18:41:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:41:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:45:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:45:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:23:25 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:23:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:29:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:29:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:02:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 20:07:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:07:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:17:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:18:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:41:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:41:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:48:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:48:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:16:14 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:16:16 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:24:27 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:24:29 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:27:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:27:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:30:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:30:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:39:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:39:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:40:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:40:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:43:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:43:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:47:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:47:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:49:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:49:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:55:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:55:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:09:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:09:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:11:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:11:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:26:47 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:26:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:29:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:29:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:40:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:41:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:13:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 23:13:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:48:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:34:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:40:13 2026] Voltage normalised (0x00000000)
[Thu Oct 29 00:40:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:11:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:11:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:25:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:25:50 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:27:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:27:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:36:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:36:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:37:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 01:41:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:41:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:42:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:42:12 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:58:56 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:58:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:21:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:21:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:44:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:44:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:55:18 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:55:20 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:59:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:59:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:05:24 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:45 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:28:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:28:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:39:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:39:45 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:43:23 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:43:25 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:01:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:01:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:10:07 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 04:12:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:12:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:14:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:14:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:19:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:19:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:21:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:21:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:22:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:22:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:09:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:09:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:15:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:15:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:30:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:30:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:34:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:34:51 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:36:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 05:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:01:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:01:11 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:02:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:03:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:05:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:05:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:13:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:14:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:23:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:23:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:30:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:30:27 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:59:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:59:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 07:05:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 07:13:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 07:13:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:26:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:26:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:27 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:29 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:33:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:13 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:27:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:27:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:28:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:28:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:29:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:30:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:37:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:37:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:38:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:38:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:45:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:45:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:04:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:04:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:13:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:13:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:15:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:15:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:35:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:35:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:44:50 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:44:54 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:58:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:58:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 11:14:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:14:49 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:15:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:15:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:26:11 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:26:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:06:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:17 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:22:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:22:56 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:31:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:31:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:48:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:49:00 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 13:06:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:06:52 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:08:00 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:08:02 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:21 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:44 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:23:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:23:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:06:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:10:47 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:10:49 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:21:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:21:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:39:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 15:17:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 15:17:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:18:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:18:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:19:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:19:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:23:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 16:37:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:44:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:44:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:49:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:49:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:54:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 17:16:07 2026] cp210x ttyUSB1: failed to get comm status: -71
[Thu Oct 29 17:18:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:19:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:37:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:56:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:56:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:06:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:07:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:53:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:58:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:58:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:01:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 19:04:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:04:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:28:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:28:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:32:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:32:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:05:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:05:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:43:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:43:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:53:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 20:56:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:56:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 22:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 22:07:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 23:00:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:00:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:03:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:03:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:16:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:16:14 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:36:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:36:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:44:52 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:08:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:08:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:12:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:12:59 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:25:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:25:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:24 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:26 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:49:58 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:49:58 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:50:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:50:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:08:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:08:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:16:23 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:16:25 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 02:58:19 2026] Voltage normalised (0x00000000)
[Fri Oct 30 02:58:21 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:33:44 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:33:46 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:39:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:39:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:29:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:29:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:41:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:41:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:49:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:49:26 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:54:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:54:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:01:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:01:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:16:48 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 05:56:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:56:11 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:57:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:57:14 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:04:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:04:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:19:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 06:31:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:31:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:54:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:54:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:29:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:29:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:39:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:39:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:09:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:09:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:35 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:50:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:50:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:00:51 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:00:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:01:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:01:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:03:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:03:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:16 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:28:31 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:28:33 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:32:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:32:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:48:50 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:48:52 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:41:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:41:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:55:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:55:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:03:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:16:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:17:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:20:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:20:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:22:01 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:22:03 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:24:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:24:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:31:41 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:52:48 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:52:50 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:54:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:54:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 12:07:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:44:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 12:44:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 13:12:40 2026] Voltage normalised (0x00000000)
[Fri Oct 30 13:12:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:39:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:39:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:40:27 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:40:29 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:08:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:08:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:23:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:23:51 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:17:29 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:17:31 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:44:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:55:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:55:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:08:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:08:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:13:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:13:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 17:23:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:23:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:29:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:29:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:34:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:34:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 18:31:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 18:31:18 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:23:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:23:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:54:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:54:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 20:33:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 20:33:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:50:50 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:51:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:14:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 22:14:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 22:19:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:19:27 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:33:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:34:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:05:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:05:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:18:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:18:52 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:45:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:45:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:30 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:32 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:57:22 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:57:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:26:09 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:26:11 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:34:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:34:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:52:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 00:59:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:59:13 2026] Under-voltage detected! (0x00050005)

=================================================
=================================================

DateTime: 26-10-31 02:00:05

-------------------------------------------------

[Tue Oct 27 15:26:09 2026] Booting Linux on physical CPU 0x0
[Tue Oct 27 15:26:09 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Tue Oct 27 15:26:09 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Tue Oct 27 15:26:09 2026] CPU: div instructions available: patching division code
[Tue Oct 27 15:26:09 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Tue Oct 27 15:26:09 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Tue Oct 27 15:26:09 2026] Memory policy: Data cache writealloc
[Tue Oct 27 15:26:09 2026] cma: Reserved 8 MiB at 0x37800000
[Tue Oct 27 15:26:09 2026] On node 0 totalpages: 229376
[Tue Oct 27 15:26:09 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Tue Oct 27 15:26:09 2026]   Normal zone: 2016 pages used for memmap
[Tue Oct 27 15:26:09 2026]   Normal zone: 0 pages reserved
[Tue Oct 27 15:26:09 2026]   Normal zone: 229376 pages, LIFO batch:31
[Tue Oct 27 15:26:09 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Tue Oct 27 15:26:09 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Tue Oct 27 15:26:09 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Tue Oct 27 15:26:09 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Tue Oct 27 15:26:09 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Tue Oct 27 15:26:09 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Tue Oct 27 15:26:09 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Tue Oct 27 15:26:09 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Tue Oct 27 15:26:09 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Tue Oct 27 15:26:09 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Tue Oct 27 15:26:09 2026] ftrace: allocating 25298 entries in 75 pages
[Tue Oct 27 15:26:09 2026] Hierarchical RCU implementation.
[Tue Oct 27 15:26:09 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Tue Oct 27 15:26:09 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Tue Oct 27 15:26:09 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Tue Oct 27 15:26:09 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Tue Oct 27 15:26:09 2026] Switching to timer-based delay loop, resolution 52ns
[Tue Oct 27 15:26:09 2026] Console: colour dummy device 80x30
[Tue Oct 27 15:26:09 2026] console [tty1] enabled
[Tue Oct 27 15:26:09 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Tue Oct 27 15:26:09 2026] pid_max: default: 32768 minimum: 301
[Tue Oct 27 15:26:09 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Disabling memory control group subsystem
[Tue Oct 27 15:26:09 2026] CPU: Testing write buffer coherency: ok
[Tue Oct 27 15:26:09 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Tue Oct 27 15:26:09 2026] Setting up static identity map for 0x100000 - 0x10003c
[Tue Oct 27 15:26:09 2026] Hierarchical SRCU implementation.
[Tue Oct 27 15:26:09 2026] smp: Bringing up secondary CPUs ...
[Tue Oct 27 15:26:09 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Tue Oct 27 15:26:09 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Tue Oct 27 15:26:09 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Tue Oct 27 15:26:09 2026] smp: Brought up 1 node, 4 CPUs
[Tue Oct 27 15:26:09 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Tue Oct 27 15:26:09 2026] CPU: All CPU(s) started in HYP mode.
[Tue Oct 27 15:26:09 2026] CPU: Virtualization extensions available.
[Tue Oct 27 15:26:09 2026] devtmpfs: initialized
[Tue Oct 27 15:26:09 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Tue Oct 27 15:26:09 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Tue Oct 27 15:26:09 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Tue Oct 27 15:26:09 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] pinctrl core: initialized pinctrl subsystem
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 16
[Tue Oct 27 15:26:09 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Tue Oct 27 15:26:09 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Tue Oct 27 15:26:09 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Tue Oct 27 15:26:09 2026] Serial: AMBA PL011 UART driver
[Tue Oct 27 15:26:09 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Tue Oct 27 15:26:09 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Tue Oct 27 15:26:09 2026] SCSI subsystem initialized
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbfs
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver hub
[Tue Oct 27 15:26:09 2026] usbcore: registered new device driver usb
[Tue Oct 27 15:26:09 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Tue Oct 27 15:26:09 2026] clocksource: Switched to clocksource arch_sys_counter
[Tue Oct 27 15:26:09 2026] VFS: Disk quotas dquot_6.6.0
[Tue Oct 27 15:26:09 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Tue Oct 27 15:26:09 2026] FS-Cache: Loaded
[Tue Oct 27 15:26:09 2026] CacheFiles: Loaded
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 2
[Tue Oct 27 15:26:09 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Tue Oct 27 15:26:09 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Tue Oct 27 15:26:09 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 1
[Tue Oct 27 15:26:09 2026] RPC: Registered named UNIX socket transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered udp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Tue Oct 27 15:26:09 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Tue Oct 27 15:26:09 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Tue Oct 27 15:26:09 2026] FS-Cache: Netfs 'nfs' registered for caching
[Tue Oct 27 15:26:09 2026] NFS: Registering the id_resolver key type
[Tue Oct 27 15:26:09 2026] Key type id_resolver registered
[Tue Oct 27 15:26:09 2026] Key type id_legacy registered
[Tue Oct 27 15:26:09 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Tue Oct 27 15:26:09 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Tue Oct 27 15:26:09 2026] io scheduler noop registered
[Tue Oct 27 15:26:09 2026] io scheduler deadline registered (default)
[Tue Oct 27 15:26:09 2026] io scheduler cfq registered
[Tue Oct 27 15:26:09 2026] io scheduler mq-deadline registered
[Tue Oct 27 15:26:09 2026] io scheduler kyber registered
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA memory f7910000
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Tue Oct 27 15:26:09 2026] Console: switching to colour frame buffer device 90x30
[Tue Oct 27 15:26:09 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Tue Oct 27 15:26:09 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Tue Oct 27 15:26:09 2026] vc-sm: Videocore shared memory driver
[Tue Oct 27 15:26:09 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Tue Oct 27 15:26:09 2026] brd: module loaded
[Tue Oct 27 15:26:09 2026] loop: module loaded
[Tue Oct 27 15:26:09 2026] Loading iSCSI transport class v2.0-870.
[Tue Oct 27 15:26:09 2026] libphy: Fixed MDIO Bus: probed
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver lan78xx
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver smsc95xx
[Tue Oct 27 15:26:09 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Tue Oct 27 15:26:09 2026] Core Release: 2.80a
[Tue Oct 27 15:26:09 2026] Setting default values for core params
[Tue Oct 27 15:26:09 2026] Finished setting default values for core params
[Tue Oct 27 15:26:09 2026] Using Buffer DMA mode
[Tue Oct 27 15:26:09 2026] Periodic Transfer Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] Multiprocessor Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Tue Oct 27 15:26:09 2026] Dedicated Tx FIFOs mode
[Tue Oct 27 15:26:09 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Tue Oct 27 15:26:09 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: Microframe scheduler enabled
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Tue Oct 27 15:26:09 2026] Init: Port Power? op_state=1
[Tue Oct 27 15:26:09 2026] Init: Power Port (0)
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Oct 27 15:26:09 2026] usb usb1: Product: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Tue Oct 27 15:26:09 2026] usb usb1: SerialNumber: 3f980000.usb
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: USB hub found
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: 1 port detected
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: NAK holdoff enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ split-transaction FSM enabled
[Tue Oct 27 15:26:09 2026] Module dwc_common_port init
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usb-storage
[Tue Oct 27 15:26:09 2026] mousedev: PS/2 mouse device common for all mice
[Tue Oct 27 15:26:09 2026] IR NEC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC5(x/sz) protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC6 protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR JVC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sony protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR SANYO protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sharp protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR MCE Keyboard/mouse protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR XMP protocol handler initialized
[Tue Oct 27 15:26:09 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Tue Oct 27 15:26:09 2026] bcm2835-cpufreq: min=600000 max=1200000
[Tue Oct 27 15:26:09 2026] sdhci: Secure Digital Host Controller Interface driver
[Tue Oct 27 15:26:09 2026] sdhci: Copyright(c) Pierre Ossman
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Tue Oct 27 15:26:09 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Tue Oct 27 15:26:09 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbhid
[Tue Oct 27 15:26:09 2026] usbhid: USB HID core driver
[Tue Oct 27 15:26:09 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: start
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: end - returning 0
[Tue Oct 27 15:26:09 2026] Initializing XFRM netlink socket
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 17
[Tue Oct 27 15:26:09 2026] Key type dns_resolver registered
[Tue Oct 27 15:26:09 2026] Registering SWP/SWPB emulation handler
[Tue Oct 27 15:26:09 2026] registered taskstats version 1
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Tue Oct 27 15:26:09 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Tue Oct 27 15:26:09 2026] sdhost: log_buf @ b7907000 (f7907000)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Tue Oct 27 15:26:09 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Tue Oct 27 15:26:09 2026] of_cfs_init
[Tue Oct 27 15:26:09 2026] of_cfs_init: OK
[Tue Oct 27 15:26:09 2026] Waiting for root device /dev/mmcblk0p2...
[Tue Oct 27 15:26:09 2026] random: fast init done
[Tue Oct 27 15:26:09 2026] Indeed it is in host mode hprt0 = 00021501
[Tue Oct 27 15:26:09 2026] mmc1: new high speed SDIO card at address 0001
[Tue Oct 27 15:26:09 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Tue Oct 27 15:26:09 2026] mmc0: new high speed SDHC card at address aaaa
[Tue Oct 27 15:26:09 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Tue Oct 27 15:26:10 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue Oct 27 15:26:10 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Tue Oct 27 15:26:10 2026] Indeed it is in host mode hprt0 = 00001101
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): recovery complete
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:10 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Oct 27 15:26:10 2026] devtmpfs: mounted
[Tue Oct 27 15:26:10 2026] Freeing unused kernel memory: 1024K
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: USB hub found
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: 5 ports detected
[Tue Oct 27 15:26:10 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Tue Oct 27 15:26:10 2026] systemd[1]: System time before build time, advancing clock.
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] smsc95xx v1.0.6
[Tue Oct 27 15:26:10 2026] NET: Registered protocol family 10
[Tue Oct 27 15:26:10 2026] Segment Routing with IPv6
[Tue Oct 27 15:26:10 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Tue Oct 27 15:26:10 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Tue Oct 27 15:26:10 2026] systemd[1]: Detected architecture arm.
[Tue Oct 27 15:26:10 2026] systemd[1]: Set hostname to <TM06202302>.
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Tue Oct 27 15:26:10 2026] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:11 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on Journal Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Kernel Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Control Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Created slice System Slice.
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting POSIX Message Queue File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting RPC Pipe File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Starting Set the console keyboard layout...
[Tue Oct 27 15:26:11 2026] i2c /dev entries driver
[Tue Oct 27 15:26:12 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Tue Oct 27 15:26:12 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Tue Oct 27 15:26:12 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Tue Oct 27 15:26:13 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Tue Oct 27 15:26:13 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver brcmfmac
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial_generic
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for generic
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver cp210x
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for cp210x
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] systemd-journald[102]: Received request to flush runtime journal from PID 1
[Tue Oct 27 15:26:14 2026] uart-pl011 3f201000.serial: no DMA platform data
[Tue Oct 27 15:26:15 2026] random: crng init done
[Tue Oct 27 15:26:15 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Tue Oct 27 15:26:16 2026] brcmfmac: power management disabled
[Tue Oct 27 15:26:16 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Tue Oct 27 15:26:17 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:26:17 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Tue Oct 27 15:26:17 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Tue Oct 27 15:26:19 2026] Bluetooth: Core ver 2.22
[Tue Oct 27 15:26:19 2026] NET: Registered protocol family 31
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI device and connection manager initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: L2CAP socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: SCO socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART driver ver 2.3
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol H4 registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Broadcom registered
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP filters: protocol multicast
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM TTY layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM ver 1.11
[Tue Oct 27 15:26:20 2026] NET: Registered protocol family 38
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): recovery complete
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:22 2026] fuse init (API version 7.26)
[Tue Oct 27 15:26:24 2026] usb 1-1.2: USB disconnect, device number 4
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.0: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.1: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.2: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.3: device disconnected
[Tue Oct 27 15:26:25 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:26 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:41:40 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:41:42 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:46:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:46:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:47:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:47:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:48:24 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:48:26 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:09:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 17:17:57 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:17:59 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:21:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:21:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:41:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:41:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:56:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:57:03 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:12:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:12:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:25 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:50 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 19:34:19 2026] Voltage normalised (0x00000000)
[Tue Oct 27 19:34:21 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:13:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:13:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:25:30 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 20:33:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:33:53 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:55 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:42:51 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:42:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:54:28 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:54:30 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:26:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:26:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:52:11 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:52:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:56:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:56:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:06:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:06:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:24:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:24:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:27:00 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:27:02 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:34:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 22:37:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:38:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:39:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:39:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:41:23 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:41:25 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:54:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:54:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:06:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 23:07:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:07:48 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:12:12 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:12:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:14:29 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:14:31 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:27:58 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:28:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:34:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:34:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:38:41 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:38:43 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:42:03 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:42:06 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:54:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:55:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:59:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:59:54 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:03:10 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:03:12 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:24:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 00:39:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:39:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:54:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:54:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:01:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:14:12 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:14:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:24:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:24:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:34:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:34:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:58:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:58:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:11:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:11:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:37:01 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:37:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:42:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:42:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:59:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:59:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:01:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:13:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:13:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:15:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:15:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:55:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:55:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:13:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:13:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:43:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:43:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:49:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:49:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:02:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:02:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:10:41 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:10:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:20:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:20:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:25:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:25:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:26:57 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:26:59 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:28:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:28:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:43:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:43:48 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:50:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:50:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:55:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:55:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:04:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:10:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:11:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:22:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:22:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:47:50 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:47:52 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:50:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:55:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:55:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:16:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:16:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:24:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:35:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:35:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:47:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:48:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:50:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:50:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:53:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:53:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:14:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:14:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:15:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:15:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:21:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:21:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:23:55 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:23:57 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:33:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:33:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:40:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:40:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:48:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 08:56:29 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:31 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:56:53 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:38:42 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:38:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:43:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:43:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:45:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 09:50:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:50:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:00:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:00:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:01:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:01:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:13:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:13:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:19:09 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:19:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:29:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:29:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:38:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:39:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:44:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:46:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:14:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:14:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:20:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:20:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:22:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:29:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:29:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:44:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:44:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:46:31 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 12:24:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:25:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 12:32:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 12:43:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:43:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 13:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:17:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 14:38:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 14:38:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 14:50:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 15:08:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 15:08:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:28:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:28:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:37:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:37:55 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:52:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:52:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:13:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:14:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:16:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:16:20 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:31:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:31:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:49:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:49:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:53:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:53:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:57:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:57:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:05:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:05:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:06:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:06:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:08:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:08:26 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:39:46 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 18:41:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:41:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:45:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:45:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:23:25 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:23:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:29:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:29:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:02:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 20:07:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:07:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:17:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:18:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:41:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:41:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:48:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:48:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:16:14 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:16:16 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:24:27 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:24:29 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:27:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:27:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:30:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:30:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:39:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:39:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:40:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:40:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:43:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:43:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:47:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:47:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:49:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:49:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:55:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:55:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:09:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:09:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:11:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:11:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:26:47 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:26:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:29:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:29:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:40:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:41:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:13:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 23:13:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:48:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:34:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:40:13 2026] Voltage normalised (0x00000000)
[Thu Oct 29 00:40:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:11:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:11:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:25:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:25:50 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:27:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:27:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:36:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:36:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:37:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 01:41:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:41:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:42:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:42:12 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:58:56 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:58:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:21:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:21:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:44:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:44:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:55:18 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:55:20 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:59:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:59:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:05:24 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:45 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:28:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:28:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:39:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:39:45 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:43:23 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:43:25 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:01:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:01:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:10:07 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 04:12:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:12:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:14:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:14:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:19:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:19:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:21:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:21:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:22:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:22:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:09:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:09:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:15:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:15:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:30:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:30:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:34:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:34:51 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:36:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 05:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:01:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:01:11 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:02:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:03:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:05:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:05:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:13:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:14:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:23:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:23:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:30:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:30:27 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:59:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:59:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 07:05:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 07:13:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 07:13:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:26:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:26:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:27 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:29 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:33:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:13 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:27:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:27:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:28:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:28:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:29:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:30:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:37:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:37:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:38:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:38:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:45:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:45:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:04:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:04:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:13:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:13:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:15:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:15:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:35:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:35:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:44:50 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:44:54 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:58:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:58:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 11:14:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:14:49 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:15:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:15:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:26:11 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:26:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:06:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:17 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:22:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:22:56 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:31:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:31:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:48:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:49:00 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 13:06:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:06:52 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:08:00 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:08:02 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:21 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:44 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:23:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:23:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:06:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:10:47 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:10:49 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:21:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:21:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:39:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 15:17:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 15:17:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:18:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:18:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:19:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:19:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:23:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 16:37:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:44:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:44:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:49:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:49:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:54:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 17:16:07 2026] cp210x ttyUSB1: failed to get comm status: -71
[Thu Oct 29 17:18:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:19:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:37:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:56:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:56:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:06:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:07:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:53:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:58:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:58:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:01:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 19:04:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:04:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:28:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:28:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:32:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:32:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:05:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:05:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:43:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:43:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:53:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 20:56:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:56:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 22:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 22:07:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 23:00:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:00:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:03:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:03:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:16:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:16:14 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:36:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:36:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:44:52 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:08:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:08:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:12:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:12:59 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:25:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:25:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:24 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:26 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:49:58 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:49:58 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:50:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:50:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:08:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:08:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:16:23 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:16:25 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 02:58:19 2026] Voltage normalised (0x00000000)
[Fri Oct 30 02:58:21 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:33:44 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:33:46 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:39:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:39:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:29:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:29:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:41:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:41:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:49:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:49:26 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:54:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:54:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:01:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:01:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:16:48 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 05:56:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:56:11 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:57:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:57:14 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:04:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:04:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:19:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 06:31:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:31:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:54:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:54:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:29:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:29:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:39:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:39:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:09:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:09:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:35 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:50:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:50:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:00:51 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:00:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:01:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:01:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:03:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:03:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:16 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:28:31 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:28:33 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:32:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:32:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:48:50 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:48:52 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:41:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:41:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:55:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:55:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:03:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:16:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:17:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:20:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:20:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:22:01 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:22:03 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:24:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:24:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:31:41 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:52:48 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:52:50 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:54:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:54:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 12:07:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:44:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 12:44:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 13:12:40 2026] Voltage normalised (0x00000000)
[Fri Oct 30 13:12:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:39:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:39:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:40:27 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:40:29 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:08:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:08:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:23:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:23:51 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:17:29 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:17:31 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:44:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:55:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:55:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:08:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:08:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:13:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:13:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 17:23:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:23:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:29:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:29:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:34:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:34:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 18:31:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 18:31:18 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:23:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:23:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:54:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:54:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 20:33:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 20:33:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:50:50 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:51:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:14:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 22:14:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 22:19:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:19:27 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:33:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:34:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:05:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:05:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:18:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:18:52 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:45:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:45:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:30 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:32 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:57:22 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:57:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:26:09 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:26:11 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:34:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:34:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:52:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 00:59:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:59:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 01:23:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 01:23:31 2026] Under-voltage detected! (0x00050005)

=================================================
=================================================

DateTime: 26-10-31 03:00:06

-------------------------------------------------

[Tue Oct 27 15:26:09 2026] Booting Linux on physical CPU 0x0
[Tue Oct 27 15:26:09 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Tue Oct 27 15:26:09 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Tue Oct 27 15:26:09 2026] CPU: div instructions available: patching division code
[Tue Oct 27 15:26:09 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Tue Oct 27 15:26:09 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Tue Oct 27 15:26:09 2026] Memory policy: Data cache writealloc
[Tue Oct 27 15:26:09 2026] cma: Reserved 8 MiB at 0x37800000
[Tue Oct 27 15:26:09 2026] On node 0 totalpages: 229376
[Tue Oct 27 15:26:09 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Tue Oct 27 15:26:09 2026]   Normal zone: 2016 pages used for memmap
[Tue Oct 27 15:26:09 2026]   Normal zone: 0 pages reserved
[Tue Oct 27 15:26:09 2026]   Normal zone: 229376 pages, LIFO batch:31
[Tue Oct 27 15:26:09 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Tue Oct 27 15:26:09 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Tue Oct 27 15:26:09 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Tue Oct 27 15:26:09 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Tue Oct 27 15:26:09 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Tue Oct 27 15:26:09 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Tue Oct 27 15:26:09 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Tue Oct 27 15:26:09 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Tue Oct 27 15:26:09 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Tue Oct 27 15:26:09 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Tue Oct 27 15:26:09 2026] ftrace: allocating 25298 entries in 75 pages
[Tue Oct 27 15:26:09 2026] Hierarchical RCU implementation.
[Tue Oct 27 15:26:09 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Tue Oct 27 15:26:09 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Tue Oct 27 15:26:09 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Tue Oct 27 15:26:09 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Tue Oct 27 15:26:09 2026] Switching to timer-based delay loop, resolution 52ns
[Tue Oct 27 15:26:09 2026] Console: colour dummy device 80x30
[Tue Oct 27 15:26:09 2026] console [tty1] enabled
[Tue Oct 27 15:26:09 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Tue Oct 27 15:26:09 2026] pid_max: default: 32768 minimum: 301
[Tue Oct 27 15:26:09 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Disabling memory control group subsystem
[Tue Oct 27 15:26:09 2026] CPU: Testing write buffer coherency: ok
[Tue Oct 27 15:26:09 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Tue Oct 27 15:26:09 2026] Setting up static identity map for 0x100000 - 0x10003c
[Tue Oct 27 15:26:09 2026] Hierarchical SRCU implementation.
[Tue Oct 27 15:26:09 2026] smp: Bringing up secondary CPUs ...
[Tue Oct 27 15:26:09 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Tue Oct 27 15:26:09 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Tue Oct 27 15:26:09 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Tue Oct 27 15:26:09 2026] smp: Brought up 1 node, 4 CPUs
[Tue Oct 27 15:26:09 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Tue Oct 27 15:26:09 2026] CPU: All CPU(s) started in HYP mode.
[Tue Oct 27 15:26:09 2026] CPU: Virtualization extensions available.
[Tue Oct 27 15:26:09 2026] devtmpfs: initialized
[Tue Oct 27 15:26:09 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Tue Oct 27 15:26:09 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Tue Oct 27 15:26:09 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Tue Oct 27 15:26:09 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] pinctrl core: initialized pinctrl subsystem
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 16
[Tue Oct 27 15:26:09 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Tue Oct 27 15:26:09 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Tue Oct 27 15:26:09 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Tue Oct 27 15:26:09 2026] Serial: AMBA PL011 UART driver
[Tue Oct 27 15:26:09 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Tue Oct 27 15:26:09 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Tue Oct 27 15:26:09 2026] SCSI subsystem initialized
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbfs
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver hub
[Tue Oct 27 15:26:09 2026] usbcore: registered new device driver usb
[Tue Oct 27 15:26:09 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Tue Oct 27 15:26:09 2026] clocksource: Switched to clocksource arch_sys_counter
[Tue Oct 27 15:26:09 2026] VFS: Disk quotas dquot_6.6.0
[Tue Oct 27 15:26:09 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Tue Oct 27 15:26:09 2026] FS-Cache: Loaded
[Tue Oct 27 15:26:09 2026] CacheFiles: Loaded
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 2
[Tue Oct 27 15:26:09 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Tue Oct 27 15:26:09 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Tue Oct 27 15:26:09 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 1
[Tue Oct 27 15:26:09 2026] RPC: Registered named UNIX socket transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered udp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Tue Oct 27 15:26:09 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Tue Oct 27 15:26:09 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Tue Oct 27 15:26:09 2026] FS-Cache: Netfs 'nfs' registered for caching
[Tue Oct 27 15:26:09 2026] NFS: Registering the id_resolver key type
[Tue Oct 27 15:26:09 2026] Key type id_resolver registered
[Tue Oct 27 15:26:09 2026] Key type id_legacy registered
[Tue Oct 27 15:26:09 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Tue Oct 27 15:26:09 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Tue Oct 27 15:26:09 2026] io scheduler noop registered
[Tue Oct 27 15:26:09 2026] io scheduler deadline registered (default)
[Tue Oct 27 15:26:09 2026] io scheduler cfq registered
[Tue Oct 27 15:26:09 2026] io scheduler mq-deadline registered
[Tue Oct 27 15:26:09 2026] io scheduler kyber registered
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA memory f7910000
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Tue Oct 27 15:26:09 2026] Console: switching to colour frame buffer device 90x30
[Tue Oct 27 15:26:09 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Tue Oct 27 15:26:09 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Tue Oct 27 15:26:09 2026] vc-sm: Videocore shared memory driver
[Tue Oct 27 15:26:09 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Tue Oct 27 15:26:09 2026] brd: module loaded
[Tue Oct 27 15:26:09 2026] loop: module loaded
[Tue Oct 27 15:26:09 2026] Loading iSCSI transport class v2.0-870.
[Tue Oct 27 15:26:09 2026] libphy: Fixed MDIO Bus: probed
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver lan78xx
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver smsc95xx
[Tue Oct 27 15:26:09 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Tue Oct 27 15:26:09 2026] Core Release: 2.80a
[Tue Oct 27 15:26:09 2026] Setting default values for core params
[Tue Oct 27 15:26:09 2026] Finished setting default values for core params
[Tue Oct 27 15:26:09 2026] Using Buffer DMA mode
[Tue Oct 27 15:26:09 2026] Periodic Transfer Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] Multiprocessor Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Tue Oct 27 15:26:09 2026] Dedicated Tx FIFOs mode
[Tue Oct 27 15:26:09 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Tue Oct 27 15:26:09 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: Microframe scheduler enabled
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Tue Oct 27 15:26:09 2026] Init: Port Power? op_state=1
[Tue Oct 27 15:26:09 2026] Init: Power Port (0)
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Oct 27 15:26:09 2026] usb usb1: Product: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Tue Oct 27 15:26:09 2026] usb usb1: SerialNumber: 3f980000.usb
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: USB hub found
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: 1 port detected
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: NAK holdoff enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ split-transaction FSM enabled
[Tue Oct 27 15:26:09 2026] Module dwc_common_port init
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usb-storage
[Tue Oct 27 15:26:09 2026] mousedev: PS/2 mouse device common for all mice
[Tue Oct 27 15:26:09 2026] IR NEC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC5(x/sz) protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC6 protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR JVC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sony protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR SANYO protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sharp protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR MCE Keyboard/mouse protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR XMP protocol handler initialized
[Tue Oct 27 15:26:09 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Tue Oct 27 15:26:09 2026] bcm2835-cpufreq: min=600000 max=1200000
[Tue Oct 27 15:26:09 2026] sdhci: Secure Digital Host Controller Interface driver
[Tue Oct 27 15:26:09 2026] sdhci: Copyright(c) Pierre Ossman
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Tue Oct 27 15:26:09 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Tue Oct 27 15:26:09 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbhid
[Tue Oct 27 15:26:09 2026] usbhid: USB HID core driver
[Tue Oct 27 15:26:09 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: start
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: end - returning 0
[Tue Oct 27 15:26:09 2026] Initializing XFRM netlink socket
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 17
[Tue Oct 27 15:26:09 2026] Key type dns_resolver registered
[Tue Oct 27 15:26:09 2026] Registering SWP/SWPB emulation handler
[Tue Oct 27 15:26:09 2026] registered taskstats version 1
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Tue Oct 27 15:26:09 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Tue Oct 27 15:26:09 2026] sdhost: log_buf @ b7907000 (f7907000)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Tue Oct 27 15:26:09 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Tue Oct 27 15:26:09 2026] of_cfs_init
[Tue Oct 27 15:26:09 2026] of_cfs_init: OK
[Tue Oct 27 15:26:09 2026] Waiting for root device /dev/mmcblk0p2...
[Tue Oct 27 15:26:09 2026] random: fast init done
[Tue Oct 27 15:26:09 2026] Indeed it is in host mode hprt0 = 00021501
[Tue Oct 27 15:26:09 2026] mmc1: new high speed SDIO card at address 0001
[Tue Oct 27 15:26:09 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Tue Oct 27 15:26:09 2026] mmc0: new high speed SDHC card at address aaaa
[Tue Oct 27 15:26:09 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Tue Oct 27 15:26:10 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue Oct 27 15:26:10 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Tue Oct 27 15:26:10 2026] Indeed it is in host mode hprt0 = 00001101
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): recovery complete
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:10 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Oct 27 15:26:10 2026] devtmpfs: mounted
[Tue Oct 27 15:26:10 2026] Freeing unused kernel memory: 1024K
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: USB hub found
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: 5 ports detected
[Tue Oct 27 15:26:10 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Tue Oct 27 15:26:10 2026] systemd[1]: System time before build time, advancing clock.
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] smsc95xx v1.0.6
[Tue Oct 27 15:26:10 2026] NET: Registered protocol family 10
[Tue Oct 27 15:26:10 2026] Segment Routing with IPv6
[Tue Oct 27 15:26:10 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Tue Oct 27 15:26:10 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Tue Oct 27 15:26:10 2026] systemd[1]: Detected architecture arm.
[Tue Oct 27 15:26:10 2026] systemd[1]: Set hostname to <TM06202302>.
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Tue Oct 27 15:26:10 2026] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:11 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on Journal Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Kernel Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Control Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Created slice System Slice.
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting POSIX Message Queue File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting RPC Pipe File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Starting Set the console keyboard layout...
[Tue Oct 27 15:26:11 2026] i2c /dev entries driver
[Tue Oct 27 15:26:12 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Tue Oct 27 15:26:12 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Tue Oct 27 15:26:12 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Tue Oct 27 15:26:13 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Tue Oct 27 15:26:13 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver brcmfmac
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial_generic
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for generic
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver cp210x
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for cp210x
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] systemd-journald[102]: Received request to flush runtime journal from PID 1
[Tue Oct 27 15:26:14 2026] uart-pl011 3f201000.serial: no DMA platform data
[Tue Oct 27 15:26:15 2026] random: crng init done
[Tue Oct 27 15:26:15 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Tue Oct 27 15:26:16 2026] brcmfmac: power management disabled
[Tue Oct 27 15:26:16 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Tue Oct 27 15:26:17 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:26:17 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Tue Oct 27 15:26:17 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Tue Oct 27 15:26:19 2026] Bluetooth: Core ver 2.22
[Tue Oct 27 15:26:19 2026] NET: Registered protocol family 31
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI device and connection manager initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: L2CAP socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: SCO socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART driver ver 2.3
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol H4 registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Broadcom registered
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP filters: protocol multicast
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM TTY layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM ver 1.11
[Tue Oct 27 15:26:20 2026] NET: Registered protocol family 38
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): recovery complete
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:22 2026] fuse init (API version 7.26)
[Tue Oct 27 15:26:24 2026] usb 1-1.2: USB disconnect, device number 4
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.0: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.1: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.2: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.3: device disconnected
[Tue Oct 27 15:26:25 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:26 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:41:40 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:41:42 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:46:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:46:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:47:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:47:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:48:24 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:48:26 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:09:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 17:17:57 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:17:59 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:21:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:21:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:41:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:41:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:56:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:57:03 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:12:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:12:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:25 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:50 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 19:34:19 2026] Voltage normalised (0x00000000)
[Tue Oct 27 19:34:21 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:13:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:13:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:25:30 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 20:33:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:33:53 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:55 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:42:51 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:42:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:54:28 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:54:30 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:26:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:26:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:52:11 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:52:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:56:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:56:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:06:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:06:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:24:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:24:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:27:00 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:27:02 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:34:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 22:37:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:38:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:39:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:39:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:41:23 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:41:25 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:54:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:54:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:06:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 23:07:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:07:48 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:12:12 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:12:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:14:29 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:14:31 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:27:58 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:28:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:34:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:34:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:38:41 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:38:43 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:42:03 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:42:06 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:54:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:55:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:59:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:59:54 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:03:10 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:03:12 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:24:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 00:39:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:39:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:54:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:54:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:01:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:14:12 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:14:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:24:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:24:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:34:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:34:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:58:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:58:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:11:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:11:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:37:01 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:37:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:42:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:42:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:59:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:59:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:01:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:13:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:13:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:15:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:15:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:55:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:55:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:13:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:13:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:43:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:43:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:49:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:49:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:02:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:02:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:10:41 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:10:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:20:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:20:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:25:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:25:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:26:57 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:26:59 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:28:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:28:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:43:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:43:48 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:50:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:50:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:55:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:55:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:04:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:10:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:11:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:22:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:22:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:47:50 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:47:52 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:50:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:55:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:55:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:16:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:16:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:24:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:35:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:35:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:47:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:48:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:50:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:50:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:53:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:53:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:14:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:14:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:15:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:15:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:21:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:21:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:23:55 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:23:57 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:33:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:33:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:40:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:40:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:48:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 08:56:29 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:31 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:56:53 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:38:42 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:38:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:43:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:43:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:45:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 09:50:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:50:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:00:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:00:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:01:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:01:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:13:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:13:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:19:09 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:19:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:29:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:29:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:38:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:39:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:44:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:46:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:14:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:14:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:20:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:20:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:22:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:29:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:29:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:44:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:44:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:46:31 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 12:24:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:25:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 12:32:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 12:43:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:43:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 13:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:17:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 14:38:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 14:38:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 14:50:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 15:08:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 15:08:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:28:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:28:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:37:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:37:55 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:52:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:52:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:13:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:14:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:16:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:16:20 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:31:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:31:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:49:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:49:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:53:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:53:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:57:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:57:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:05:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:05:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:06:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:06:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:08:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:08:26 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:39:46 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 18:41:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:41:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:45:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:45:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:23:25 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:23:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:29:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:29:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:02:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 20:07:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:07:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:17:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:18:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:41:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:41:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:48:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:48:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:16:14 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:16:16 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:24:27 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:24:29 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:27:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:27:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:30:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:30:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:39:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:39:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:40:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:40:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:43:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:43:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:47:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:47:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:49:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:49:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:55:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:55:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:09:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:09:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:11:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:11:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:26:47 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:26:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:29:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:29:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:40:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:41:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:13:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 23:13:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:48:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:34:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:40:13 2026] Voltage normalised (0x00000000)
[Thu Oct 29 00:40:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:11:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:11:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:25:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:25:50 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:27:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:27:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:36:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:36:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:37:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 01:41:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:41:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:42:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:42:12 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:58:56 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:58:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:21:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:21:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:44:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:44:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:55:18 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:55:20 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:59:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:59:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:05:24 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:45 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:28:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:28:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:39:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:39:45 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:43:23 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:43:25 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:01:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:01:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:10:07 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 04:12:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:12:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:14:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:14:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:19:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:19:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:21:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:21:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:22:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:22:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:09:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:09:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:15:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:15:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:30:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:30:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:34:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:34:51 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:36:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 05:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:01:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:01:11 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:02:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:03:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:05:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:05:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:13:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:14:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:23:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:23:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:30:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:30:27 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:59:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:59:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 07:05:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 07:13:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 07:13:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:26:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:26:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:27 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:29 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:33:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:13 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:27:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:27:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:28:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:28:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:29:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:30:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:37:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:37:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:38:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:38:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:45:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:45:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:04:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:04:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:13:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:13:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:15:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:15:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:35:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:35:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:44:50 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:44:54 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:58:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:58:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 11:14:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:14:49 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:15:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:15:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:26:11 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:26:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:06:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:17 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:22:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:22:56 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:31:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:31:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:48:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:49:00 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 13:06:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:06:52 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:08:00 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:08:02 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:21 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:44 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:23:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:23:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:06:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:10:47 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:10:49 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:21:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:21:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:39:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 15:17:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 15:17:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:18:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:18:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:19:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:19:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:23:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 16:37:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:44:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:44:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:49:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:49:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:54:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 17:16:07 2026] cp210x ttyUSB1: failed to get comm status: -71
[Thu Oct 29 17:18:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:19:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:37:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:56:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:56:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:06:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:07:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:53:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:58:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:58:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:01:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 19:04:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:04:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:28:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:28:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:32:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:32:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:05:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:05:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:43:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:43:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:53:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 20:56:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:56:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 22:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 22:07:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 23:00:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:00:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:03:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:03:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:16:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:16:14 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:36:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:36:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:44:52 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:08:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:08:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:12:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:12:59 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:25:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:25:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:24 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:26 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:49:58 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:49:58 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:50:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:50:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:08:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:08:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:16:23 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:16:25 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 02:58:19 2026] Voltage normalised (0x00000000)
[Fri Oct 30 02:58:21 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:33:44 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:33:46 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:39:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:39:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:29:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:29:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:41:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:41:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:49:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:49:26 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:54:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:54:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:01:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:01:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:16:48 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 05:56:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:56:11 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:57:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:57:14 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:04:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:04:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:19:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 06:31:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:31:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:54:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:54:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:29:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:29:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:39:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:39:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:09:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:09:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:35 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:50:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:50:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:00:51 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:00:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:01:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:01:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:03:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:03:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:16 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:28:31 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:28:33 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:32:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:32:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:48:50 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:48:52 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:41:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:41:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:55:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:55:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:03:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:16:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:17:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:20:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:20:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:22:01 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:22:03 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:24:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:24:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:31:41 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:52:48 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:52:50 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:54:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:54:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 12:07:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:44:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 12:44:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 13:12:40 2026] Voltage normalised (0x00000000)
[Fri Oct 30 13:12:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:39:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:39:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:40:27 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:40:29 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:08:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:08:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:23:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:23:51 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:17:29 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:17:31 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:44:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:55:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:55:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:08:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:08:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:13:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:13:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 17:23:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:23:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:29:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:29:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:34:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:34:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 18:31:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 18:31:18 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:23:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:23:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:54:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:54:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 20:33:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 20:33:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:50:50 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:51:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:14:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 22:14:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 22:19:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:19:27 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:33:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:34:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:05:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:05:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:18:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:18:52 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:45:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:45:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:30 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:32 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:57:22 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:57:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:26:09 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:26:11 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:34:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:34:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:52:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 00:59:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:59:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 01:23:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 01:23:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:07:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:07:12 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:35:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:35:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:46:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:47:00 2026] Under-voltage detected! (0x00050005)

=================================================
=================================================

DateTime: 26-10-31 04:00:06

-------------------------------------------------

[Tue Oct 27 15:26:09 2026] Booting Linux on physical CPU 0x0
[Tue Oct 27 15:26:09 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Tue Oct 27 15:26:09 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Tue Oct 27 15:26:09 2026] CPU: div instructions available: patching division code
[Tue Oct 27 15:26:09 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Tue Oct 27 15:26:09 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Tue Oct 27 15:26:09 2026] Memory policy: Data cache writealloc
[Tue Oct 27 15:26:09 2026] cma: Reserved 8 MiB at 0x37800000
[Tue Oct 27 15:26:09 2026] On node 0 totalpages: 229376
[Tue Oct 27 15:26:09 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Tue Oct 27 15:26:09 2026]   Normal zone: 2016 pages used for memmap
[Tue Oct 27 15:26:09 2026]   Normal zone: 0 pages reserved
[Tue Oct 27 15:26:09 2026]   Normal zone: 229376 pages, LIFO batch:31
[Tue Oct 27 15:26:09 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Tue Oct 27 15:26:09 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Tue Oct 27 15:26:09 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Tue Oct 27 15:26:09 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Tue Oct 27 15:26:09 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Tue Oct 27 15:26:09 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Tue Oct 27 15:26:09 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Tue Oct 27 15:26:09 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Tue Oct 27 15:26:09 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Tue Oct 27 15:26:09 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Tue Oct 27 15:26:09 2026] ftrace: allocating 25298 entries in 75 pages
[Tue Oct 27 15:26:09 2026] Hierarchical RCU implementation.
[Tue Oct 27 15:26:09 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Tue Oct 27 15:26:09 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Tue Oct 27 15:26:09 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Tue Oct 27 15:26:09 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Tue Oct 27 15:26:09 2026] Switching to timer-based delay loop, resolution 52ns
[Tue Oct 27 15:26:09 2026] Console: colour dummy device 80x30
[Tue Oct 27 15:26:09 2026] console [tty1] enabled
[Tue Oct 27 15:26:09 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Tue Oct 27 15:26:09 2026] pid_max: default: 32768 minimum: 301
[Tue Oct 27 15:26:09 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Disabling memory control group subsystem
[Tue Oct 27 15:26:09 2026] CPU: Testing write buffer coherency: ok
[Tue Oct 27 15:26:09 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Tue Oct 27 15:26:09 2026] Setting up static identity map for 0x100000 - 0x10003c
[Tue Oct 27 15:26:09 2026] Hierarchical SRCU implementation.
[Tue Oct 27 15:26:09 2026] smp: Bringing up secondary CPUs ...
[Tue Oct 27 15:26:09 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Tue Oct 27 15:26:09 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Tue Oct 27 15:26:09 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Tue Oct 27 15:26:09 2026] smp: Brought up 1 node, 4 CPUs
[Tue Oct 27 15:26:09 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Tue Oct 27 15:26:09 2026] CPU: All CPU(s) started in HYP mode.
[Tue Oct 27 15:26:09 2026] CPU: Virtualization extensions available.
[Tue Oct 27 15:26:09 2026] devtmpfs: initialized
[Tue Oct 27 15:26:09 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Tue Oct 27 15:26:09 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Tue Oct 27 15:26:09 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Tue Oct 27 15:26:09 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] pinctrl core: initialized pinctrl subsystem
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 16
[Tue Oct 27 15:26:09 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Tue Oct 27 15:26:09 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Tue Oct 27 15:26:09 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Tue Oct 27 15:26:09 2026] Serial: AMBA PL011 UART driver
[Tue Oct 27 15:26:09 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Tue Oct 27 15:26:09 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Tue Oct 27 15:26:09 2026] SCSI subsystem initialized
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbfs
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver hub
[Tue Oct 27 15:26:09 2026] usbcore: registered new device driver usb
[Tue Oct 27 15:26:09 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Tue Oct 27 15:26:09 2026] clocksource: Switched to clocksource arch_sys_counter
[Tue Oct 27 15:26:09 2026] VFS: Disk quotas dquot_6.6.0
[Tue Oct 27 15:26:09 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Tue Oct 27 15:26:09 2026] FS-Cache: Loaded
[Tue Oct 27 15:26:09 2026] CacheFiles: Loaded
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 2
[Tue Oct 27 15:26:09 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Tue Oct 27 15:26:09 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Tue Oct 27 15:26:09 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 1
[Tue Oct 27 15:26:09 2026] RPC: Registered named UNIX socket transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered udp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Tue Oct 27 15:26:09 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Tue Oct 27 15:26:09 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Tue Oct 27 15:26:09 2026] FS-Cache: Netfs 'nfs' registered for caching
[Tue Oct 27 15:26:09 2026] NFS: Registering the id_resolver key type
[Tue Oct 27 15:26:09 2026] Key type id_resolver registered
[Tue Oct 27 15:26:09 2026] Key type id_legacy registered
[Tue Oct 27 15:26:09 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Tue Oct 27 15:26:09 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Tue Oct 27 15:26:09 2026] io scheduler noop registered
[Tue Oct 27 15:26:09 2026] io scheduler deadline registered (default)
[Tue Oct 27 15:26:09 2026] io scheduler cfq registered
[Tue Oct 27 15:26:09 2026] io scheduler mq-deadline registered
[Tue Oct 27 15:26:09 2026] io scheduler kyber registered
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA memory f7910000
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Tue Oct 27 15:26:09 2026] Console: switching to colour frame buffer device 90x30
[Tue Oct 27 15:26:09 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Tue Oct 27 15:26:09 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Tue Oct 27 15:26:09 2026] vc-sm: Videocore shared memory driver
[Tue Oct 27 15:26:09 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Tue Oct 27 15:26:09 2026] brd: module loaded
[Tue Oct 27 15:26:09 2026] loop: module loaded
[Tue Oct 27 15:26:09 2026] Loading iSCSI transport class v2.0-870.
[Tue Oct 27 15:26:09 2026] libphy: Fixed MDIO Bus: probed
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver lan78xx
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver smsc95xx
[Tue Oct 27 15:26:09 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Tue Oct 27 15:26:09 2026] Core Release: 2.80a
[Tue Oct 27 15:26:09 2026] Setting default values for core params
[Tue Oct 27 15:26:09 2026] Finished setting default values for core params
[Tue Oct 27 15:26:09 2026] Using Buffer DMA mode
[Tue Oct 27 15:26:09 2026] Periodic Transfer Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] Multiprocessor Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Tue Oct 27 15:26:09 2026] Dedicated Tx FIFOs mode
[Tue Oct 27 15:26:09 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Tue Oct 27 15:26:09 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: Microframe scheduler enabled
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Tue Oct 27 15:26:09 2026] Init: Port Power? op_state=1
[Tue Oct 27 15:26:09 2026] Init: Power Port (0)
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Oct 27 15:26:09 2026] usb usb1: Product: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Tue Oct 27 15:26:09 2026] usb usb1: SerialNumber: 3f980000.usb
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: USB hub found
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: 1 port detected
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: NAK holdoff enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ split-transaction FSM enabled
[Tue Oct 27 15:26:09 2026] Module dwc_common_port init
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usb-storage
[Tue Oct 27 15:26:09 2026] mousedev: PS/2 mouse device common for all mice
[Tue Oct 27 15:26:09 2026] IR NEC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC5(x/sz) protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC6 protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR JVC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sony protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR SANYO protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sharp protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR MCE Keyboard/mouse protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR XMP protocol handler initialized
[Tue Oct 27 15:26:09 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Tue Oct 27 15:26:09 2026] bcm2835-cpufreq: min=600000 max=1200000
[Tue Oct 27 15:26:09 2026] sdhci: Secure Digital Host Controller Interface driver
[Tue Oct 27 15:26:09 2026] sdhci: Copyright(c) Pierre Ossman
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Tue Oct 27 15:26:09 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Tue Oct 27 15:26:09 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbhid
[Tue Oct 27 15:26:09 2026] usbhid: USB HID core driver
[Tue Oct 27 15:26:09 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: start
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: end - returning 0
[Tue Oct 27 15:26:09 2026] Initializing XFRM netlink socket
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 17
[Tue Oct 27 15:26:09 2026] Key type dns_resolver registered
[Tue Oct 27 15:26:09 2026] Registering SWP/SWPB emulation handler
[Tue Oct 27 15:26:09 2026] registered taskstats version 1
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Tue Oct 27 15:26:09 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Tue Oct 27 15:26:09 2026] sdhost: log_buf @ b7907000 (f7907000)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Tue Oct 27 15:26:09 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Tue Oct 27 15:26:09 2026] of_cfs_init
[Tue Oct 27 15:26:09 2026] of_cfs_init: OK
[Tue Oct 27 15:26:09 2026] Waiting for root device /dev/mmcblk0p2...
[Tue Oct 27 15:26:09 2026] random: fast init done
[Tue Oct 27 15:26:09 2026] Indeed it is in host mode hprt0 = 00021501
[Tue Oct 27 15:26:09 2026] mmc1: new high speed SDIO card at address 0001
[Tue Oct 27 15:26:09 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Tue Oct 27 15:26:09 2026] mmc0: new high speed SDHC card at address aaaa
[Tue Oct 27 15:26:09 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Tue Oct 27 15:26:10 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue Oct 27 15:26:10 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Tue Oct 27 15:26:10 2026] Indeed it is in host mode hprt0 = 00001101
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): recovery complete
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:10 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Oct 27 15:26:10 2026] devtmpfs: mounted
[Tue Oct 27 15:26:10 2026] Freeing unused kernel memory: 1024K
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: USB hub found
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: 5 ports detected
[Tue Oct 27 15:26:10 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Tue Oct 27 15:26:10 2026] systemd[1]: System time before build time, advancing clock.
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] smsc95xx v1.0.6
[Tue Oct 27 15:26:10 2026] NET: Registered protocol family 10
[Tue Oct 27 15:26:10 2026] Segment Routing with IPv6
[Tue Oct 27 15:26:10 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Tue Oct 27 15:26:10 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Tue Oct 27 15:26:10 2026] systemd[1]: Detected architecture arm.
[Tue Oct 27 15:26:10 2026] systemd[1]: Set hostname to <TM06202302>.
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Tue Oct 27 15:26:10 2026] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:11 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on Journal Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Kernel Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Control Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Created slice System Slice.
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting POSIX Message Queue File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting RPC Pipe File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Starting Set the console keyboard layout...
[Tue Oct 27 15:26:11 2026] i2c /dev entries driver
[Tue Oct 27 15:26:12 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Tue Oct 27 15:26:12 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Tue Oct 27 15:26:12 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Tue Oct 27 15:26:13 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Tue Oct 27 15:26:13 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver brcmfmac
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial_generic
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for generic
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver cp210x
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for cp210x
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] systemd-journald[102]: Received request to flush runtime journal from PID 1
[Tue Oct 27 15:26:14 2026] uart-pl011 3f201000.serial: no DMA platform data
[Tue Oct 27 15:26:15 2026] random: crng init done
[Tue Oct 27 15:26:15 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Tue Oct 27 15:26:16 2026] brcmfmac: power management disabled
[Tue Oct 27 15:26:16 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Tue Oct 27 15:26:17 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:26:17 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Tue Oct 27 15:26:17 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Tue Oct 27 15:26:19 2026] Bluetooth: Core ver 2.22
[Tue Oct 27 15:26:19 2026] NET: Registered protocol family 31
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI device and connection manager initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: L2CAP socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: SCO socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART driver ver 2.3
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol H4 registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Broadcom registered
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP filters: protocol multicast
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM TTY layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM ver 1.11
[Tue Oct 27 15:26:20 2026] NET: Registered protocol family 38
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): recovery complete
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:22 2026] fuse init (API version 7.26)
[Tue Oct 27 15:26:24 2026] usb 1-1.2: USB disconnect, device number 4
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.0: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.1: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.2: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.3: device disconnected
[Tue Oct 27 15:26:25 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:26 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:41:40 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:41:42 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:46:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:46:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:47:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:47:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:48:24 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:48:26 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:09:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 17:17:57 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:17:59 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:21:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:21:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:41:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:41:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:56:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:57:03 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:12:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:12:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:25 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:50 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 19:34:19 2026] Voltage normalised (0x00000000)
[Tue Oct 27 19:34:21 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:13:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:13:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:25:30 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 20:33:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:33:53 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:55 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:42:51 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:42:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:54:28 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:54:30 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:26:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:26:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:52:11 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:52:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:56:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:56:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:06:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:06:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:24:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:24:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:27:00 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:27:02 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:34:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 22:37:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:38:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:39:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:39:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:41:23 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:41:25 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:54:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:54:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:06:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 23:07:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:07:48 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:12:12 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:12:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:14:29 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:14:31 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:27:58 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:28:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:34:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:34:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:38:41 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:38:43 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:42:03 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:42:06 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:54:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:55:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:59:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:59:54 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:03:10 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:03:12 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:24:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 00:39:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:39:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:54:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:54:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:01:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:14:12 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:14:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:24:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:24:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:34:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:34:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:58:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:58:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:11:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:11:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:37:01 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:37:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:42:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:42:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:59:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:59:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:01:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:13:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:13:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:15:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:15:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:55:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:55:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:13:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:13:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:43:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:43:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:49:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:49:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:02:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:02:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:10:41 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:10:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:20:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:20:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:25:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:25:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:26:57 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:26:59 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:28:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:28:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:43:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:43:48 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:50:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:50:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:55:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:55:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:04:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:10:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:11:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:22:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:22:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:47:50 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:47:52 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:50:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:55:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:55:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:16:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:16:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:24:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:35:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:35:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:47:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:48:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:50:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:50:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:53:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:53:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:14:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:14:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:15:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:15:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:21:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:21:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:23:55 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:23:57 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:33:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:33:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:40:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:40:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:48:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 08:56:29 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:31 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:56:53 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:38:42 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:38:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:43:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:43:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:45:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 09:50:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:50:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:00:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:00:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:01:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:01:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:13:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:13:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:19:09 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:19:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:29:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:29:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:38:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:39:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:44:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:46:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:14:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:14:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:20:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:20:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:22:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:29:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:29:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:44:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:44:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:46:31 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 12:24:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:25:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 12:32:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 12:43:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:43:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 13:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:17:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 14:38:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 14:38:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 14:50:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 15:08:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 15:08:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:28:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:28:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:37:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:37:55 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:52:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:52:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:13:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:14:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:16:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:16:20 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:31:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:31:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:49:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:49:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:53:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:53:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:57:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:57:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:05:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:05:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:06:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:06:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:08:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:08:26 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:39:46 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 18:41:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:41:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:45:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:45:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:23:25 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:23:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:29:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:29:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:02:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 20:07:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:07:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:17:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:18:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:41:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:41:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:48:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:48:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:16:14 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:16:16 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:24:27 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:24:29 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:27:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:27:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:30:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:30:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:39:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:39:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:40:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:40:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:43:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:43:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:47:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:47:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:49:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:49:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:55:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:55:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:09:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:09:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:11:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:11:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:26:47 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:26:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:29:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:29:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:40:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:41:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:13:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 23:13:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:48:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:34:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:40:13 2026] Voltage normalised (0x00000000)
[Thu Oct 29 00:40:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:11:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:11:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:25:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:25:50 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:27:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:27:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:36:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:36:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:37:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 01:41:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:41:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:42:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:42:12 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:58:56 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:58:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:21:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:21:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:44:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:44:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:55:18 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:55:20 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:59:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:59:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:05:24 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:45 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:28:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:28:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:39:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:39:45 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:43:23 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:43:25 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:01:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:01:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:10:07 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 04:12:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:12:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:14:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:14:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:19:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:19:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:21:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:21:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:22:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:22:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:09:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:09:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:15:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:15:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:30:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:30:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:34:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:34:51 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:36:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 05:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:01:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:01:11 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:02:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:03:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:05:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:05:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:13:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:14:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:23:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:23:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:30:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:30:27 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:59:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:59:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 07:05:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 07:13:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 07:13:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:26:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:26:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:27 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:29 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:33:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:13 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:27:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:27:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:28:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:28:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:29:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:30:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:37:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:37:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:38:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:38:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:45:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:45:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:04:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:04:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:13:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:13:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:15:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:15:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:35:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:35:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:44:50 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:44:54 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:58:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:58:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 11:14:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:14:49 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:15:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:15:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:26:11 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:26:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:06:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:17 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:22:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:22:56 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:31:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:31:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:48:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:49:00 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 13:06:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:06:52 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:08:00 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:08:02 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:21 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:44 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:23:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:23:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:06:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:10:47 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:10:49 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:21:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:21:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:39:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 15:17:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 15:17:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:18:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:18:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:19:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:19:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:23:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 16:37:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:44:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:44:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:49:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:49:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:54:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 17:16:07 2026] cp210x ttyUSB1: failed to get comm status: -71
[Thu Oct 29 17:18:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:19:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:37:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:56:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:56:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:06:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:07:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:53:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:58:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:58:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:01:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 19:04:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:04:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:28:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:28:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:32:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:32:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:05:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:05:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:43:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:43:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:53:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 20:56:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:56:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 22:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 22:07:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 23:00:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:00:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:03:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:03:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:16:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:16:14 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:36:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:36:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:44:52 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:08:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:08:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:12:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:12:59 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:25:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:25:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:24 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:26 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:49:58 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:49:58 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:50:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:50:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:08:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:08:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:16:23 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:16:25 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 02:58:19 2026] Voltage normalised (0x00000000)
[Fri Oct 30 02:58:21 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:33:44 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:33:46 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:39:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:39:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:29:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:29:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:41:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:41:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:49:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:49:26 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:54:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:54:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:01:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:01:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:16:48 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 05:56:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:56:11 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:57:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:57:14 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:04:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:04:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:19:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 06:31:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:31:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:54:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:54:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:29:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:29:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:39:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:39:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:09:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:09:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:35 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:50:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:50:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:00:51 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:00:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:01:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:01:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:03:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:03:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:16 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:28:31 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:28:33 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:32:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:32:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:48:50 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:48:52 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:41:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:41:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:55:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:55:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:03:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:16:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:17:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:20:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:20:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:22:01 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:22:03 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:24:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:24:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:31:41 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:52:48 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:52:50 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:54:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:54:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 12:07:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:44:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 12:44:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 13:12:40 2026] Voltage normalised (0x00000000)
[Fri Oct 30 13:12:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:39:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:39:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:40:27 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:40:29 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:08:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:08:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:23:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:23:51 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:17:29 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:17:31 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:44:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:55:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:55:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:08:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:08:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:13:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:13:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 17:23:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:23:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:29:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:29:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:34:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:34:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 18:31:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 18:31:18 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:23:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:23:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:54:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:54:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 20:33:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 20:33:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:50:50 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:51:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:14:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 22:14:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 22:19:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:19:27 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:33:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:34:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:05:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:05:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:18:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:18:52 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:45:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:45:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:30 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:32 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:57:22 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:57:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:26:09 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:26:11 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:34:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:34:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:52:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 00:59:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:59:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 01:23:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 01:23:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:07:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:07:12 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:35:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:35:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:46:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:47:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:06:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:20:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:20:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:46:31 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:46:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:49:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:49:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:56:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:56:45 2026] Under-voltage detected! (0x00050005)

=================================================
=================================================

DateTime: 26-10-31 05:00:05

-------------------------------------------------

[Tue Oct 27 15:26:09 2026] Booting Linux on physical CPU 0x0
[Tue Oct 27 15:26:09 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Tue Oct 27 15:26:09 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Tue Oct 27 15:26:09 2026] CPU: div instructions available: patching division code
[Tue Oct 27 15:26:09 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Tue Oct 27 15:26:09 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Tue Oct 27 15:26:09 2026] Memory policy: Data cache writealloc
[Tue Oct 27 15:26:09 2026] cma: Reserved 8 MiB at 0x37800000
[Tue Oct 27 15:26:09 2026] On node 0 totalpages: 229376
[Tue Oct 27 15:26:09 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Tue Oct 27 15:26:09 2026]   Normal zone: 2016 pages used for memmap
[Tue Oct 27 15:26:09 2026]   Normal zone: 0 pages reserved
[Tue Oct 27 15:26:09 2026]   Normal zone: 229376 pages, LIFO batch:31
[Tue Oct 27 15:26:09 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Tue Oct 27 15:26:09 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Tue Oct 27 15:26:09 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Tue Oct 27 15:26:09 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Tue Oct 27 15:26:09 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Tue Oct 27 15:26:09 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Tue Oct 27 15:26:09 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Tue Oct 27 15:26:09 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Tue Oct 27 15:26:09 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Tue Oct 27 15:26:09 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Tue Oct 27 15:26:09 2026] ftrace: allocating 25298 entries in 75 pages
[Tue Oct 27 15:26:09 2026] Hierarchical RCU implementation.
[Tue Oct 27 15:26:09 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Tue Oct 27 15:26:09 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Tue Oct 27 15:26:09 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Tue Oct 27 15:26:09 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Tue Oct 27 15:26:09 2026] Switching to timer-based delay loop, resolution 52ns
[Tue Oct 27 15:26:09 2026] Console: colour dummy device 80x30
[Tue Oct 27 15:26:09 2026] console [tty1] enabled
[Tue Oct 27 15:26:09 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Tue Oct 27 15:26:09 2026] pid_max: default: 32768 minimum: 301
[Tue Oct 27 15:26:09 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Disabling memory control group subsystem
[Tue Oct 27 15:26:09 2026] CPU: Testing write buffer coherency: ok
[Tue Oct 27 15:26:09 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Tue Oct 27 15:26:09 2026] Setting up static identity map for 0x100000 - 0x10003c
[Tue Oct 27 15:26:09 2026] Hierarchical SRCU implementation.
[Tue Oct 27 15:26:09 2026] smp: Bringing up secondary CPUs ...
[Tue Oct 27 15:26:09 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Tue Oct 27 15:26:09 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Tue Oct 27 15:26:09 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Tue Oct 27 15:26:09 2026] smp: Brought up 1 node, 4 CPUs
[Tue Oct 27 15:26:09 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Tue Oct 27 15:26:09 2026] CPU: All CPU(s) started in HYP mode.
[Tue Oct 27 15:26:09 2026] CPU: Virtualization extensions available.
[Tue Oct 27 15:26:09 2026] devtmpfs: initialized
[Tue Oct 27 15:26:09 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Tue Oct 27 15:26:09 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Tue Oct 27 15:26:09 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Tue Oct 27 15:26:09 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] pinctrl core: initialized pinctrl subsystem
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 16
[Tue Oct 27 15:26:09 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Tue Oct 27 15:26:09 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Tue Oct 27 15:26:09 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Tue Oct 27 15:26:09 2026] Serial: AMBA PL011 UART driver
[Tue Oct 27 15:26:09 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Tue Oct 27 15:26:09 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Tue Oct 27 15:26:09 2026] SCSI subsystem initialized
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbfs
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver hub
[Tue Oct 27 15:26:09 2026] usbcore: registered new device driver usb
[Tue Oct 27 15:26:09 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Tue Oct 27 15:26:09 2026] clocksource: Switched to clocksource arch_sys_counter
[Tue Oct 27 15:26:09 2026] VFS: Disk quotas dquot_6.6.0
[Tue Oct 27 15:26:09 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Tue Oct 27 15:26:09 2026] FS-Cache: Loaded
[Tue Oct 27 15:26:09 2026] CacheFiles: Loaded
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 2
[Tue Oct 27 15:26:09 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Tue Oct 27 15:26:09 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Tue Oct 27 15:26:09 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 1
[Tue Oct 27 15:26:09 2026] RPC: Registered named UNIX socket transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered udp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Tue Oct 27 15:26:09 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Tue Oct 27 15:26:09 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Tue Oct 27 15:26:09 2026] FS-Cache: Netfs 'nfs' registered for caching
[Tue Oct 27 15:26:09 2026] NFS: Registering the id_resolver key type
[Tue Oct 27 15:26:09 2026] Key type id_resolver registered
[Tue Oct 27 15:26:09 2026] Key type id_legacy registered
[Tue Oct 27 15:26:09 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Tue Oct 27 15:26:09 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Tue Oct 27 15:26:09 2026] io scheduler noop registered
[Tue Oct 27 15:26:09 2026] io scheduler deadline registered (default)
[Tue Oct 27 15:26:09 2026] io scheduler cfq registered
[Tue Oct 27 15:26:09 2026] io scheduler mq-deadline registered
[Tue Oct 27 15:26:09 2026] io scheduler kyber registered
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA memory f7910000
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Tue Oct 27 15:26:09 2026] Console: switching to colour frame buffer device 90x30
[Tue Oct 27 15:26:09 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Tue Oct 27 15:26:09 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Tue Oct 27 15:26:09 2026] vc-sm: Videocore shared memory driver
[Tue Oct 27 15:26:09 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Tue Oct 27 15:26:09 2026] brd: module loaded
[Tue Oct 27 15:26:09 2026] loop: module loaded
[Tue Oct 27 15:26:09 2026] Loading iSCSI transport class v2.0-870.
[Tue Oct 27 15:26:09 2026] libphy: Fixed MDIO Bus: probed
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver lan78xx
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver smsc95xx
[Tue Oct 27 15:26:09 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Tue Oct 27 15:26:09 2026] Core Release: 2.80a
[Tue Oct 27 15:26:09 2026] Setting default values for core params
[Tue Oct 27 15:26:09 2026] Finished setting default values for core params
[Tue Oct 27 15:26:09 2026] Using Buffer DMA mode
[Tue Oct 27 15:26:09 2026] Periodic Transfer Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] Multiprocessor Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Tue Oct 27 15:26:09 2026] Dedicated Tx FIFOs mode
[Tue Oct 27 15:26:09 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Tue Oct 27 15:26:09 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: Microframe scheduler enabled
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Tue Oct 27 15:26:09 2026] Init: Port Power? op_state=1
[Tue Oct 27 15:26:09 2026] Init: Power Port (0)
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Oct 27 15:26:09 2026] usb usb1: Product: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Tue Oct 27 15:26:09 2026] usb usb1: SerialNumber: 3f980000.usb
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: USB hub found
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: 1 port detected
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: NAK holdoff enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ split-transaction FSM enabled
[Tue Oct 27 15:26:09 2026] Module dwc_common_port init
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usb-storage
[Tue Oct 27 15:26:09 2026] mousedev: PS/2 mouse device common for all mice
[Tue Oct 27 15:26:09 2026] IR NEC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC5(x/sz) protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC6 protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR JVC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sony protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR SANYO protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sharp protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR MCE Keyboard/mouse protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR XMP protocol handler initialized
[Tue Oct 27 15:26:09 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Tue Oct 27 15:26:09 2026] bcm2835-cpufreq: min=600000 max=1200000
[Tue Oct 27 15:26:09 2026] sdhci: Secure Digital Host Controller Interface driver
[Tue Oct 27 15:26:09 2026] sdhci: Copyright(c) Pierre Ossman
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Tue Oct 27 15:26:09 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Tue Oct 27 15:26:09 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbhid
[Tue Oct 27 15:26:09 2026] usbhid: USB HID core driver
[Tue Oct 27 15:26:09 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: start
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: end - returning 0
[Tue Oct 27 15:26:09 2026] Initializing XFRM netlink socket
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 17
[Tue Oct 27 15:26:09 2026] Key type dns_resolver registered
[Tue Oct 27 15:26:09 2026] Registering SWP/SWPB emulation handler
[Tue Oct 27 15:26:09 2026] registered taskstats version 1
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Tue Oct 27 15:26:09 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Tue Oct 27 15:26:09 2026] sdhost: log_buf @ b7907000 (f7907000)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Tue Oct 27 15:26:09 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Tue Oct 27 15:26:09 2026] of_cfs_init
[Tue Oct 27 15:26:09 2026] of_cfs_init: OK
[Tue Oct 27 15:26:09 2026] Waiting for root device /dev/mmcblk0p2...
[Tue Oct 27 15:26:09 2026] random: fast init done
[Tue Oct 27 15:26:09 2026] Indeed it is in host mode hprt0 = 00021501
[Tue Oct 27 15:26:09 2026] mmc1: new high speed SDIO card at address 0001
[Tue Oct 27 15:26:09 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Tue Oct 27 15:26:09 2026] mmc0: new high speed SDHC card at address aaaa
[Tue Oct 27 15:26:09 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Tue Oct 27 15:26:10 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue Oct 27 15:26:10 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Tue Oct 27 15:26:10 2026] Indeed it is in host mode hprt0 = 00001101
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): recovery complete
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:10 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Oct 27 15:26:10 2026] devtmpfs: mounted
[Tue Oct 27 15:26:10 2026] Freeing unused kernel memory: 1024K
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: USB hub found
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: 5 ports detected
[Tue Oct 27 15:26:10 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Tue Oct 27 15:26:10 2026] systemd[1]: System time before build time, advancing clock.
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] smsc95xx v1.0.6
[Tue Oct 27 15:26:10 2026] NET: Registered protocol family 10
[Tue Oct 27 15:26:10 2026] Segment Routing with IPv6
[Tue Oct 27 15:26:10 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Tue Oct 27 15:26:10 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Tue Oct 27 15:26:10 2026] systemd[1]: Detected architecture arm.
[Tue Oct 27 15:26:10 2026] systemd[1]: Set hostname to <TM06202302>.
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Tue Oct 27 15:26:10 2026] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:11 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on Journal Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Kernel Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Control Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Created slice System Slice.
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting POSIX Message Queue File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting RPC Pipe File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Starting Set the console keyboard layout...
[Tue Oct 27 15:26:11 2026] i2c /dev entries driver
[Tue Oct 27 15:26:12 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Tue Oct 27 15:26:12 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Tue Oct 27 15:26:12 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Tue Oct 27 15:26:13 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Tue Oct 27 15:26:13 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver brcmfmac
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial_generic
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for generic
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver cp210x
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for cp210x
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] systemd-journald[102]: Received request to flush runtime journal from PID 1
[Tue Oct 27 15:26:14 2026] uart-pl011 3f201000.serial: no DMA platform data
[Tue Oct 27 15:26:15 2026] random: crng init done
[Tue Oct 27 15:26:15 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Tue Oct 27 15:26:16 2026] brcmfmac: power management disabled
[Tue Oct 27 15:26:16 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Tue Oct 27 15:26:17 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:26:17 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Tue Oct 27 15:26:17 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Tue Oct 27 15:26:19 2026] Bluetooth: Core ver 2.22
[Tue Oct 27 15:26:19 2026] NET: Registered protocol family 31
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI device and connection manager initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: L2CAP socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: SCO socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART driver ver 2.3
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol H4 registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Broadcom registered
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP filters: protocol multicast
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM TTY layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM ver 1.11
[Tue Oct 27 15:26:20 2026] NET: Registered protocol family 38
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): recovery complete
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:22 2026] fuse init (API version 7.26)
[Tue Oct 27 15:26:24 2026] usb 1-1.2: USB disconnect, device number 4
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.0: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.1: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.2: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.3: device disconnected
[Tue Oct 27 15:26:25 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:26 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:41:40 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:41:42 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:46:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:46:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:47:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:47:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:48:24 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:48:26 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:09:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 17:17:57 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:17:59 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:21:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:21:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:41:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:41:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:56:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:57:03 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:12:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:12:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:25 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:50 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 19:34:19 2026] Voltage normalised (0x00000000)
[Tue Oct 27 19:34:21 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:13:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:13:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:25:30 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 20:33:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:33:53 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:55 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:42:51 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:42:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:54:28 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:54:30 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:26:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:26:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:52:11 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:52:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:56:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:56:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:06:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:06:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:24:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:24:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:27:00 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:27:02 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:34:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 22:37:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:38:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:39:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:39:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:41:23 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:41:25 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:54:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:54:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:06:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 23:07:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:07:48 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:12:12 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:12:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:14:29 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:14:31 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:27:58 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:28:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:34:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:34:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:38:41 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:38:43 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:42:03 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:42:06 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:54:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:55:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:59:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:59:54 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:03:10 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:03:12 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:24:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 00:39:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:39:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:54:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:54:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:01:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:14:12 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:14:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:24:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:24:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:34:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:34:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:58:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:58:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:11:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:11:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:37:01 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:37:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:42:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:42:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:59:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:59:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:01:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:13:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:13:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:15:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:15:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:55:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:55:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:13:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:13:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:43:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:43:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:49:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:49:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:02:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:02:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:10:41 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:10:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:20:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:20:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:25:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:25:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:26:57 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:26:59 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:28:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:28:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:43:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:43:48 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:50:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:50:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:55:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:55:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:04:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:10:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:11:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:22:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:22:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:47:50 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:47:52 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:50:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:55:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:55:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:16:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:16:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:24:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:35:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:35:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:47:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:48:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:50:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:50:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:53:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:53:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:14:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:14:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:15:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:15:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:21:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:21:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:23:55 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:23:57 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:33:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:33:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:40:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:40:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:48:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 08:56:29 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:31 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:56:53 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:38:42 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:38:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:43:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:43:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:45:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 09:50:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:50:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:00:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:00:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:01:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:01:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:13:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:13:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:19:09 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:19:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:29:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:29:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:38:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:39:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:44:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:46:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:14:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:14:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:20:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:20:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:22:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:29:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:29:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:44:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:44:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:46:31 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 12:24:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:25:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 12:32:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 12:43:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:43:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 13:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:17:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 14:38:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 14:38:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 14:50:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 15:08:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 15:08:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:28:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:28:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:37:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:37:55 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:52:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:52:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:13:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:14:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:16:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:16:20 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:31:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:31:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:49:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:49:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:53:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:53:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:57:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:57:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:05:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:05:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:06:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:06:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:08:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:08:26 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:39:46 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 18:41:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:41:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:45:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:45:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:23:25 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:23:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:29:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:29:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:02:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 20:07:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:07:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:17:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:18:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:41:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:41:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:48:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:48:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:16:14 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:16:16 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:24:27 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:24:29 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:27:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:27:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:30:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:30:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:39:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:39:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:40:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:40:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:43:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:43:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:47:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:47:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:49:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:49:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:55:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:55:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:09:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:09:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:11:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:11:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:26:47 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:26:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:29:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:29:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:40:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:41:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:13:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 23:13:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:48:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:34:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:40:13 2026] Voltage normalised (0x00000000)
[Thu Oct 29 00:40:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:11:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:11:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:25:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:25:50 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:27:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:27:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:36:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:36:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:37:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 01:41:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:41:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:42:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:42:12 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:58:56 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:58:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:21:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:21:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:44:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:44:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:55:18 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:55:20 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:59:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:59:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:05:24 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:45 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:28:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:28:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:39:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:39:45 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:43:23 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:43:25 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:01:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:01:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:10:07 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 04:12:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:12:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:14:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:14:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:19:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:19:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:21:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:21:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:22:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:22:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:09:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:09:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:15:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:15:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:30:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:30:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:34:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:34:51 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:36:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 05:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:01:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:01:11 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:02:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:03:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:05:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:05:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:13:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:14:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:23:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:23:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:30:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:30:27 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:59:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:59:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 07:05:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 07:13:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 07:13:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:26:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:26:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:27 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:29 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:33:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:13 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:27:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:27:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:28:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:28:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:29:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:30:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:37:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:37:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:38:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:38:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:45:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:45:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:04:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:04:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:13:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:13:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:15:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:15:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:35:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:35:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:44:50 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:44:54 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:58:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:58:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 11:14:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:14:49 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:15:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:15:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:26:11 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:26:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:06:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:17 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:22:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:22:56 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:31:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:31:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:48:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:49:00 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 13:06:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:06:52 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:08:00 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:08:02 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:21 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:44 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:23:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:23:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:06:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:10:47 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:10:49 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:21:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:21:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:39:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 15:17:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 15:17:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:18:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:18:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:19:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:19:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:23:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 16:37:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:44:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:44:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:49:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:49:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:54:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 17:16:07 2026] cp210x ttyUSB1: failed to get comm status: -71
[Thu Oct 29 17:18:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:19:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:37:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:56:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:56:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:06:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:07:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:53:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:58:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:58:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:01:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 19:04:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:04:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:28:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:28:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:32:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:32:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:05:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:05:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:43:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:43:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:53:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 20:56:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:56:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 22:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 22:07:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 23:00:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:00:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:03:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:03:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:16:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:16:14 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:36:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:36:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:44:52 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:08:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:08:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:12:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:12:59 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:25:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:25:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:24 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:26 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:49:58 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:49:58 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:50:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:50:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:08:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:08:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:16:23 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:16:25 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 02:58:19 2026] Voltage normalised (0x00000000)
[Fri Oct 30 02:58:21 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:33:44 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:33:46 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:39:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:39:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:29:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:29:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:41:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:41:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:49:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:49:26 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:54:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:54:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:01:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:01:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:16:48 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 05:56:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:56:11 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:57:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:57:14 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:04:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:04:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:19:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 06:31:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:31:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:54:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:54:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:29:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:29:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:39:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:39:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:09:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:09:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:35 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:50:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:50:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:00:51 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:00:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:01:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:01:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:03:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:03:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:16 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:28:31 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:28:33 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:32:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:32:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:48:50 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:48:52 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:41:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:41:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:55:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:55:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:03:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:16:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:17:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:20:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:20:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:22:01 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:22:03 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:24:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:24:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:31:41 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:52:48 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:52:50 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:54:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:54:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 12:07:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:44:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 12:44:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 13:12:40 2026] Voltage normalised (0x00000000)
[Fri Oct 30 13:12:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:39:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:39:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:40:27 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:40:29 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:08:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:08:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:23:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:23:51 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:17:29 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:17:31 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:44:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:55:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:55:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:08:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:08:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:13:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:13:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 17:23:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:23:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:29:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:29:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:34:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:34:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 18:31:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 18:31:18 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:23:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:23:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:54:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:54:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 20:33:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 20:33:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:50:50 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:51:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:14:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 22:14:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 22:19:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:19:27 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:33:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:34:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:05:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:05:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:18:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:18:52 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:45:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:45:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:30 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:32 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:57:22 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:57:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:26:09 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:26:11 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:34:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:34:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:52:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 00:59:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:59:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 01:23:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 01:23:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:07:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:07:12 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:35:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:35:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:46:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:47:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:06:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:20:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:20:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:46:31 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:46:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:49:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:49:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:56:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:56:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:04:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:04:58 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:08:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:22 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:47:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:53:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:54:01 2026] Under-voltage detected! (0x00050005)

=================================================
=================================================

DateTime: 26-10-31 06:00:05

-------------------------------------------------

[Tue Oct 27 15:26:09 2026] Booting Linux on physical CPU 0x0
[Tue Oct 27 15:26:09 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Tue Oct 27 15:26:09 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Tue Oct 27 15:26:09 2026] CPU: div instructions available: patching division code
[Tue Oct 27 15:26:09 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Tue Oct 27 15:26:09 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Tue Oct 27 15:26:09 2026] Memory policy: Data cache writealloc
[Tue Oct 27 15:26:09 2026] cma: Reserved 8 MiB at 0x37800000
[Tue Oct 27 15:26:09 2026] On node 0 totalpages: 229376
[Tue Oct 27 15:26:09 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Tue Oct 27 15:26:09 2026]   Normal zone: 2016 pages used for memmap
[Tue Oct 27 15:26:09 2026]   Normal zone: 0 pages reserved
[Tue Oct 27 15:26:09 2026]   Normal zone: 229376 pages, LIFO batch:31
[Tue Oct 27 15:26:09 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Tue Oct 27 15:26:09 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Tue Oct 27 15:26:09 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Tue Oct 27 15:26:09 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Tue Oct 27 15:26:09 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Tue Oct 27 15:26:09 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Tue Oct 27 15:26:09 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Tue Oct 27 15:26:09 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Tue Oct 27 15:26:09 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Tue Oct 27 15:26:09 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Tue Oct 27 15:26:09 2026] ftrace: allocating 25298 entries in 75 pages
[Tue Oct 27 15:26:09 2026] Hierarchical RCU implementation.
[Tue Oct 27 15:26:09 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Tue Oct 27 15:26:09 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Tue Oct 27 15:26:09 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Tue Oct 27 15:26:09 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Tue Oct 27 15:26:09 2026] Switching to timer-based delay loop, resolution 52ns
[Tue Oct 27 15:26:09 2026] Console: colour dummy device 80x30
[Tue Oct 27 15:26:09 2026] console [tty1] enabled
[Tue Oct 27 15:26:09 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Tue Oct 27 15:26:09 2026] pid_max: default: 32768 minimum: 301
[Tue Oct 27 15:26:09 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Disabling memory control group subsystem
[Tue Oct 27 15:26:09 2026] CPU: Testing write buffer coherency: ok
[Tue Oct 27 15:26:09 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Tue Oct 27 15:26:09 2026] Setting up static identity map for 0x100000 - 0x10003c
[Tue Oct 27 15:26:09 2026] Hierarchical SRCU implementation.
[Tue Oct 27 15:26:09 2026] smp: Bringing up secondary CPUs ...
[Tue Oct 27 15:26:09 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Tue Oct 27 15:26:09 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Tue Oct 27 15:26:09 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Tue Oct 27 15:26:09 2026] smp: Brought up 1 node, 4 CPUs
[Tue Oct 27 15:26:09 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Tue Oct 27 15:26:09 2026] CPU: All CPU(s) started in HYP mode.
[Tue Oct 27 15:26:09 2026] CPU: Virtualization extensions available.
[Tue Oct 27 15:26:09 2026] devtmpfs: initialized
[Tue Oct 27 15:26:09 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Tue Oct 27 15:26:09 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Tue Oct 27 15:26:09 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Tue Oct 27 15:26:09 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] pinctrl core: initialized pinctrl subsystem
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 16
[Tue Oct 27 15:26:09 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Tue Oct 27 15:26:09 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Tue Oct 27 15:26:09 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Tue Oct 27 15:26:09 2026] Serial: AMBA PL011 UART driver
[Tue Oct 27 15:26:09 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Tue Oct 27 15:26:09 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Tue Oct 27 15:26:09 2026] SCSI subsystem initialized
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbfs
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver hub
[Tue Oct 27 15:26:09 2026] usbcore: registered new device driver usb
[Tue Oct 27 15:26:09 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Tue Oct 27 15:26:09 2026] clocksource: Switched to clocksource arch_sys_counter
[Tue Oct 27 15:26:09 2026] VFS: Disk quotas dquot_6.6.0
[Tue Oct 27 15:26:09 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Tue Oct 27 15:26:09 2026] FS-Cache: Loaded
[Tue Oct 27 15:26:09 2026] CacheFiles: Loaded
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 2
[Tue Oct 27 15:26:09 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Tue Oct 27 15:26:09 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Tue Oct 27 15:26:09 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 1
[Tue Oct 27 15:26:09 2026] RPC: Registered named UNIX socket transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered udp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Tue Oct 27 15:26:09 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Tue Oct 27 15:26:09 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Tue Oct 27 15:26:09 2026] FS-Cache: Netfs 'nfs' registered for caching
[Tue Oct 27 15:26:09 2026] NFS: Registering the id_resolver key type
[Tue Oct 27 15:26:09 2026] Key type id_resolver registered
[Tue Oct 27 15:26:09 2026] Key type id_legacy registered
[Tue Oct 27 15:26:09 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Tue Oct 27 15:26:09 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Tue Oct 27 15:26:09 2026] io scheduler noop registered
[Tue Oct 27 15:26:09 2026] io scheduler deadline registered (default)
[Tue Oct 27 15:26:09 2026] io scheduler cfq registered
[Tue Oct 27 15:26:09 2026] io scheduler mq-deadline registered
[Tue Oct 27 15:26:09 2026] io scheduler kyber registered
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA memory f7910000
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Tue Oct 27 15:26:09 2026] Console: switching to colour frame buffer device 90x30
[Tue Oct 27 15:26:09 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Tue Oct 27 15:26:09 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Tue Oct 27 15:26:09 2026] vc-sm: Videocore shared memory driver
[Tue Oct 27 15:26:09 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Tue Oct 27 15:26:09 2026] brd: module loaded
[Tue Oct 27 15:26:09 2026] loop: module loaded
[Tue Oct 27 15:26:09 2026] Loading iSCSI transport class v2.0-870.
[Tue Oct 27 15:26:09 2026] libphy: Fixed MDIO Bus: probed
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver lan78xx
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver smsc95xx
[Tue Oct 27 15:26:09 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Tue Oct 27 15:26:09 2026] Core Release: 2.80a
[Tue Oct 27 15:26:09 2026] Setting default values for core params
[Tue Oct 27 15:26:09 2026] Finished setting default values for core params
[Tue Oct 27 15:26:09 2026] Using Buffer DMA mode
[Tue Oct 27 15:26:09 2026] Periodic Transfer Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] Multiprocessor Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Tue Oct 27 15:26:09 2026] Dedicated Tx FIFOs mode
[Tue Oct 27 15:26:09 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Tue Oct 27 15:26:09 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: Microframe scheduler enabled
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Tue Oct 27 15:26:09 2026] Init: Port Power? op_state=1
[Tue Oct 27 15:26:09 2026] Init: Power Port (0)
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Oct 27 15:26:09 2026] usb usb1: Product: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Tue Oct 27 15:26:09 2026] usb usb1: SerialNumber: 3f980000.usb
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: USB hub found
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: 1 port detected
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: NAK holdoff enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ split-transaction FSM enabled
[Tue Oct 27 15:26:09 2026] Module dwc_common_port init
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usb-storage
[Tue Oct 27 15:26:09 2026] mousedev: PS/2 mouse device common for all mice
[Tue Oct 27 15:26:09 2026] IR NEC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC5(x/sz) protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC6 protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR JVC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sony protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR SANYO protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sharp protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR MCE Keyboard/mouse protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR XMP protocol handler initialized
[Tue Oct 27 15:26:09 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Tue Oct 27 15:26:09 2026] bcm2835-cpufreq: min=600000 max=1200000
[Tue Oct 27 15:26:09 2026] sdhci: Secure Digital Host Controller Interface driver
[Tue Oct 27 15:26:09 2026] sdhci: Copyright(c) Pierre Ossman
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Tue Oct 27 15:26:09 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Tue Oct 27 15:26:09 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbhid
[Tue Oct 27 15:26:09 2026] usbhid: USB HID core driver
[Tue Oct 27 15:26:09 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: start
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: end - returning 0
[Tue Oct 27 15:26:09 2026] Initializing XFRM netlink socket
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 17
[Tue Oct 27 15:26:09 2026] Key type dns_resolver registered
[Tue Oct 27 15:26:09 2026] Registering SWP/SWPB emulation handler
[Tue Oct 27 15:26:09 2026] registered taskstats version 1
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Tue Oct 27 15:26:09 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Tue Oct 27 15:26:09 2026] sdhost: log_buf @ b7907000 (f7907000)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Tue Oct 27 15:26:09 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Tue Oct 27 15:26:09 2026] of_cfs_init
[Tue Oct 27 15:26:09 2026] of_cfs_init: OK
[Tue Oct 27 15:26:09 2026] Waiting for root device /dev/mmcblk0p2...
[Tue Oct 27 15:26:09 2026] random: fast init done
[Tue Oct 27 15:26:09 2026] Indeed it is in host mode hprt0 = 00021501
[Tue Oct 27 15:26:09 2026] mmc1: new high speed SDIO card at address 0001
[Tue Oct 27 15:26:09 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Tue Oct 27 15:26:09 2026] mmc0: new high speed SDHC card at address aaaa
[Tue Oct 27 15:26:09 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Tue Oct 27 15:26:10 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue Oct 27 15:26:10 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Tue Oct 27 15:26:10 2026] Indeed it is in host mode hprt0 = 00001101
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): recovery complete
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:10 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Oct 27 15:26:10 2026] devtmpfs: mounted
[Tue Oct 27 15:26:10 2026] Freeing unused kernel memory: 1024K
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: USB hub found
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: 5 ports detected
[Tue Oct 27 15:26:10 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Tue Oct 27 15:26:10 2026] systemd[1]: System time before build time, advancing clock.
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] smsc95xx v1.0.6
[Tue Oct 27 15:26:10 2026] NET: Registered protocol family 10
[Tue Oct 27 15:26:10 2026] Segment Routing with IPv6
[Tue Oct 27 15:26:10 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Tue Oct 27 15:26:10 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Tue Oct 27 15:26:10 2026] systemd[1]: Detected architecture arm.
[Tue Oct 27 15:26:10 2026] systemd[1]: Set hostname to <TM06202302>.
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Tue Oct 27 15:26:10 2026] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:11 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on Journal Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Kernel Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Control Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Created slice System Slice.
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting POSIX Message Queue File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting RPC Pipe File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Starting Set the console keyboard layout...
[Tue Oct 27 15:26:11 2026] i2c /dev entries driver
[Tue Oct 27 15:26:12 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Tue Oct 27 15:26:12 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Tue Oct 27 15:26:12 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Tue Oct 27 15:26:13 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Tue Oct 27 15:26:13 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver brcmfmac
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial_generic
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for generic
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver cp210x
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for cp210x
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] systemd-journald[102]: Received request to flush runtime journal from PID 1
[Tue Oct 27 15:26:14 2026] uart-pl011 3f201000.serial: no DMA platform data
[Tue Oct 27 15:26:15 2026] random: crng init done
[Tue Oct 27 15:26:15 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Tue Oct 27 15:26:16 2026] brcmfmac: power management disabled
[Tue Oct 27 15:26:16 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Tue Oct 27 15:26:17 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:26:17 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Tue Oct 27 15:26:17 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Tue Oct 27 15:26:19 2026] Bluetooth: Core ver 2.22
[Tue Oct 27 15:26:19 2026] NET: Registered protocol family 31
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI device and connection manager initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: L2CAP socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: SCO socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART driver ver 2.3
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol H4 registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Broadcom registered
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP filters: protocol multicast
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM TTY layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM ver 1.11
[Tue Oct 27 15:26:20 2026] NET: Registered protocol family 38
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): recovery complete
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:22 2026] fuse init (API version 7.26)
[Tue Oct 27 15:26:24 2026] usb 1-1.2: USB disconnect, device number 4
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.0: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.1: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.2: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.3: device disconnected
[Tue Oct 27 15:26:25 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:26 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:41:40 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:41:42 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:46:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:46:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:47:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:47:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:48:24 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:48:26 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:09:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 17:17:57 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:17:59 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:21:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:21:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:41:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:41:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:56:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:57:03 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:12:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:12:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:25 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:50 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 19:34:19 2026] Voltage normalised (0x00000000)
[Tue Oct 27 19:34:21 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:13:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:13:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:25:30 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 20:33:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:33:53 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:55 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:42:51 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:42:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:54:28 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:54:30 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:26:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:26:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:52:11 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:52:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:56:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:56:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:06:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:06:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:24:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:24:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:27:00 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:27:02 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:34:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 22:37:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:38:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:39:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:39:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:41:23 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:41:25 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:54:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:54:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:06:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 23:07:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:07:48 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:12:12 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:12:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:14:29 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:14:31 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:27:58 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:28:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:34:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:34:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:38:41 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:38:43 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:42:03 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:42:06 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:54:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:55:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:59:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:59:54 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:03:10 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:03:12 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:24:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 00:39:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:39:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:54:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:54:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:01:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:14:12 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:14:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:24:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:24:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:34:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:34:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:58:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:58:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:11:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:11:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:37:01 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:37:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:42:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:42:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:59:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:59:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:01:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:13:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:13:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:15:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:15:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:55:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:55:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:13:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:13:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:43:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:43:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:49:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:49:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:02:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:02:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:10:41 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:10:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:20:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:20:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:25:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:25:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:26:57 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:26:59 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:28:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:28:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:43:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:43:48 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:50:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:50:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:55:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:55:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:04:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:10:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:11:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:22:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:22:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:47:50 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:47:52 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:50:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:55:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:55:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:16:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:16:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:24:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:35:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:35:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:47:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:48:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:50:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:50:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:53:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:53:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:14:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:14:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:15:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:15:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:21:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:21:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:23:55 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:23:57 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:33:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:33:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:40:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:40:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:48:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 08:56:29 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:31 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:56:53 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:38:42 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:38:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:43:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:43:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:45:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 09:50:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:50:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:00:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:00:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:01:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:01:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:13:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:13:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:19:09 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:19:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:29:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:29:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:38:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:39:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:44:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:46:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:14:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:14:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:20:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:20:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:22:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:29:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:29:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:44:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:44:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:46:31 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 12:24:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:25:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 12:32:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 12:43:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:43:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 13:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:17:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 14:38:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 14:38:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 14:50:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 15:08:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 15:08:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:28:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:28:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:37:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:37:55 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:52:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:52:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:13:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:14:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:16:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:16:20 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:31:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:31:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:49:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:49:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:53:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:53:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:57:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:57:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:05:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:05:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:06:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:06:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:08:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:08:26 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:39:46 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 18:41:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:41:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:45:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:45:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:23:25 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:23:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:29:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:29:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:02:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 20:07:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:07:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:17:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:18:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:41:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:41:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:48:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:48:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:16:14 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:16:16 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:24:27 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:24:29 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:27:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:27:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:30:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:30:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:39:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:39:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:40:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:40:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:43:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:43:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:47:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:47:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:49:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:49:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:55:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:55:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:09:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:09:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:11:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:11:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:26:47 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:26:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:29:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:29:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:40:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:41:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:13:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 23:13:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:48:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:34:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:40:13 2026] Voltage normalised (0x00000000)
[Thu Oct 29 00:40:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:11:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:11:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:25:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:25:50 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:27:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:27:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:36:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:36:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:37:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 01:41:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:41:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:42:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:42:12 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:58:56 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:58:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:21:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:21:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:44:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:44:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:55:18 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:55:20 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:59:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:59:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:05:24 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:45 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:28:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:28:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:39:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:39:45 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:43:23 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:43:25 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:01:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:01:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:10:07 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 04:12:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:12:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:14:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:14:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:19:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:19:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:21:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:21:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:22:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:22:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:09:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:09:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:15:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:15:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:30:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:30:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:34:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:34:51 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:36:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 05:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:01:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:01:11 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:02:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:03:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:05:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:05:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:13:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:14:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:23:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:23:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:30:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:30:27 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:59:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:59:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 07:05:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 07:13:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 07:13:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:26:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:26:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:27 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:29 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:33:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:13 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:27:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:27:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:28:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:28:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:29:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:30:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:37:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:37:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:38:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:38:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:45:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:45:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:04:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:04:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:13:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:13:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:15:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:15:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:35:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:35:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:44:50 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:44:54 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:58:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:58:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 11:14:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:14:49 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:15:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:15:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:26:11 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:26:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:06:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:17 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:22:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:22:56 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:31:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:31:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:48:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:49:00 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 13:06:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:06:52 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:08:00 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:08:02 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:21 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:44 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:23:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:23:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:06:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:10:47 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:10:49 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:21:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:21:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:39:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 15:17:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 15:17:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:18:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:18:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:19:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:19:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:23:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 16:37:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:44:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:44:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:49:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:49:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:54:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 17:16:07 2026] cp210x ttyUSB1: failed to get comm status: -71
[Thu Oct 29 17:18:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:19:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:37:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:56:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:56:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:06:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:07:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:53:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:58:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:58:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:01:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 19:04:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:04:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:28:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:28:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:32:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:32:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:05:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:05:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:43:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:43:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:53:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 20:56:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:56:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 22:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 22:07:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 23:00:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:00:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:03:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:03:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:16:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:16:14 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:36:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:36:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:44:52 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:08:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:08:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:12:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:12:59 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:25:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:25:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:24 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:26 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:49:58 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:49:58 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:50:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:50:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:08:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:08:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:16:23 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:16:25 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 02:58:19 2026] Voltage normalised (0x00000000)
[Fri Oct 30 02:58:21 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:33:44 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:33:46 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:39:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:39:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:29:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:29:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:41:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:41:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:49:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:49:26 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:54:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:54:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:01:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:01:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:16:48 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 05:56:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:56:11 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:57:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:57:14 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:04:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:04:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:19:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 06:31:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:31:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:54:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:54:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:29:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:29:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:39:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:39:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:09:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:09:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:35 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:50:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:50:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:00:51 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:00:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:01:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:01:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:03:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:03:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:16 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:28:31 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:28:33 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:32:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:32:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:48:50 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:48:52 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:41:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:41:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:55:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:55:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:03:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:16:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:17:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:20:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:20:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:22:01 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:22:03 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:24:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:24:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:31:41 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:52:48 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:52:50 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:54:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:54:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 12:07:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:44:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 12:44:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 13:12:40 2026] Voltage normalised (0x00000000)
[Fri Oct 30 13:12:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:39:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:39:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:40:27 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:40:29 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:08:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:08:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:23:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:23:51 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:17:29 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:17:31 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:44:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:55:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:55:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:08:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:08:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:13:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:13:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 17:23:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:23:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:29:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:29:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:34:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:34:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 18:31:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 18:31:18 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:23:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:23:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:54:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:54:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 20:33:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 20:33:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:50:50 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:51:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:14:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 22:14:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 22:19:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:19:27 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:33:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:34:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:05:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:05:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:18:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:18:52 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:45:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:45:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:30 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:32 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:57:22 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:57:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:26:09 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:26:11 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:34:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:34:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:52:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 00:59:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:59:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 01:23:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 01:23:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:07:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:07:12 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:35:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:35:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:46:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:47:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:06:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:20:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:20:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:46:31 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:46:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:49:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:49:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:56:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:56:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:04:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:04:58 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:08:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:22 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:47:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:53:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:54:01 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:07:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:07:22 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:08:01 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:08:03 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:10:58 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:11:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:14:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:14:51 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:47:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:47:32 2026] Under-voltage detected! (0x00050005)

=================================================
=================================================

DateTime: 26-10-31 07:00:05

-------------------------------------------------

[Tue Oct 27 15:26:09 2026] Booting Linux on physical CPU 0x0
[Tue Oct 27 15:26:09 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Tue Oct 27 15:26:09 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Tue Oct 27 15:26:09 2026] CPU: div instructions available: patching division code
[Tue Oct 27 15:26:09 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Tue Oct 27 15:26:09 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Tue Oct 27 15:26:09 2026] Memory policy: Data cache writealloc
[Tue Oct 27 15:26:09 2026] cma: Reserved 8 MiB at 0x37800000
[Tue Oct 27 15:26:09 2026] On node 0 totalpages: 229376
[Tue Oct 27 15:26:09 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Tue Oct 27 15:26:09 2026]   Normal zone: 2016 pages used for memmap
[Tue Oct 27 15:26:09 2026]   Normal zone: 0 pages reserved
[Tue Oct 27 15:26:09 2026]   Normal zone: 229376 pages, LIFO batch:31
[Tue Oct 27 15:26:09 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Tue Oct 27 15:26:09 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Tue Oct 27 15:26:09 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Tue Oct 27 15:26:09 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Tue Oct 27 15:26:09 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Tue Oct 27 15:26:09 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Tue Oct 27 15:26:09 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Tue Oct 27 15:26:09 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Tue Oct 27 15:26:09 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Tue Oct 27 15:26:09 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Tue Oct 27 15:26:09 2026] ftrace: allocating 25298 entries in 75 pages
[Tue Oct 27 15:26:09 2026] Hierarchical RCU implementation.
[Tue Oct 27 15:26:09 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Tue Oct 27 15:26:09 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Tue Oct 27 15:26:09 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Tue Oct 27 15:26:09 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Tue Oct 27 15:26:09 2026] Switching to timer-based delay loop, resolution 52ns
[Tue Oct 27 15:26:09 2026] Console: colour dummy device 80x30
[Tue Oct 27 15:26:09 2026] console [tty1] enabled
[Tue Oct 27 15:26:09 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Tue Oct 27 15:26:09 2026] pid_max: default: 32768 minimum: 301
[Tue Oct 27 15:26:09 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Disabling memory control group subsystem
[Tue Oct 27 15:26:09 2026] CPU: Testing write buffer coherency: ok
[Tue Oct 27 15:26:09 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Tue Oct 27 15:26:09 2026] Setting up static identity map for 0x100000 - 0x10003c
[Tue Oct 27 15:26:09 2026] Hierarchical SRCU implementation.
[Tue Oct 27 15:26:09 2026] smp: Bringing up secondary CPUs ...
[Tue Oct 27 15:26:09 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Tue Oct 27 15:26:09 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Tue Oct 27 15:26:09 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Tue Oct 27 15:26:09 2026] smp: Brought up 1 node, 4 CPUs
[Tue Oct 27 15:26:09 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Tue Oct 27 15:26:09 2026] CPU: All CPU(s) started in HYP mode.
[Tue Oct 27 15:26:09 2026] CPU: Virtualization extensions available.
[Tue Oct 27 15:26:09 2026] devtmpfs: initialized
[Tue Oct 27 15:26:09 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Tue Oct 27 15:26:09 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Tue Oct 27 15:26:09 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Tue Oct 27 15:26:09 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] pinctrl core: initialized pinctrl subsystem
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 16
[Tue Oct 27 15:26:09 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Tue Oct 27 15:26:09 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Tue Oct 27 15:26:09 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Tue Oct 27 15:26:09 2026] Serial: AMBA PL011 UART driver
[Tue Oct 27 15:26:09 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Tue Oct 27 15:26:09 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Tue Oct 27 15:26:09 2026] SCSI subsystem initialized
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbfs
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver hub
[Tue Oct 27 15:26:09 2026] usbcore: registered new device driver usb
[Tue Oct 27 15:26:09 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Tue Oct 27 15:26:09 2026] clocksource: Switched to clocksource arch_sys_counter
[Tue Oct 27 15:26:09 2026] VFS: Disk quotas dquot_6.6.0
[Tue Oct 27 15:26:09 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Tue Oct 27 15:26:09 2026] FS-Cache: Loaded
[Tue Oct 27 15:26:09 2026] CacheFiles: Loaded
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 2
[Tue Oct 27 15:26:09 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Tue Oct 27 15:26:09 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Tue Oct 27 15:26:09 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 1
[Tue Oct 27 15:26:09 2026] RPC: Registered named UNIX socket transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered udp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Tue Oct 27 15:26:09 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Tue Oct 27 15:26:09 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Tue Oct 27 15:26:09 2026] FS-Cache: Netfs 'nfs' registered for caching
[Tue Oct 27 15:26:09 2026] NFS: Registering the id_resolver key type
[Tue Oct 27 15:26:09 2026] Key type id_resolver registered
[Tue Oct 27 15:26:09 2026] Key type id_legacy registered
[Tue Oct 27 15:26:09 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Tue Oct 27 15:26:09 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Tue Oct 27 15:26:09 2026] io scheduler noop registered
[Tue Oct 27 15:26:09 2026] io scheduler deadline registered (default)
[Tue Oct 27 15:26:09 2026] io scheduler cfq registered
[Tue Oct 27 15:26:09 2026] io scheduler mq-deadline registered
[Tue Oct 27 15:26:09 2026] io scheduler kyber registered
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA memory f7910000
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Tue Oct 27 15:26:09 2026] Console: switching to colour frame buffer device 90x30
[Tue Oct 27 15:26:09 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Tue Oct 27 15:26:09 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Tue Oct 27 15:26:09 2026] vc-sm: Videocore shared memory driver
[Tue Oct 27 15:26:09 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Tue Oct 27 15:26:09 2026] brd: module loaded
[Tue Oct 27 15:26:09 2026] loop: module loaded
[Tue Oct 27 15:26:09 2026] Loading iSCSI transport class v2.0-870.
[Tue Oct 27 15:26:09 2026] libphy: Fixed MDIO Bus: probed
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver lan78xx
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver smsc95xx
[Tue Oct 27 15:26:09 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Tue Oct 27 15:26:09 2026] Core Release: 2.80a
[Tue Oct 27 15:26:09 2026] Setting default values for core params
[Tue Oct 27 15:26:09 2026] Finished setting default values for core params
[Tue Oct 27 15:26:09 2026] Using Buffer DMA mode
[Tue Oct 27 15:26:09 2026] Periodic Transfer Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] Multiprocessor Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Tue Oct 27 15:26:09 2026] Dedicated Tx FIFOs mode
[Tue Oct 27 15:26:09 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Tue Oct 27 15:26:09 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: Microframe scheduler enabled
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Tue Oct 27 15:26:09 2026] Init: Port Power? op_state=1
[Tue Oct 27 15:26:09 2026] Init: Power Port (0)
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Oct 27 15:26:09 2026] usb usb1: Product: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Tue Oct 27 15:26:09 2026] usb usb1: SerialNumber: 3f980000.usb
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: USB hub found
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: 1 port detected
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: NAK holdoff enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ split-transaction FSM enabled
[Tue Oct 27 15:26:09 2026] Module dwc_common_port init
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usb-storage
[Tue Oct 27 15:26:09 2026] mousedev: PS/2 mouse device common for all mice
[Tue Oct 27 15:26:09 2026] IR NEC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC5(x/sz) protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC6 protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR JVC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sony protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR SANYO protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sharp protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR MCE Keyboard/mouse protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR XMP protocol handler initialized
[Tue Oct 27 15:26:09 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Tue Oct 27 15:26:09 2026] bcm2835-cpufreq: min=600000 max=1200000
[Tue Oct 27 15:26:09 2026] sdhci: Secure Digital Host Controller Interface driver
[Tue Oct 27 15:26:09 2026] sdhci: Copyright(c) Pierre Ossman
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Tue Oct 27 15:26:09 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Tue Oct 27 15:26:09 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbhid
[Tue Oct 27 15:26:09 2026] usbhid: USB HID core driver
[Tue Oct 27 15:26:09 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: start
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: end - returning 0
[Tue Oct 27 15:26:09 2026] Initializing XFRM netlink socket
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 17
[Tue Oct 27 15:26:09 2026] Key type dns_resolver registered
[Tue Oct 27 15:26:09 2026] Registering SWP/SWPB emulation handler
[Tue Oct 27 15:26:09 2026] registered taskstats version 1
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Tue Oct 27 15:26:09 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Tue Oct 27 15:26:09 2026] sdhost: log_buf @ b7907000 (f7907000)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Tue Oct 27 15:26:09 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Tue Oct 27 15:26:09 2026] of_cfs_init
[Tue Oct 27 15:26:09 2026] of_cfs_init: OK
[Tue Oct 27 15:26:09 2026] Waiting for root device /dev/mmcblk0p2...
[Tue Oct 27 15:26:09 2026] random: fast init done
[Tue Oct 27 15:26:09 2026] Indeed it is in host mode hprt0 = 00021501
[Tue Oct 27 15:26:09 2026] mmc1: new high speed SDIO card at address 0001
[Tue Oct 27 15:26:09 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Tue Oct 27 15:26:09 2026] mmc0: new high speed SDHC card at address aaaa
[Tue Oct 27 15:26:09 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Tue Oct 27 15:26:10 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue Oct 27 15:26:10 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Tue Oct 27 15:26:10 2026] Indeed it is in host mode hprt0 = 00001101
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): recovery complete
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:10 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Oct 27 15:26:10 2026] devtmpfs: mounted
[Tue Oct 27 15:26:10 2026] Freeing unused kernel memory: 1024K
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: USB hub found
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: 5 ports detected
[Tue Oct 27 15:26:10 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Tue Oct 27 15:26:10 2026] systemd[1]: System time before build time, advancing clock.
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] smsc95xx v1.0.6
[Tue Oct 27 15:26:10 2026] NET: Registered protocol family 10
[Tue Oct 27 15:26:10 2026] Segment Routing with IPv6
[Tue Oct 27 15:26:10 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Tue Oct 27 15:26:10 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Tue Oct 27 15:26:10 2026] systemd[1]: Detected architecture arm.
[Tue Oct 27 15:26:10 2026] systemd[1]: Set hostname to <TM06202302>.
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Tue Oct 27 15:26:10 2026] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:11 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on Journal Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Kernel Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Control Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Created slice System Slice.
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting POSIX Message Queue File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting RPC Pipe File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Starting Set the console keyboard layout...
[Tue Oct 27 15:26:11 2026] i2c /dev entries driver
[Tue Oct 27 15:26:12 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Tue Oct 27 15:26:12 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Tue Oct 27 15:26:12 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Tue Oct 27 15:26:13 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Tue Oct 27 15:26:13 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver brcmfmac
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial_generic
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for generic
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver cp210x
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for cp210x
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] systemd-journald[102]: Received request to flush runtime journal from PID 1
[Tue Oct 27 15:26:14 2026] uart-pl011 3f201000.serial: no DMA platform data
[Tue Oct 27 15:26:15 2026] random: crng init done
[Tue Oct 27 15:26:15 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Tue Oct 27 15:26:16 2026] brcmfmac: power management disabled
[Tue Oct 27 15:26:16 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Tue Oct 27 15:26:17 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:26:17 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Tue Oct 27 15:26:17 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Tue Oct 27 15:26:19 2026] Bluetooth: Core ver 2.22
[Tue Oct 27 15:26:19 2026] NET: Registered protocol family 31
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI device and connection manager initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: L2CAP socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: SCO socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART driver ver 2.3
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol H4 registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Broadcom registered
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP filters: protocol multicast
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM TTY layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM ver 1.11
[Tue Oct 27 15:26:20 2026] NET: Registered protocol family 38
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): recovery complete
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:22 2026] fuse init (API version 7.26)
[Tue Oct 27 15:26:24 2026] usb 1-1.2: USB disconnect, device number 4
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.0: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.1: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.2: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.3: device disconnected
[Tue Oct 27 15:26:25 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:26 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:41:40 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:41:42 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:46:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:46:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:47:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:47:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:48:24 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:48:26 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:09:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 17:17:57 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:17:59 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:21:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:21:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:41:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:41:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:56:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:57:03 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:12:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:12:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:25 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:50 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 19:34:19 2026] Voltage normalised (0x00000000)
[Tue Oct 27 19:34:21 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:13:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:13:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:25:30 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 20:33:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:33:53 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:55 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:42:51 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:42:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:54:28 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:54:30 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:26:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:26:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:52:11 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:52:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:56:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:56:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:06:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:06:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:24:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:24:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:27:00 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:27:02 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:34:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 22:37:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:38:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:39:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:39:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:41:23 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:41:25 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:54:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:54:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:06:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 23:07:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:07:48 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:12:12 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:12:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:14:29 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:14:31 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:27:58 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:28:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:34:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:34:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:38:41 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:38:43 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:42:03 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:42:06 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:54:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:55:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:59:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:59:54 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:03:10 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:03:12 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:24:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 00:39:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:39:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:54:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:54:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:01:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:14:12 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:14:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:24:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:24:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:34:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:34:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:58:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:58:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:11:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:11:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:37:01 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:37:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:42:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:42:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:59:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:59:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:01:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:13:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:13:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:15:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:15:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:55:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:55:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:13:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:13:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:43:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:43:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:49:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:49:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:02:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:02:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:10:41 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:10:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:20:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:20:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:25:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:25:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:26:57 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:26:59 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:28:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:28:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:43:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:43:48 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:50:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:50:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:55:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:55:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:04:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:10:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:11:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:22:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:22:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:47:50 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:47:52 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:50:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:55:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:55:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:16:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:16:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:24:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:35:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:35:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:47:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:48:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:50:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:50:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:53:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:53:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:14:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:14:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:15:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:15:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:21:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:21:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:23:55 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:23:57 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:33:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:33:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:40:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:40:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:48:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 08:56:29 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:31 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:56:53 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:38:42 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:38:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:43:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:43:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:45:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 09:50:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:50:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:00:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:00:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:01:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:01:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:13:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:13:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:19:09 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:19:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:29:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:29:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:38:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:39:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:44:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:46:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:14:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:14:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:20:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:20:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:22:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:29:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:29:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:44:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:44:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:46:31 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 12:24:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:25:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 12:32:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 12:43:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:43:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 13:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:17:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 14:38:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 14:38:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 14:50:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 15:08:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 15:08:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:28:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:28:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:37:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:37:55 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:52:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:52:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:13:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:14:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:16:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:16:20 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:31:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:31:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:49:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:49:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:53:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:53:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:57:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:57:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:05:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:05:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:06:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:06:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:08:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:08:26 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:39:46 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 18:41:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:41:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:45:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:45:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:23:25 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:23:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:29:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:29:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:02:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 20:07:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:07:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:17:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:18:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:41:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:41:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:48:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:48:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:16:14 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:16:16 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:24:27 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:24:29 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:27:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:27:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:30:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:30:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:39:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:39:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:40:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:40:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:43:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:43:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:47:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:47:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:49:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:49:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:55:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:55:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:09:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:09:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:11:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:11:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:26:47 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:26:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:29:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:29:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:40:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:41:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:13:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 23:13:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:48:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:34:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:40:13 2026] Voltage normalised (0x00000000)
[Thu Oct 29 00:40:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:11:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:11:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:25:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:25:50 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:27:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:27:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:36:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:36:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:37:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 01:41:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:41:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:42:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:42:12 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:58:56 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:58:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:21:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:21:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:44:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:44:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:55:18 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:55:20 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:59:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:59:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:05:24 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:45 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:28:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:28:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:39:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:39:45 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:43:23 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:43:25 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:01:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:01:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:10:07 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 04:12:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:12:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:14:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:14:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:19:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:19:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:21:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:21:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:22:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:22:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:09:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:09:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:15:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:15:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:30:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:30:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:34:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:34:51 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:36:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 05:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:01:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:01:11 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:02:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:03:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:05:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:05:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:13:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:14:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:23:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:23:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:30:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:30:27 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:59:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:59:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 07:05:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 07:13:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 07:13:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:26:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:26:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:27 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:29 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:33:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:13 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:27:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:27:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:28:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:28:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:29:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:30:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:37:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:37:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:38:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:38:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:45:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:45:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:04:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:04:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:13:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:13:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:15:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:15:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:35:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:35:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:44:50 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:44:54 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:58:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:58:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 11:14:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:14:49 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:15:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:15:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:26:11 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:26:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:06:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:17 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:22:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:22:56 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:31:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:31:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:48:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:49:00 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 13:06:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:06:52 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:08:00 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:08:02 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:21 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:44 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:23:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:23:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:06:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:10:47 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:10:49 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:21:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:21:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:39:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 15:17:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 15:17:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:18:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:18:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:19:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:19:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:23:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 16:37:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:44:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:44:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:49:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:49:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:54:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 17:16:07 2026] cp210x ttyUSB1: failed to get comm status: -71
[Thu Oct 29 17:18:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:19:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:37:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:56:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:56:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:06:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:07:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:53:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:58:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:58:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:01:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 19:04:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:04:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:28:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:28:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:32:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:32:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:05:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:05:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:43:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:43:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:53:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 20:56:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:56:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 22:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 22:07:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 23:00:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:00:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:03:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:03:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:16:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:16:14 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:36:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:36:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:44:52 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:08:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:08:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:12:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:12:59 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:25:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:25:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:24 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:26 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:49:58 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:49:58 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:50:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:50:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:08:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:08:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:16:23 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:16:25 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 02:58:19 2026] Voltage normalised (0x00000000)
[Fri Oct 30 02:58:21 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:33:44 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:33:46 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:39:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:39:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:29:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:29:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:41:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:41:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:49:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:49:26 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:54:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:54:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:01:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:01:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:16:48 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 05:56:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:56:11 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:57:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:57:14 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:04:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:04:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:19:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 06:31:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:31:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:54:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:54:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:29:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:29:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:39:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:39:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:09:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:09:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:35 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:50:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:50:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:00:51 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:00:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:01:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:01:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:03:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:03:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:16 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:28:31 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:28:33 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:32:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:32:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:48:50 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:48:52 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:41:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:41:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:55:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:55:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:03:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:16:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:17:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:20:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:20:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:22:01 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:22:03 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:24:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:24:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:31:41 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:52:48 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:52:50 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:54:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:54:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 12:07:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:44:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 12:44:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 13:12:40 2026] Voltage normalised (0x00000000)
[Fri Oct 30 13:12:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:39:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:39:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:40:27 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:40:29 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:08:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:08:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:23:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:23:51 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:17:29 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:17:31 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:44:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:55:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:55:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:08:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:08:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:13:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:13:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 17:23:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:23:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:29:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:29:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:34:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:34:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 18:31:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 18:31:18 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:23:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:23:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:54:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:54:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 20:33:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 20:33:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:50:50 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:51:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:14:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 22:14:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 22:19:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:19:27 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:33:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:34:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:05:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:05:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:18:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:18:52 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:45:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:45:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:30 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:32 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:57:22 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:57:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:26:09 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:26:11 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:34:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:34:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:52:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 00:59:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:59:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 01:23:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 01:23:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:07:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:07:12 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:35:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:35:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:46:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:47:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:06:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:20:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:20:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:46:31 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:46:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:49:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:49:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:56:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:56:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:04:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:04:58 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:08:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:22 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:47:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:53:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:54:01 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:07:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:07:22 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:08:01 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:08:03 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:10:58 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:11:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:14:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:14:51 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:47:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:47:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:00:45 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:00:47 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:18:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:18:53 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:19:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:20:04 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:23:40 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 06:36:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:36:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:55:18 2026] cp210x ttyUSB0: failed to get comm status: -71

=================================================
=================================================

DateTime: 26-10-31 08:00:05

-------------------------------------------------

[Tue Oct 27 15:26:09 2026] Booting Linux on physical CPU 0x0
[Tue Oct 27 15:26:09 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Tue Oct 27 15:26:09 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Tue Oct 27 15:26:09 2026] CPU: div instructions available: patching division code
[Tue Oct 27 15:26:09 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Tue Oct 27 15:26:09 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Tue Oct 27 15:26:09 2026] Memory policy: Data cache writealloc
[Tue Oct 27 15:26:09 2026] cma: Reserved 8 MiB at 0x37800000
[Tue Oct 27 15:26:09 2026] On node 0 totalpages: 229376
[Tue Oct 27 15:26:09 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Tue Oct 27 15:26:09 2026]   Normal zone: 2016 pages used for memmap
[Tue Oct 27 15:26:09 2026]   Normal zone: 0 pages reserved
[Tue Oct 27 15:26:09 2026]   Normal zone: 229376 pages, LIFO batch:31
[Tue Oct 27 15:26:09 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Tue Oct 27 15:26:09 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Tue Oct 27 15:26:09 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Tue Oct 27 15:26:09 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Tue Oct 27 15:26:09 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Tue Oct 27 15:26:09 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Tue Oct 27 15:26:09 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Tue Oct 27 15:26:09 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Tue Oct 27 15:26:09 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Tue Oct 27 15:26:09 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Tue Oct 27 15:26:09 2026] ftrace: allocating 25298 entries in 75 pages
[Tue Oct 27 15:26:09 2026] Hierarchical RCU implementation.
[Tue Oct 27 15:26:09 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Tue Oct 27 15:26:09 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Tue Oct 27 15:26:09 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Tue Oct 27 15:26:09 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Tue Oct 27 15:26:09 2026] Switching to timer-based delay loop, resolution 52ns
[Tue Oct 27 15:26:09 2026] Console: colour dummy device 80x30
[Tue Oct 27 15:26:09 2026] console [tty1] enabled
[Tue Oct 27 15:26:09 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Tue Oct 27 15:26:09 2026] pid_max: default: 32768 minimum: 301
[Tue Oct 27 15:26:09 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Disabling memory control group subsystem
[Tue Oct 27 15:26:09 2026] CPU: Testing write buffer coherency: ok
[Tue Oct 27 15:26:09 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Tue Oct 27 15:26:09 2026] Setting up static identity map for 0x100000 - 0x10003c
[Tue Oct 27 15:26:09 2026] Hierarchical SRCU implementation.
[Tue Oct 27 15:26:09 2026] smp: Bringing up secondary CPUs ...
[Tue Oct 27 15:26:09 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Tue Oct 27 15:26:09 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Tue Oct 27 15:26:09 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Tue Oct 27 15:26:09 2026] smp: Brought up 1 node, 4 CPUs
[Tue Oct 27 15:26:09 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Tue Oct 27 15:26:09 2026] CPU: All CPU(s) started in HYP mode.
[Tue Oct 27 15:26:09 2026] CPU: Virtualization extensions available.
[Tue Oct 27 15:26:09 2026] devtmpfs: initialized
[Tue Oct 27 15:26:09 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Tue Oct 27 15:26:09 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Tue Oct 27 15:26:09 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Tue Oct 27 15:26:09 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] pinctrl core: initialized pinctrl subsystem
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 16
[Tue Oct 27 15:26:09 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Tue Oct 27 15:26:09 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Tue Oct 27 15:26:09 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Tue Oct 27 15:26:09 2026] Serial: AMBA PL011 UART driver
[Tue Oct 27 15:26:09 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Tue Oct 27 15:26:09 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Tue Oct 27 15:26:09 2026] SCSI subsystem initialized
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbfs
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver hub
[Tue Oct 27 15:26:09 2026] usbcore: registered new device driver usb
[Tue Oct 27 15:26:09 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Tue Oct 27 15:26:09 2026] clocksource: Switched to clocksource arch_sys_counter
[Tue Oct 27 15:26:09 2026] VFS: Disk quotas dquot_6.6.0
[Tue Oct 27 15:26:09 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Tue Oct 27 15:26:09 2026] FS-Cache: Loaded
[Tue Oct 27 15:26:09 2026] CacheFiles: Loaded
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 2
[Tue Oct 27 15:26:09 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Tue Oct 27 15:26:09 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Tue Oct 27 15:26:09 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 1
[Tue Oct 27 15:26:09 2026] RPC: Registered named UNIX socket transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered udp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Tue Oct 27 15:26:09 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Tue Oct 27 15:26:09 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Tue Oct 27 15:26:09 2026] FS-Cache: Netfs 'nfs' registered for caching
[Tue Oct 27 15:26:09 2026] NFS: Registering the id_resolver key type
[Tue Oct 27 15:26:09 2026] Key type id_resolver registered
[Tue Oct 27 15:26:09 2026] Key type id_legacy registered
[Tue Oct 27 15:26:09 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Tue Oct 27 15:26:09 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Tue Oct 27 15:26:09 2026] io scheduler noop registered
[Tue Oct 27 15:26:09 2026] io scheduler deadline registered (default)
[Tue Oct 27 15:26:09 2026] io scheduler cfq registered
[Tue Oct 27 15:26:09 2026] io scheduler mq-deadline registered
[Tue Oct 27 15:26:09 2026] io scheduler kyber registered
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA memory f7910000
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Tue Oct 27 15:26:09 2026] Console: switching to colour frame buffer device 90x30
[Tue Oct 27 15:26:09 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Tue Oct 27 15:26:09 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Tue Oct 27 15:26:09 2026] vc-sm: Videocore shared memory driver
[Tue Oct 27 15:26:09 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Tue Oct 27 15:26:09 2026] brd: module loaded
[Tue Oct 27 15:26:09 2026] loop: module loaded
[Tue Oct 27 15:26:09 2026] Loading iSCSI transport class v2.0-870.
[Tue Oct 27 15:26:09 2026] libphy: Fixed MDIO Bus: probed
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver lan78xx
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver smsc95xx
[Tue Oct 27 15:26:09 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Tue Oct 27 15:26:09 2026] Core Release: 2.80a
[Tue Oct 27 15:26:09 2026] Setting default values for core params
[Tue Oct 27 15:26:09 2026] Finished setting default values for core params
[Tue Oct 27 15:26:09 2026] Using Buffer DMA mode
[Tue Oct 27 15:26:09 2026] Periodic Transfer Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] Multiprocessor Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Tue Oct 27 15:26:09 2026] Dedicated Tx FIFOs mode
[Tue Oct 27 15:26:09 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Tue Oct 27 15:26:09 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: Microframe scheduler enabled
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Tue Oct 27 15:26:09 2026] Init: Port Power? op_state=1
[Tue Oct 27 15:26:09 2026] Init: Power Port (0)
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Oct 27 15:26:09 2026] usb usb1: Product: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Tue Oct 27 15:26:09 2026] usb usb1: SerialNumber: 3f980000.usb
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: USB hub found
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: 1 port detected
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: NAK holdoff enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ split-transaction FSM enabled
[Tue Oct 27 15:26:09 2026] Module dwc_common_port init
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usb-storage
[Tue Oct 27 15:26:09 2026] mousedev: PS/2 mouse device common for all mice
[Tue Oct 27 15:26:09 2026] IR NEC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC5(x/sz) protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC6 protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR JVC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sony protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR SANYO protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sharp protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR MCE Keyboard/mouse protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR XMP protocol handler initialized
[Tue Oct 27 15:26:09 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Tue Oct 27 15:26:09 2026] bcm2835-cpufreq: min=600000 max=1200000
[Tue Oct 27 15:26:09 2026] sdhci: Secure Digital Host Controller Interface driver
[Tue Oct 27 15:26:09 2026] sdhci: Copyright(c) Pierre Ossman
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Tue Oct 27 15:26:09 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Tue Oct 27 15:26:09 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbhid
[Tue Oct 27 15:26:09 2026] usbhid: USB HID core driver
[Tue Oct 27 15:26:09 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: start
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: end - returning 0
[Tue Oct 27 15:26:09 2026] Initializing XFRM netlink socket
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 17
[Tue Oct 27 15:26:09 2026] Key type dns_resolver registered
[Tue Oct 27 15:26:09 2026] Registering SWP/SWPB emulation handler
[Tue Oct 27 15:26:09 2026] registered taskstats version 1
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Tue Oct 27 15:26:09 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Tue Oct 27 15:26:09 2026] sdhost: log_buf @ b7907000 (f7907000)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Tue Oct 27 15:26:09 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Tue Oct 27 15:26:09 2026] of_cfs_init
[Tue Oct 27 15:26:09 2026] of_cfs_init: OK
[Tue Oct 27 15:26:09 2026] Waiting for root device /dev/mmcblk0p2...
[Tue Oct 27 15:26:09 2026] random: fast init done
[Tue Oct 27 15:26:09 2026] Indeed it is in host mode hprt0 = 00021501
[Tue Oct 27 15:26:09 2026] mmc1: new high speed SDIO card at address 0001
[Tue Oct 27 15:26:09 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Tue Oct 27 15:26:09 2026] mmc0: new high speed SDHC card at address aaaa
[Tue Oct 27 15:26:09 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Tue Oct 27 15:26:10 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue Oct 27 15:26:10 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Tue Oct 27 15:26:10 2026] Indeed it is in host mode hprt0 = 00001101
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): recovery complete
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:10 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Oct 27 15:26:10 2026] devtmpfs: mounted
[Tue Oct 27 15:26:10 2026] Freeing unused kernel memory: 1024K
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: USB hub found
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: 5 ports detected
[Tue Oct 27 15:26:10 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Tue Oct 27 15:26:10 2026] systemd[1]: System time before build time, advancing clock.
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] smsc95xx v1.0.6
[Tue Oct 27 15:26:10 2026] NET: Registered protocol family 10
[Tue Oct 27 15:26:10 2026] Segment Routing with IPv6
[Tue Oct 27 15:26:10 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Tue Oct 27 15:26:10 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Tue Oct 27 15:26:10 2026] systemd[1]: Detected architecture arm.
[Tue Oct 27 15:26:10 2026] systemd[1]: Set hostname to <TM06202302>.
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Tue Oct 27 15:26:10 2026] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:11 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on Journal Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Kernel Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Control Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Created slice System Slice.
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting POSIX Message Queue File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting RPC Pipe File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Starting Set the console keyboard layout...
[Tue Oct 27 15:26:11 2026] i2c /dev entries driver
[Tue Oct 27 15:26:12 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Tue Oct 27 15:26:12 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Tue Oct 27 15:26:12 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Tue Oct 27 15:26:13 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Tue Oct 27 15:26:13 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver brcmfmac
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial_generic
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for generic
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver cp210x
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for cp210x
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] systemd-journald[102]: Received request to flush runtime journal from PID 1
[Tue Oct 27 15:26:14 2026] uart-pl011 3f201000.serial: no DMA platform data
[Tue Oct 27 15:26:15 2026] random: crng init done
[Tue Oct 27 15:26:15 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Tue Oct 27 15:26:16 2026] brcmfmac: power management disabled
[Tue Oct 27 15:26:16 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Tue Oct 27 15:26:17 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:26:17 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Tue Oct 27 15:26:17 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Tue Oct 27 15:26:19 2026] Bluetooth: Core ver 2.22
[Tue Oct 27 15:26:19 2026] NET: Registered protocol family 31
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI device and connection manager initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: L2CAP socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: SCO socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART driver ver 2.3
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol H4 registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Broadcom registered
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP filters: protocol multicast
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM TTY layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM ver 1.11
[Tue Oct 27 15:26:20 2026] NET: Registered protocol family 38
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): recovery complete
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:22 2026] fuse init (API version 7.26)
[Tue Oct 27 15:26:24 2026] usb 1-1.2: USB disconnect, device number 4
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.0: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.1: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.2: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.3: device disconnected
[Tue Oct 27 15:26:25 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:26 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:41:40 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:41:42 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:46:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:46:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:47:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:47:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:48:24 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:48:26 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:09:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 17:17:57 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:17:59 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:21:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:21:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:41:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:41:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:56:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:57:03 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:12:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:12:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:25 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:50 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 19:34:19 2026] Voltage normalised (0x00000000)
[Tue Oct 27 19:34:21 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:13:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:13:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:25:30 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 20:33:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:33:53 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:55 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:42:51 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:42:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:54:28 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:54:30 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:26:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:26:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:52:11 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:52:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:56:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:56:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:06:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:06:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:24:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:24:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:27:00 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:27:02 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:34:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 22:37:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:38:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:39:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:39:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:41:23 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:41:25 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:54:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:54:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:06:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 23:07:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:07:48 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:12:12 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:12:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:14:29 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:14:31 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:27:58 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:28:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:34:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:34:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:38:41 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:38:43 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:42:03 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:42:06 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:54:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:55:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:59:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:59:54 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:03:10 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:03:12 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:24:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 00:39:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:39:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:54:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:54:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:01:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:14:12 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:14:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:24:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:24:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:34:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:34:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:58:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:58:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:11:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:11:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:37:01 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:37:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:42:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:42:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:59:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:59:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:01:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:13:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:13:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:15:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:15:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:55:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:55:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:13:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:13:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:43:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:43:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:49:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:49:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:02:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:02:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:10:41 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:10:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:20:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:20:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:25:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:25:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:26:57 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:26:59 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:28:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:28:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:43:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:43:48 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:50:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:50:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:55:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:55:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:04:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:10:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:11:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:22:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:22:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:47:50 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:47:52 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:50:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:55:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:55:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:16:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:16:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:24:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:35:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:35:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:47:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:48:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:50:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:50:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:53:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:53:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:14:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:14:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:15:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:15:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:21:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:21:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:23:55 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:23:57 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:33:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:33:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:40:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:40:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:48:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 08:56:29 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:31 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:56:53 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:38:42 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:38:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:43:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:43:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:45:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 09:50:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:50:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:00:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:00:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:01:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:01:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:13:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:13:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:19:09 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:19:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:29:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:29:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:38:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:39:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:44:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:46:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:14:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:14:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:20:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:20:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:22:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:29:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:29:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:44:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:44:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:46:31 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 12:24:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:25:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 12:32:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 12:43:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:43:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 13:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:17:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 14:38:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 14:38:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 14:50:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 15:08:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 15:08:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:28:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:28:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:37:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:37:55 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:52:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:52:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:13:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:14:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:16:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:16:20 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:31:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:31:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:49:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:49:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:53:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:53:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:57:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:57:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:05:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:05:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:06:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:06:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:08:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:08:26 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:39:46 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 18:41:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:41:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:45:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:45:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:23:25 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:23:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:29:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:29:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:02:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 20:07:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:07:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:17:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:18:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:41:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:41:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:48:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:48:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:16:14 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:16:16 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:24:27 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:24:29 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:27:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:27:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:30:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:30:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:39:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:39:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:40:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:40:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:43:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:43:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:47:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:47:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:49:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:49:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:55:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:55:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:09:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:09:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:11:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:11:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:26:47 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:26:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:29:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:29:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:40:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:41:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:13:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 23:13:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:48:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:34:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:40:13 2026] Voltage normalised (0x00000000)
[Thu Oct 29 00:40:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:11:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:11:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:25:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:25:50 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:27:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:27:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:36:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:36:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:37:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 01:41:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:41:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:42:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:42:12 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:58:56 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:58:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:21:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:21:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:44:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:44:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:55:18 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:55:20 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:59:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:59:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:05:24 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:45 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:28:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:28:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:39:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:39:45 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:43:23 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:43:25 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:01:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:01:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:10:07 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 04:12:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:12:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:14:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:14:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:19:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:19:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:21:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:21:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:22:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:22:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:09:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:09:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:15:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:15:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:30:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:30:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:34:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:34:51 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:36:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 05:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:01:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:01:11 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:02:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:03:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:05:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:05:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:13:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:14:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:23:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:23:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:30:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:30:27 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:59:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:59:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 07:05:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 07:13:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 07:13:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:26:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:26:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:27 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:29 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:33:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:13 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:27:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:27:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:28:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:28:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:29:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:30:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:37:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:37:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:38:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:38:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:45:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:45:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:04:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:04:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:13:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:13:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:15:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:15:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:35:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:35:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:44:50 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:44:54 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:58:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:58:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 11:14:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:14:49 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:15:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:15:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:26:11 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:26:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:06:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:17 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:22:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:22:56 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:31:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:31:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:48:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:49:00 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 13:06:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:06:52 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:08:00 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:08:02 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:21 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:44 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:23:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:23:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:06:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:10:47 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:10:49 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:21:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:21:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:39:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 15:17:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 15:17:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:18:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:18:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:19:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:19:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:23:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 16:37:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:44:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:44:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:49:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:49:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:54:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 17:16:07 2026] cp210x ttyUSB1: failed to get comm status: -71
[Thu Oct 29 17:18:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:19:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:37:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:56:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:56:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:06:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:07:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:53:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:58:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:58:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:01:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 19:04:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:04:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:28:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:28:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:32:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:32:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:05:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:05:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:43:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:43:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:53:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 20:56:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:56:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 22:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 22:07:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 23:00:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:00:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:03:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:03:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:16:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:16:14 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:36:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:36:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:44:52 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:08:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:08:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:12:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:12:59 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:25:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:25:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:24 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:26 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:49:58 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:49:58 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:50:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:50:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:08:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:08:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:16:23 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:16:25 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 02:58:19 2026] Voltage normalised (0x00000000)
[Fri Oct 30 02:58:21 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:33:44 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:33:46 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:39:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:39:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:29:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:29:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:41:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:41:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:49:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:49:26 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:54:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:54:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:01:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:01:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:16:48 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 05:56:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:56:11 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:57:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:57:14 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:04:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:04:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:19:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 06:31:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:31:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:54:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:54:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:29:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:29:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:39:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:39:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:09:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:09:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:35 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:50:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:50:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:00:51 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:00:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:01:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:01:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:03:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:03:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:16 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:28:31 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:28:33 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:32:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:32:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:48:50 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:48:52 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:41:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:41:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:55:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:55:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:03:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:16:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:17:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:20:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:20:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:22:01 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:22:03 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:24:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:24:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:31:41 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:52:48 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:52:50 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:54:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:54:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 12:07:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:44:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 12:44:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 13:12:40 2026] Voltage normalised (0x00000000)
[Fri Oct 30 13:12:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:39:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:39:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:40:27 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:40:29 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:08:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:08:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:23:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:23:51 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:17:29 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:17:31 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:44:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:55:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:55:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:08:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:08:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:13:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:13:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 17:23:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:23:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:29:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:29:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:34:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:34:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 18:31:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 18:31:18 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:23:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:23:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:54:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:54:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 20:33:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 20:33:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:50:50 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:51:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:14:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 22:14:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 22:19:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:19:27 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:33:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:34:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:05:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:05:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:18:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:18:52 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:45:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:45:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:30 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:32 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:57:22 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:57:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:26:09 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:26:11 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:34:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:34:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:52:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 00:59:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:59:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 01:23:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 01:23:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:07:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:07:12 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:35:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:35:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:46:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:47:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:06:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:20:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:20:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:46:31 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:46:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:49:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:49:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:56:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:56:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:04:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:04:58 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:08:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:22 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:47:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:53:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:54:01 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:07:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:07:22 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:08:01 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:08:03 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:10:58 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:11:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:14:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:14:51 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:47:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:47:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:00:45 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:00:47 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:18:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:18:53 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:19:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:20:04 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:23:40 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 06:36:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:36:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:55:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 07:29:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 07:29:59 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 07:56:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 07:56:18 2026] Under-voltage detected! (0x00050005)

=================================================
=================================================

DateTime: 26-10-31 09:00:05

-------------------------------------------------

[Tue Oct 27 15:26:09 2026] Booting Linux on physical CPU 0x0
[Tue Oct 27 15:26:09 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Tue Oct 27 15:26:09 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Tue Oct 27 15:26:09 2026] CPU: div instructions available: patching division code
[Tue Oct 27 15:26:09 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Tue Oct 27 15:26:09 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Tue Oct 27 15:26:09 2026] Memory policy: Data cache writealloc
[Tue Oct 27 15:26:09 2026] cma: Reserved 8 MiB at 0x37800000
[Tue Oct 27 15:26:09 2026] On node 0 totalpages: 229376
[Tue Oct 27 15:26:09 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Tue Oct 27 15:26:09 2026]   Normal zone: 2016 pages used for memmap
[Tue Oct 27 15:26:09 2026]   Normal zone: 0 pages reserved
[Tue Oct 27 15:26:09 2026]   Normal zone: 229376 pages, LIFO batch:31
[Tue Oct 27 15:26:09 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Tue Oct 27 15:26:09 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Tue Oct 27 15:26:09 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Tue Oct 27 15:26:09 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Tue Oct 27 15:26:09 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Tue Oct 27 15:26:09 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Tue Oct 27 15:26:09 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Tue Oct 27 15:26:09 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Tue Oct 27 15:26:09 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Tue Oct 27 15:26:09 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Tue Oct 27 15:26:09 2026] ftrace: allocating 25298 entries in 75 pages
[Tue Oct 27 15:26:09 2026] Hierarchical RCU implementation.
[Tue Oct 27 15:26:09 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Tue Oct 27 15:26:09 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Tue Oct 27 15:26:09 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Tue Oct 27 15:26:09 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Tue Oct 27 15:26:09 2026] Switching to timer-based delay loop, resolution 52ns
[Tue Oct 27 15:26:09 2026] Console: colour dummy device 80x30
[Tue Oct 27 15:26:09 2026] console [tty1] enabled
[Tue Oct 27 15:26:09 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Tue Oct 27 15:26:09 2026] pid_max: default: 32768 minimum: 301
[Tue Oct 27 15:26:09 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Disabling memory control group subsystem
[Tue Oct 27 15:26:09 2026] CPU: Testing write buffer coherency: ok
[Tue Oct 27 15:26:09 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Tue Oct 27 15:26:09 2026] Setting up static identity map for 0x100000 - 0x10003c
[Tue Oct 27 15:26:09 2026] Hierarchical SRCU implementation.
[Tue Oct 27 15:26:09 2026] smp: Bringing up secondary CPUs ...
[Tue Oct 27 15:26:09 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Tue Oct 27 15:26:09 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Tue Oct 27 15:26:09 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Tue Oct 27 15:26:09 2026] smp: Brought up 1 node, 4 CPUs
[Tue Oct 27 15:26:09 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Tue Oct 27 15:26:09 2026] CPU: All CPU(s) started in HYP mode.
[Tue Oct 27 15:26:09 2026] CPU: Virtualization extensions available.
[Tue Oct 27 15:26:09 2026] devtmpfs: initialized
[Tue Oct 27 15:26:09 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Tue Oct 27 15:26:09 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Tue Oct 27 15:26:09 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Tue Oct 27 15:26:09 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] pinctrl core: initialized pinctrl subsystem
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 16
[Tue Oct 27 15:26:09 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Tue Oct 27 15:26:09 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Tue Oct 27 15:26:09 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Tue Oct 27 15:26:09 2026] Serial: AMBA PL011 UART driver
[Tue Oct 27 15:26:09 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Tue Oct 27 15:26:09 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Tue Oct 27 15:26:09 2026] SCSI subsystem initialized
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbfs
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver hub
[Tue Oct 27 15:26:09 2026] usbcore: registered new device driver usb
[Tue Oct 27 15:26:09 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Tue Oct 27 15:26:09 2026] clocksource: Switched to clocksource arch_sys_counter
[Tue Oct 27 15:26:09 2026] VFS: Disk quotas dquot_6.6.0
[Tue Oct 27 15:26:09 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Tue Oct 27 15:26:09 2026] FS-Cache: Loaded
[Tue Oct 27 15:26:09 2026] CacheFiles: Loaded
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 2
[Tue Oct 27 15:26:09 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Tue Oct 27 15:26:09 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Tue Oct 27 15:26:09 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 1
[Tue Oct 27 15:26:09 2026] RPC: Registered named UNIX socket transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered udp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Tue Oct 27 15:26:09 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Tue Oct 27 15:26:09 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Tue Oct 27 15:26:09 2026] FS-Cache: Netfs 'nfs' registered for caching
[Tue Oct 27 15:26:09 2026] NFS: Registering the id_resolver key type
[Tue Oct 27 15:26:09 2026] Key type id_resolver registered
[Tue Oct 27 15:26:09 2026] Key type id_legacy registered
[Tue Oct 27 15:26:09 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Tue Oct 27 15:26:09 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Tue Oct 27 15:26:09 2026] io scheduler noop registered
[Tue Oct 27 15:26:09 2026] io scheduler deadline registered (default)
[Tue Oct 27 15:26:09 2026] io scheduler cfq registered
[Tue Oct 27 15:26:09 2026] io scheduler mq-deadline registered
[Tue Oct 27 15:26:09 2026] io scheduler kyber registered
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA memory f7910000
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Tue Oct 27 15:26:09 2026] Console: switching to colour frame buffer device 90x30
[Tue Oct 27 15:26:09 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Tue Oct 27 15:26:09 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Tue Oct 27 15:26:09 2026] vc-sm: Videocore shared memory driver
[Tue Oct 27 15:26:09 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Tue Oct 27 15:26:09 2026] brd: module loaded
[Tue Oct 27 15:26:09 2026] loop: module loaded
[Tue Oct 27 15:26:09 2026] Loading iSCSI transport class v2.0-870.
[Tue Oct 27 15:26:09 2026] libphy: Fixed MDIO Bus: probed
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver lan78xx
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver smsc95xx
[Tue Oct 27 15:26:09 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Tue Oct 27 15:26:09 2026] Core Release: 2.80a
[Tue Oct 27 15:26:09 2026] Setting default values for core params
[Tue Oct 27 15:26:09 2026] Finished setting default values for core params
[Tue Oct 27 15:26:09 2026] Using Buffer DMA mode
[Tue Oct 27 15:26:09 2026] Periodic Transfer Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] Multiprocessor Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Tue Oct 27 15:26:09 2026] Dedicated Tx FIFOs mode
[Tue Oct 27 15:26:09 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Tue Oct 27 15:26:09 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: Microframe scheduler enabled
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Tue Oct 27 15:26:09 2026] Init: Port Power? op_state=1
[Tue Oct 27 15:26:09 2026] Init: Power Port (0)
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Oct 27 15:26:09 2026] usb usb1: Product: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Tue Oct 27 15:26:09 2026] usb usb1: SerialNumber: 3f980000.usb
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: USB hub found
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: 1 port detected
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: NAK holdoff enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ split-transaction FSM enabled
[Tue Oct 27 15:26:09 2026] Module dwc_common_port init
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usb-storage
[Tue Oct 27 15:26:09 2026] mousedev: PS/2 mouse device common for all mice
[Tue Oct 27 15:26:09 2026] IR NEC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC5(x/sz) protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC6 protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR JVC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sony protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR SANYO protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sharp protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR MCE Keyboard/mouse protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR XMP protocol handler initialized
[Tue Oct 27 15:26:09 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Tue Oct 27 15:26:09 2026] bcm2835-cpufreq: min=600000 max=1200000
[Tue Oct 27 15:26:09 2026] sdhci: Secure Digital Host Controller Interface driver
[Tue Oct 27 15:26:09 2026] sdhci: Copyright(c) Pierre Ossman
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Tue Oct 27 15:26:09 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Tue Oct 27 15:26:09 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbhid
[Tue Oct 27 15:26:09 2026] usbhid: USB HID core driver
[Tue Oct 27 15:26:09 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: start
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: end - returning 0
[Tue Oct 27 15:26:09 2026] Initializing XFRM netlink socket
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 17
[Tue Oct 27 15:26:09 2026] Key type dns_resolver registered
[Tue Oct 27 15:26:09 2026] Registering SWP/SWPB emulation handler
[Tue Oct 27 15:26:09 2026] registered taskstats version 1
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Tue Oct 27 15:26:09 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Tue Oct 27 15:26:09 2026] sdhost: log_buf @ b7907000 (f7907000)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Tue Oct 27 15:26:09 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Tue Oct 27 15:26:09 2026] of_cfs_init
[Tue Oct 27 15:26:09 2026] of_cfs_init: OK
[Tue Oct 27 15:26:09 2026] Waiting for root device /dev/mmcblk0p2...
[Tue Oct 27 15:26:09 2026] random: fast init done
[Tue Oct 27 15:26:09 2026] Indeed it is in host mode hprt0 = 00021501
[Tue Oct 27 15:26:09 2026] mmc1: new high speed SDIO card at address 0001
[Tue Oct 27 15:26:09 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Tue Oct 27 15:26:09 2026] mmc0: new high speed SDHC card at address aaaa
[Tue Oct 27 15:26:09 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Tue Oct 27 15:26:10 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue Oct 27 15:26:10 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Tue Oct 27 15:26:10 2026] Indeed it is in host mode hprt0 = 00001101
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): recovery complete
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:10 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Oct 27 15:26:10 2026] devtmpfs: mounted
[Tue Oct 27 15:26:10 2026] Freeing unused kernel memory: 1024K
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: USB hub found
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: 5 ports detected
[Tue Oct 27 15:26:10 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Tue Oct 27 15:26:10 2026] systemd[1]: System time before build time, advancing clock.
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] smsc95xx v1.0.6
[Tue Oct 27 15:26:10 2026] NET: Registered protocol family 10
[Tue Oct 27 15:26:10 2026] Segment Routing with IPv6
[Tue Oct 27 15:26:10 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Tue Oct 27 15:26:10 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Tue Oct 27 15:26:10 2026] systemd[1]: Detected architecture arm.
[Tue Oct 27 15:26:10 2026] systemd[1]: Set hostname to <TM06202302>.
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Tue Oct 27 15:26:10 2026] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:11 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on Journal Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Kernel Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Control Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Created slice System Slice.
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting POSIX Message Queue File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting RPC Pipe File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Starting Set the console keyboard layout...
[Tue Oct 27 15:26:11 2026] i2c /dev entries driver
[Tue Oct 27 15:26:12 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Tue Oct 27 15:26:12 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Tue Oct 27 15:26:12 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Tue Oct 27 15:26:13 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Tue Oct 27 15:26:13 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver brcmfmac
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial_generic
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for generic
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver cp210x
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for cp210x
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] systemd-journald[102]: Received request to flush runtime journal from PID 1
[Tue Oct 27 15:26:14 2026] uart-pl011 3f201000.serial: no DMA platform data
[Tue Oct 27 15:26:15 2026] random: crng init done
[Tue Oct 27 15:26:15 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Tue Oct 27 15:26:16 2026] brcmfmac: power management disabled
[Tue Oct 27 15:26:16 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Tue Oct 27 15:26:17 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:26:17 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Tue Oct 27 15:26:17 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Tue Oct 27 15:26:19 2026] Bluetooth: Core ver 2.22
[Tue Oct 27 15:26:19 2026] NET: Registered protocol family 31
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI device and connection manager initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: L2CAP socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: SCO socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART driver ver 2.3
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol H4 registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Broadcom registered
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP filters: protocol multicast
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM TTY layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM ver 1.11
[Tue Oct 27 15:26:20 2026] NET: Registered protocol family 38
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): recovery complete
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:22 2026] fuse init (API version 7.26)
[Tue Oct 27 15:26:24 2026] usb 1-1.2: USB disconnect, device number 4
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.0: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.1: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.2: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.3: device disconnected
[Tue Oct 27 15:26:25 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:26 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:41:40 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:41:42 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:46:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:46:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:47:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:47:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:48:24 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:48:26 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:09:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 17:17:57 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:17:59 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:21:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:21:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:41:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:41:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:56:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:57:03 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:12:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:12:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:25 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:50 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 19:34:19 2026] Voltage normalised (0x00000000)
[Tue Oct 27 19:34:21 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:13:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:13:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:25:30 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 20:33:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:33:53 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:55 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:42:51 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:42:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:54:28 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:54:30 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:26:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:26:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:52:11 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:52:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:56:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:56:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:06:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:06:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:24:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:24:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:27:00 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:27:02 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:34:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 22:37:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:38:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:39:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:39:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:41:23 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:41:25 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:54:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:54:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:06:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 23:07:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:07:48 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:12:12 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:12:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:14:29 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:14:31 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:27:58 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:28:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:34:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:34:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:38:41 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:38:43 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:42:03 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:42:06 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:54:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:55:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:59:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:59:54 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:03:10 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:03:12 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:24:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 00:39:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:39:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:54:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:54:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:01:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:14:12 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:14:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:24:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:24:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:34:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:34:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:58:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:58:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:11:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:11:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:37:01 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:37:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:42:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:42:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:59:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:59:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:01:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:13:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:13:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:15:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:15:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:55:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:55:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:13:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:13:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:43:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:43:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:49:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:49:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:02:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:02:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:10:41 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:10:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:20:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:20:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:25:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:25:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:26:57 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:26:59 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:28:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:28:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:43:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:43:48 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:50:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:50:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:55:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:55:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:04:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:10:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:11:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:22:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:22:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:47:50 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:47:52 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:50:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:55:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:55:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:16:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:16:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:24:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:35:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:35:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:47:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:48:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:50:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:50:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:53:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:53:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:14:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:14:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:15:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:15:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:21:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:21:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:23:55 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:23:57 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:33:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:33:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:40:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:40:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:48:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 08:56:29 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:31 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:56:53 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:38:42 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:38:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:43:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:43:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:45:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 09:50:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:50:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:00:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:00:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:01:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:01:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:13:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:13:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:19:09 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:19:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:29:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:29:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:38:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:39:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:44:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:46:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:14:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:14:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:20:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:20:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:22:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:29:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:29:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:44:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:44:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:46:31 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 12:24:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:25:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 12:32:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 12:43:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:43:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 13:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:17:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 14:38:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 14:38:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 14:50:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 15:08:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 15:08:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:28:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:28:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:37:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:37:55 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:52:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:52:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:13:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:14:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:16:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:16:20 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:31:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:31:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:49:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:49:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:53:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:53:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:57:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:57:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:05:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:05:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:06:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:06:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:08:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:08:26 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:39:46 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 18:41:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:41:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:45:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:45:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:23:25 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:23:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:29:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:29:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:02:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 20:07:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:07:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:17:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:18:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:41:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:41:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:48:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:48:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:16:14 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:16:16 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:24:27 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:24:29 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:27:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:27:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:30:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:30:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:39:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:39:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:40:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:40:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:43:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:43:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:47:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:47:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:49:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:49:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:55:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:55:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:09:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:09:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:11:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:11:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:26:47 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:26:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:29:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:29:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:40:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:41:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:13:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 23:13:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:48:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:34:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:40:13 2026] Voltage normalised (0x00000000)
[Thu Oct 29 00:40:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:11:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:11:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:25:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:25:50 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:27:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:27:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:36:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:36:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:37:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 01:41:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:41:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:42:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:42:12 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:58:56 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:58:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:21:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:21:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:44:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:44:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:55:18 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:55:20 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:59:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:59:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:05:24 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:45 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:28:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:28:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:39:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:39:45 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:43:23 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:43:25 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:01:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:01:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:10:07 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 04:12:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:12:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:14:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:14:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:19:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:19:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:21:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:21:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:22:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:22:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:09:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:09:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:15:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:15:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:30:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:30:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:34:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:34:51 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:36:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 05:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:01:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:01:11 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:02:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:03:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:05:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:05:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:13:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:14:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:23:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:23:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:30:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:30:27 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:59:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:59:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 07:05:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 07:13:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 07:13:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:26:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:26:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:27 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:29 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:33:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:13 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:27:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:27:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:28:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:28:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:29:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:30:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:37:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:37:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:38:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:38:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:45:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:45:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:04:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:04:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:13:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:13:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:15:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:15:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:35:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:35:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:44:50 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:44:54 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:58:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:58:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 11:14:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:14:49 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:15:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:15:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:26:11 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:26:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:06:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:17 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:22:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:22:56 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:31:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:31:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:48:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:49:00 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 13:06:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:06:52 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:08:00 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:08:02 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:21 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:44 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:23:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:23:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:06:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:10:47 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:10:49 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:21:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:21:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:39:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 15:17:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 15:17:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:18:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:18:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:19:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:19:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:23:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 16:37:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:44:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:44:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:49:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:49:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:54:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 17:16:07 2026] cp210x ttyUSB1: failed to get comm status: -71
[Thu Oct 29 17:18:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:19:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:37:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:56:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:56:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:06:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:07:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:53:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:58:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:58:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:01:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 19:04:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:04:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:28:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:28:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:32:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:32:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:05:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:05:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:43:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:43:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:53:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 20:56:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:56:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 22:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 22:07:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 23:00:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:00:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:03:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:03:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:16:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:16:14 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:36:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:36:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:44:52 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:08:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:08:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:12:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:12:59 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:25:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:25:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:24 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:26 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:49:58 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:49:58 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:50:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:50:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:08:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:08:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:16:23 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:16:25 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 02:58:19 2026] Voltage normalised (0x00000000)
[Fri Oct 30 02:58:21 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:33:44 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:33:46 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:39:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:39:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:29:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:29:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:41:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:41:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:49:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:49:26 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:54:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:54:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:01:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:01:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:16:48 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 05:56:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:56:11 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:57:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:57:14 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:04:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:04:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:19:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 06:31:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:31:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:54:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:54:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:29:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:29:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:39:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:39:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:09:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:09:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:35 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:50:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:50:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:00:51 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:00:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:01:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:01:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:03:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:03:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:16 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:28:31 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:28:33 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:32:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:32:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:48:50 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:48:52 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:41:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:41:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:55:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:55:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:03:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:16:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:17:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:20:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:20:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:22:01 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:22:03 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:24:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:24:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:31:41 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:52:48 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:52:50 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:54:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:54:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 12:07:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:44:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 12:44:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 13:12:40 2026] Voltage normalised (0x00000000)
[Fri Oct 30 13:12:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:39:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:39:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:40:27 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:40:29 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:08:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:08:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:23:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:23:51 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:17:29 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:17:31 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:44:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:55:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:55:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:08:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:08:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:13:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:13:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 17:23:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:23:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:29:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:29:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:34:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:34:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 18:31:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 18:31:18 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:23:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:23:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:54:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:54:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 20:33:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 20:33:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:50:50 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:51:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:14:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 22:14:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 22:19:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:19:27 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:33:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:34:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:05:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:05:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:18:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:18:52 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:45:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:45:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:30 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:32 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:57:22 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:57:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:26:09 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:26:11 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:34:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:34:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:52:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 00:59:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:59:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 01:23:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 01:23:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:07:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:07:12 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:35:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:35:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:46:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:47:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:06:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:20:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:20:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:46:31 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:46:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:49:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:49:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:56:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:56:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:04:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:04:58 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:08:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:22 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:47:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:53:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:54:01 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:07:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:07:22 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:08:01 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:08:03 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:10:58 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:11:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:14:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:14:51 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:47:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:47:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:00:45 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:00:47 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:18:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:18:53 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:19:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:20:04 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:23:40 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 06:36:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:36:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:55:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 07:29:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 07:29:59 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 07:56:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 07:56:18 2026] Under-voltage detected! (0x00050005)

=================================================
=================================================

DateTime: 26-10-31 10:00:05

-------------------------------------------------

[Tue Oct 27 15:26:09 2026] Booting Linux on physical CPU 0x0
[Tue Oct 27 15:26:09 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Tue Oct 27 15:26:09 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Tue Oct 27 15:26:09 2026] CPU: div instructions available: patching division code
[Tue Oct 27 15:26:09 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Tue Oct 27 15:26:09 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Tue Oct 27 15:26:09 2026] Memory policy: Data cache writealloc
[Tue Oct 27 15:26:09 2026] cma: Reserved 8 MiB at 0x37800000
[Tue Oct 27 15:26:09 2026] On node 0 totalpages: 229376
[Tue Oct 27 15:26:09 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Tue Oct 27 15:26:09 2026]   Normal zone: 2016 pages used for memmap
[Tue Oct 27 15:26:09 2026]   Normal zone: 0 pages reserved
[Tue Oct 27 15:26:09 2026]   Normal zone: 229376 pages, LIFO batch:31
[Tue Oct 27 15:26:09 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Tue Oct 27 15:26:09 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Tue Oct 27 15:26:09 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Tue Oct 27 15:26:09 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Tue Oct 27 15:26:09 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Tue Oct 27 15:26:09 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Tue Oct 27 15:26:09 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Tue Oct 27 15:26:09 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Tue Oct 27 15:26:09 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Tue Oct 27 15:26:09 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Tue Oct 27 15:26:09 2026] ftrace: allocating 25298 entries in 75 pages
[Tue Oct 27 15:26:09 2026] Hierarchical RCU implementation.
[Tue Oct 27 15:26:09 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Tue Oct 27 15:26:09 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Tue Oct 27 15:26:09 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Tue Oct 27 15:26:09 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Tue Oct 27 15:26:09 2026] Switching to timer-based delay loop, resolution 52ns
[Tue Oct 27 15:26:09 2026] Console: colour dummy device 80x30
[Tue Oct 27 15:26:09 2026] console [tty1] enabled
[Tue Oct 27 15:26:09 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Tue Oct 27 15:26:09 2026] pid_max: default: 32768 minimum: 301
[Tue Oct 27 15:26:09 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Disabling memory control group subsystem
[Tue Oct 27 15:26:09 2026] CPU: Testing write buffer coherency: ok
[Tue Oct 27 15:26:09 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Tue Oct 27 15:26:09 2026] Setting up static identity map for 0x100000 - 0x10003c
[Tue Oct 27 15:26:09 2026] Hierarchical SRCU implementation.
[Tue Oct 27 15:26:09 2026] smp: Bringing up secondary CPUs ...
[Tue Oct 27 15:26:09 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Tue Oct 27 15:26:09 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Tue Oct 27 15:26:09 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Tue Oct 27 15:26:09 2026] smp: Brought up 1 node, 4 CPUs
[Tue Oct 27 15:26:09 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Tue Oct 27 15:26:09 2026] CPU: All CPU(s) started in HYP mode.
[Tue Oct 27 15:26:09 2026] CPU: Virtualization extensions available.
[Tue Oct 27 15:26:09 2026] devtmpfs: initialized
[Tue Oct 27 15:26:09 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Tue Oct 27 15:26:09 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Tue Oct 27 15:26:09 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Tue Oct 27 15:26:09 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] pinctrl core: initialized pinctrl subsystem
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 16
[Tue Oct 27 15:26:09 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Tue Oct 27 15:26:09 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Tue Oct 27 15:26:09 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Tue Oct 27 15:26:09 2026] Serial: AMBA PL011 UART driver
[Tue Oct 27 15:26:09 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Tue Oct 27 15:26:09 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Tue Oct 27 15:26:09 2026] SCSI subsystem initialized
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbfs
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver hub
[Tue Oct 27 15:26:09 2026] usbcore: registered new device driver usb
[Tue Oct 27 15:26:09 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Tue Oct 27 15:26:09 2026] clocksource: Switched to clocksource arch_sys_counter
[Tue Oct 27 15:26:09 2026] VFS: Disk quotas dquot_6.6.0
[Tue Oct 27 15:26:09 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Tue Oct 27 15:26:09 2026] FS-Cache: Loaded
[Tue Oct 27 15:26:09 2026] CacheFiles: Loaded
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 2
[Tue Oct 27 15:26:09 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Tue Oct 27 15:26:09 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Tue Oct 27 15:26:09 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 1
[Tue Oct 27 15:26:09 2026] RPC: Registered named UNIX socket transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered udp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Tue Oct 27 15:26:09 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Tue Oct 27 15:26:09 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Tue Oct 27 15:26:09 2026] FS-Cache: Netfs 'nfs' registered for caching
[Tue Oct 27 15:26:09 2026] NFS: Registering the id_resolver key type
[Tue Oct 27 15:26:09 2026] Key type id_resolver registered
[Tue Oct 27 15:26:09 2026] Key type id_legacy registered
[Tue Oct 27 15:26:09 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Tue Oct 27 15:26:09 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Tue Oct 27 15:26:09 2026] io scheduler noop registered
[Tue Oct 27 15:26:09 2026] io scheduler deadline registered (default)
[Tue Oct 27 15:26:09 2026] io scheduler cfq registered
[Tue Oct 27 15:26:09 2026] io scheduler mq-deadline registered
[Tue Oct 27 15:26:09 2026] io scheduler kyber registered
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA memory f7910000
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Tue Oct 27 15:26:09 2026] Console: switching to colour frame buffer device 90x30
[Tue Oct 27 15:26:09 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Tue Oct 27 15:26:09 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Tue Oct 27 15:26:09 2026] vc-sm: Videocore shared memory driver
[Tue Oct 27 15:26:09 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Tue Oct 27 15:26:09 2026] brd: module loaded
[Tue Oct 27 15:26:09 2026] loop: module loaded
[Tue Oct 27 15:26:09 2026] Loading iSCSI transport class v2.0-870.
[Tue Oct 27 15:26:09 2026] libphy: Fixed MDIO Bus: probed
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver lan78xx
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver smsc95xx
[Tue Oct 27 15:26:09 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Tue Oct 27 15:26:09 2026] Core Release: 2.80a
[Tue Oct 27 15:26:09 2026] Setting default values for core params
[Tue Oct 27 15:26:09 2026] Finished setting default values for core params
[Tue Oct 27 15:26:09 2026] Using Buffer DMA mode
[Tue Oct 27 15:26:09 2026] Periodic Transfer Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] Multiprocessor Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Tue Oct 27 15:26:09 2026] Dedicated Tx FIFOs mode
[Tue Oct 27 15:26:09 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Tue Oct 27 15:26:09 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: Microframe scheduler enabled
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Tue Oct 27 15:26:09 2026] Init: Port Power? op_state=1
[Tue Oct 27 15:26:09 2026] Init: Power Port (0)
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Oct 27 15:26:09 2026] usb usb1: Product: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Tue Oct 27 15:26:09 2026] usb usb1: SerialNumber: 3f980000.usb
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: USB hub found
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: 1 port detected
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: NAK holdoff enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ split-transaction FSM enabled
[Tue Oct 27 15:26:09 2026] Module dwc_common_port init
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usb-storage
[Tue Oct 27 15:26:09 2026] mousedev: PS/2 mouse device common for all mice
[Tue Oct 27 15:26:09 2026] IR NEC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC5(x/sz) protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC6 protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR JVC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sony protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR SANYO protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sharp protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR MCE Keyboard/mouse protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR XMP protocol handler initialized
[Tue Oct 27 15:26:09 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Tue Oct 27 15:26:09 2026] bcm2835-cpufreq: min=600000 max=1200000
[Tue Oct 27 15:26:09 2026] sdhci: Secure Digital Host Controller Interface driver
[Tue Oct 27 15:26:09 2026] sdhci: Copyright(c) Pierre Ossman
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Tue Oct 27 15:26:09 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Tue Oct 27 15:26:09 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbhid
[Tue Oct 27 15:26:09 2026] usbhid: USB HID core driver
[Tue Oct 27 15:26:09 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: start
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: end - returning 0
[Tue Oct 27 15:26:09 2026] Initializing XFRM netlink socket
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 17
[Tue Oct 27 15:26:09 2026] Key type dns_resolver registered
[Tue Oct 27 15:26:09 2026] Registering SWP/SWPB emulation handler
[Tue Oct 27 15:26:09 2026] registered taskstats version 1
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Tue Oct 27 15:26:09 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Tue Oct 27 15:26:09 2026] sdhost: log_buf @ b7907000 (f7907000)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Tue Oct 27 15:26:09 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Tue Oct 27 15:26:09 2026] of_cfs_init
[Tue Oct 27 15:26:09 2026] of_cfs_init: OK
[Tue Oct 27 15:26:09 2026] Waiting for root device /dev/mmcblk0p2...
[Tue Oct 27 15:26:09 2026] random: fast init done
[Tue Oct 27 15:26:09 2026] Indeed it is in host mode hprt0 = 00021501
[Tue Oct 27 15:26:09 2026] mmc1: new high speed SDIO card at address 0001
[Tue Oct 27 15:26:09 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Tue Oct 27 15:26:09 2026] mmc0: new high speed SDHC card at address aaaa
[Tue Oct 27 15:26:09 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Tue Oct 27 15:26:10 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue Oct 27 15:26:10 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Tue Oct 27 15:26:10 2026] Indeed it is in host mode hprt0 = 00001101
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): recovery complete
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:10 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Oct 27 15:26:10 2026] devtmpfs: mounted
[Tue Oct 27 15:26:10 2026] Freeing unused kernel memory: 1024K
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: USB hub found
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: 5 ports detected
[Tue Oct 27 15:26:10 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Tue Oct 27 15:26:10 2026] systemd[1]: System time before build time, advancing clock.
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] smsc95xx v1.0.6
[Tue Oct 27 15:26:10 2026] NET: Registered protocol family 10
[Tue Oct 27 15:26:10 2026] Segment Routing with IPv6
[Tue Oct 27 15:26:10 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Tue Oct 27 15:26:10 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Tue Oct 27 15:26:10 2026] systemd[1]: Detected architecture arm.
[Tue Oct 27 15:26:10 2026] systemd[1]: Set hostname to <TM06202302>.
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Tue Oct 27 15:26:10 2026] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:11 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on Journal Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Kernel Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Control Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Created slice System Slice.
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting POSIX Message Queue File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting RPC Pipe File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Starting Set the console keyboard layout...
[Tue Oct 27 15:26:11 2026] i2c /dev entries driver
[Tue Oct 27 15:26:12 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Tue Oct 27 15:26:12 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Tue Oct 27 15:26:12 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Tue Oct 27 15:26:13 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Tue Oct 27 15:26:13 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver brcmfmac
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial_generic
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for generic
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver cp210x
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for cp210x
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] systemd-journald[102]: Received request to flush runtime journal from PID 1
[Tue Oct 27 15:26:14 2026] uart-pl011 3f201000.serial: no DMA platform data
[Tue Oct 27 15:26:15 2026] random: crng init done
[Tue Oct 27 15:26:15 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Tue Oct 27 15:26:16 2026] brcmfmac: power management disabled
[Tue Oct 27 15:26:16 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Tue Oct 27 15:26:17 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:26:17 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Tue Oct 27 15:26:17 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Tue Oct 27 15:26:19 2026] Bluetooth: Core ver 2.22
[Tue Oct 27 15:26:19 2026] NET: Registered protocol family 31
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI device and connection manager initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: L2CAP socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: SCO socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART driver ver 2.3
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol H4 registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Broadcom registered
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP filters: protocol multicast
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM TTY layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM ver 1.11
[Tue Oct 27 15:26:20 2026] NET: Registered protocol family 38
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): recovery complete
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:22 2026] fuse init (API version 7.26)
[Tue Oct 27 15:26:24 2026] usb 1-1.2: USB disconnect, device number 4
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.0: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.1: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.2: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.3: device disconnected
[Tue Oct 27 15:26:25 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:26 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:41:40 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:41:42 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:46:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:46:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:47:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:47:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:48:24 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:48:26 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:09:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 17:17:57 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:17:59 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:21:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:21:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:41:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:41:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:56:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:57:03 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:12:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:12:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:25 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:50 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 19:34:19 2026] Voltage normalised (0x00000000)
[Tue Oct 27 19:34:21 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:13:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:13:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:25:30 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 20:33:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:33:53 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:55 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:42:51 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:42:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:54:28 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:54:30 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:26:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:26:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:52:11 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:52:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:56:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:56:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:06:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:06:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:24:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:24:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:27:00 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:27:02 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:34:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 22:37:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:38:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:39:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:39:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:41:23 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:41:25 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:54:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:54:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:06:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 23:07:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:07:48 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:12:12 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:12:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:14:29 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:14:31 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:27:58 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:28:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:34:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:34:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:38:41 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:38:43 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:42:03 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:42:06 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:54:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:55:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:59:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:59:54 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:03:10 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:03:12 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:24:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 00:39:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:39:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:54:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:54:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:01:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:14:12 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:14:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:24:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:24:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:34:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:34:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:58:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:58:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:11:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:11:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:37:01 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:37:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:42:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:42:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:59:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:59:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:01:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:13:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:13:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:15:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:15:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:55:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:55:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:13:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:13:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:43:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:43:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:49:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:49:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:02:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:02:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:10:41 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:10:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:20:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:20:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:25:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:25:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:26:57 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:26:59 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:28:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:28:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:43:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:43:48 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:50:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:50:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:55:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:55:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:04:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:10:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:11:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:22:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:22:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:47:50 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:47:52 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:50:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:55:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:55:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:16:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:16:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:24:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:35:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:35:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:47:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:48:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:50:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:50:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:53:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:53:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:14:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:14:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:15:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:15:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:21:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:21:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:23:55 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:23:57 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:33:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:33:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:40:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:40:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:48:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 08:56:29 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:31 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:56:53 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:38:42 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:38:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:43:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:43:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:45:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 09:50:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:50:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:00:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:00:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:01:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:01:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:13:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:13:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:19:09 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:19:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:29:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:29:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:38:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:39:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:44:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:46:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:14:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:14:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:20:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:20:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:22:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:29:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:29:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:44:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:44:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:46:31 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 12:24:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:25:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 12:32:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 12:43:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:43:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 13:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:17:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 14:38:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 14:38:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 14:50:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 15:08:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 15:08:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:28:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:28:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:37:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:37:55 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:52:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:52:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:13:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:14:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:16:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:16:20 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:31:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:31:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:49:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:49:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:53:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:53:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:57:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:57:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:05:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:05:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:06:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:06:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:08:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:08:26 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:39:46 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 18:41:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:41:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:45:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:45:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:23:25 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:23:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:29:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:29:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:02:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 20:07:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:07:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:17:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:18:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:41:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:41:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:48:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:48:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:16:14 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:16:16 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:24:27 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:24:29 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:27:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:27:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:30:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:30:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:39:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:39:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:40:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:40:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:43:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:43:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:47:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:47:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:49:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:49:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:55:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:55:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:09:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:09:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:11:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:11:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:26:47 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:26:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:29:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:29:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:40:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:41:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:13:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 23:13:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:48:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:34:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:40:13 2026] Voltage normalised (0x00000000)
[Thu Oct 29 00:40:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:11:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:11:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:25:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:25:50 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:27:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:27:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:36:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:36:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:37:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 01:41:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:41:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:42:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:42:12 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:58:56 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:58:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:21:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:21:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:44:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:44:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:55:18 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:55:20 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:59:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:59:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:05:24 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:45 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:28:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:28:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:39:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:39:45 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:43:23 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:43:25 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:01:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:01:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:10:07 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 04:12:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:12:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:14:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:14:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:19:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:19:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:21:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:21:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:22:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:22:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:09:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:09:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:15:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:15:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:30:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:30:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:34:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:34:51 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:36:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 05:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:01:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:01:11 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:02:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:03:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:05:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:05:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:13:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:14:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:23:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:23:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:30:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:30:27 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:59:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:59:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 07:05:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 07:13:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 07:13:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:26:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:26:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:27 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:29 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:33:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:13 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:27:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:27:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:28:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:28:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:29:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:30:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:37:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:37:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:38:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:38:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:45:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:45:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:04:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:04:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:13:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:13:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:15:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:15:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:35:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:35:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:44:50 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:44:54 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:58:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:58:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 11:14:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:14:49 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:15:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:15:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:26:11 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:26:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:06:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:17 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:22:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:22:56 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:31:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:31:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:48:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:49:00 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 13:06:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:06:52 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:08:00 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:08:02 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:21 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:44 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:23:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:23:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:06:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:10:47 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:10:49 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:21:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:21:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:39:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 15:17:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 15:17:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:18:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:18:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:19:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:19:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:23:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 16:37:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:44:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:44:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:49:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:49:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:54:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 17:16:07 2026] cp210x ttyUSB1: failed to get comm status: -71
[Thu Oct 29 17:18:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:19:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:37:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:56:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:56:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:06:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:07:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:53:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:58:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:58:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:01:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 19:04:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:04:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:28:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:28:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:32:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:32:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:05:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:05:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:43:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:43:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:53:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 20:56:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:56:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 22:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 22:07:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 23:00:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:00:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:03:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:03:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:16:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:16:14 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:36:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:36:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:44:52 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:08:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:08:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:12:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:12:59 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:25:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:25:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:24 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:26 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:49:58 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:49:58 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:50:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:50:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:08:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:08:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:16:23 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:16:25 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 02:58:19 2026] Voltage normalised (0x00000000)
[Fri Oct 30 02:58:21 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:33:44 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:33:46 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:39:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:39:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:29:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:29:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:41:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:41:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:49:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:49:26 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:54:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:54:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:01:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:01:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:16:48 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 05:56:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:56:11 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:57:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:57:14 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:04:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:04:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:19:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 06:31:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:31:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:54:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:54:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:29:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:29:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:39:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:39:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:09:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:09:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:35 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:50:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:50:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:00:51 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:00:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:01:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:01:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:03:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:03:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:16 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:28:31 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:28:33 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:32:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:32:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:48:50 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:48:52 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:41:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:41:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:55:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:55:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:03:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:16:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:17:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:20:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:20:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:22:01 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:22:03 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:24:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:24:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:31:41 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:52:48 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:52:50 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:54:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:54:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 12:07:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:44:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 12:44:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 13:12:40 2026] Voltage normalised (0x00000000)
[Fri Oct 30 13:12:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:39:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:39:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:40:27 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:40:29 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:08:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:08:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:23:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:23:51 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:17:29 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:17:31 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:44:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:55:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:55:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:08:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:08:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:13:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:13:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 17:23:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:23:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:29:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:29:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:34:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:34:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 18:31:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 18:31:18 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:23:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:23:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:54:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:54:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 20:33:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 20:33:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:50:50 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:51:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:14:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 22:14:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 22:19:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:19:27 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:33:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:34:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:05:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:05:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:18:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:18:52 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:45:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:45:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:30 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:32 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:57:22 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:57:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:26:09 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:26:11 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:34:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:34:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:52:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 00:59:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:59:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 01:23:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 01:23:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:07:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:07:12 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:35:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:35:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:46:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:47:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:06:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:20:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:20:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:46:31 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:46:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:49:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:49:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:56:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:56:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:04:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:04:58 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:08:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:22 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:47:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:53:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:54:01 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:07:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:07:22 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:08:01 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:08:03 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:10:58 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:11:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:14:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:14:51 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:47:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:47:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:00:45 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:00:47 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:18:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:18:53 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:19:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:20:04 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:23:40 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 06:36:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:36:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:55:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 07:29:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 07:29:59 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 07:56:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 07:56:18 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:08:55 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:08:57 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:11:15 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:11:19 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:16:25 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:16:27 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:27:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:27:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:37:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:37:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:43:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:43:19 2026] Under-voltage detected! (0x00050005)

=================================================
=================================================

DateTime: 26-10-31 11:00:06

-------------------------------------------------

[Tue Oct 27 15:26:09 2026] Booting Linux on physical CPU 0x0
[Tue Oct 27 15:26:09 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Tue Oct 27 15:26:09 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Tue Oct 27 15:26:09 2026] CPU: div instructions available: patching division code
[Tue Oct 27 15:26:09 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Tue Oct 27 15:26:09 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Tue Oct 27 15:26:09 2026] Memory policy: Data cache writealloc
[Tue Oct 27 15:26:09 2026] cma: Reserved 8 MiB at 0x37800000
[Tue Oct 27 15:26:09 2026] On node 0 totalpages: 229376
[Tue Oct 27 15:26:09 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Tue Oct 27 15:26:09 2026]   Normal zone: 2016 pages used for memmap
[Tue Oct 27 15:26:09 2026]   Normal zone: 0 pages reserved
[Tue Oct 27 15:26:09 2026]   Normal zone: 229376 pages, LIFO batch:31
[Tue Oct 27 15:26:09 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Tue Oct 27 15:26:09 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Tue Oct 27 15:26:09 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Tue Oct 27 15:26:09 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Tue Oct 27 15:26:09 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Tue Oct 27 15:26:09 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Tue Oct 27 15:26:09 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Tue Oct 27 15:26:09 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Tue Oct 27 15:26:09 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Tue Oct 27 15:26:09 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Tue Oct 27 15:26:09 2026] ftrace: allocating 25298 entries in 75 pages
[Tue Oct 27 15:26:09 2026] Hierarchical RCU implementation.
[Tue Oct 27 15:26:09 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Tue Oct 27 15:26:09 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Tue Oct 27 15:26:09 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Tue Oct 27 15:26:09 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Tue Oct 27 15:26:09 2026] Switching to timer-based delay loop, resolution 52ns
[Tue Oct 27 15:26:09 2026] Console: colour dummy device 80x30
[Tue Oct 27 15:26:09 2026] console [tty1] enabled
[Tue Oct 27 15:26:09 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Tue Oct 27 15:26:09 2026] pid_max: default: 32768 minimum: 301
[Tue Oct 27 15:26:09 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Disabling memory control group subsystem
[Tue Oct 27 15:26:09 2026] CPU: Testing write buffer coherency: ok
[Tue Oct 27 15:26:09 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Tue Oct 27 15:26:09 2026] Setting up static identity map for 0x100000 - 0x10003c
[Tue Oct 27 15:26:09 2026] Hierarchical SRCU implementation.
[Tue Oct 27 15:26:09 2026] smp: Bringing up secondary CPUs ...
[Tue Oct 27 15:26:09 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Tue Oct 27 15:26:09 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Tue Oct 27 15:26:09 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Tue Oct 27 15:26:09 2026] smp: Brought up 1 node, 4 CPUs
[Tue Oct 27 15:26:09 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Tue Oct 27 15:26:09 2026] CPU: All CPU(s) started in HYP mode.
[Tue Oct 27 15:26:09 2026] CPU: Virtualization extensions available.
[Tue Oct 27 15:26:09 2026] devtmpfs: initialized
[Tue Oct 27 15:26:09 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Tue Oct 27 15:26:09 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Tue Oct 27 15:26:09 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Tue Oct 27 15:26:09 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] pinctrl core: initialized pinctrl subsystem
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 16
[Tue Oct 27 15:26:09 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Tue Oct 27 15:26:09 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Tue Oct 27 15:26:09 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Tue Oct 27 15:26:09 2026] Serial: AMBA PL011 UART driver
[Tue Oct 27 15:26:09 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Tue Oct 27 15:26:09 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Tue Oct 27 15:26:09 2026] SCSI subsystem initialized
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbfs
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver hub
[Tue Oct 27 15:26:09 2026] usbcore: registered new device driver usb
[Tue Oct 27 15:26:09 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Tue Oct 27 15:26:09 2026] clocksource: Switched to clocksource arch_sys_counter
[Tue Oct 27 15:26:09 2026] VFS: Disk quotas dquot_6.6.0
[Tue Oct 27 15:26:09 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Tue Oct 27 15:26:09 2026] FS-Cache: Loaded
[Tue Oct 27 15:26:09 2026] CacheFiles: Loaded
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 2
[Tue Oct 27 15:26:09 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Tue Oct 27 15:26:09 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Tue Oct 27 15:26:09 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 1
[Tue Oct 27 15:26:09 2026] RPC: Registered named UNIX socket transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered udp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Tue Oct 27 15:26:09 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Tue Oct 27 15:26:09 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Tue Oct 27 15:26:09 2026] FS-Cache: Netfs 'nfs' registered for caching
[Tue Oct 27 15:26:09 2026] NFS: Registering the id_resolver key type
[Tue Oct 27 15:26:09 2026] Key type id_resolver registered
[Tue Oct 27 15:26:09 2026] Key type id_legacy registered
[Tue Oct 27 15:26:09 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Tue Oct 27 15:26:09 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Tue Oct 27 15:26:09 2026] io scheduler noop registered
[Tue Oct 27 15:26:09 2026] io scheduler deadline registered (default)
[Tue Oct 27 15:26:09 2026] io scheduler cfq registered
[Tue Oct 27 15:26:09 2026] io scheduler mq-deadline registered
[Tue Oct 27 15:26:09 2026] io scheduler kyber registered
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA memory f7910000
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Tue Oct 27 15:26:09 2026] Console: switching to colour frame buffer device 90x30
[Tue Oct 27 15:26:09 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Tue Oct 27 15:26:09 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Tue Oct 27 15:26:09 2026] vc-sm: Videocore shared memory driver
[Tue Oct 27 15:26:09 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Tue Oct 27 15:26:09 2026] brd: module loaded
[Tue Oct 27 15:26:09 2026] loop: module loaded
[Tue Oct 27 15:26:09 2026] Loading iSCSI transport class v2.0-870.
[Tue Oct 27 15:26:09 2026] libphy: Fixed MDIO Bus: probed
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver lan78xx
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver smsc95xx
[Tue Oct 27 15:26:09 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Tue Oct 27 15:26:09 2026] Core Release: 2.80a
[Tue Oct 27 15:26:09 2026] Setting default values for core params
[Tue Oct 27 15:26:09 2026] Finished setting default values for core params
[Tue Oct 27 15:26:09 2026] Using Buffer DMA mode
[Tue Oct 27 15:26:09 2026] Periodic Transfer Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] Multiprocessor Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Tue Oct 27 15:26:09 2026] Dedicated Tx FIFOs mode
[Tue Oct 27 15:26:09 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Tue Oct 27 15:26:09 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: Microframe scheduler enabled
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Tue Oct 27 15:26:09 2026] Init: Port Power? op_state=1
[Tue Oct 27 15:26:09 2026] Init: Power Port (0)
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Oct 27 15:26:09 2026] usb usb1: Product: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Tue Oct 27 15:26:09 2026] usb usb1: SerialNumber: 3f980000.usb
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: USB hub found
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: 1 port detected
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: NAK holdoff enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ split-transaction FSM enabled
[Tue Oct 27 15:26:09 2026] Module dwc_common_port init
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usb-storage
[Tue Oct 27 15:26:09 2026] mousedev: PS/2 mouse device common for all mice
[Tue Oct 27 15:26:09 2026] IR NEC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC5(x/sz) protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC6 protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR JVC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sony protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR SANYO protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sharp protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR MCE Keyboard/mouse protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR XMP protocol handler initialized
[Tue Oct 27 15:26:09 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Tue Oct 27 15:26:09 2026] bcm2835-cpufreq: min=600000 max=1200000
[Tue Oct 27 15:26:09 2026] sdhci: Secure Digital Host Controller Interface driver
[Tue Oct 27 15:26:09 2026] sdhci: Copyright(c) Pierre Ossman
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Tue Oct 27 15:26:09 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Tue Oct 27 15:26:09 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbhid
[Tue Oct 27 15:26:09 2026] usbhid: USB HID core driver
[Tue Oct 27 15:26:09 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: start
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: end - returning 0
[Tue Oct 27 15:26:09 2026] Initializing XFRM netlink socket
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 17
[Tue Oct 27 15:26:09 2026] Key type dns_resolver registered
[Tue Oct 27 15:26:09 2026] Registering SWP/SWPB emulation handler
[Tue Oct 27 15:26:09 2026] registered taskstats version 1
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Tue Oct 27 15:26:09 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Tue Oct 27 15:26:09 2026] sdhost: log_buf @ b7907000 (f7907000)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Tue Oct 27 15:26:09 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Tue Oct 27 15:26:09 2026] of_cfs_init
[Tue Oct 27 15:26:09 2026] of_cfs_init: OK
[Tue Oct 27 15:26:09 2026] Waiting for root device /dev/mmcblk0p2...
[Tue Oct 27 15:26:09 2026] random: fast init done
[Tue Oct 27 15:26:09 2026] Indeed it is in host mode hprt0 = 00021501
[Tue Oct 27 15:26:09 2026] mmc1: new high speed SDIO card at address 0001
[Tue Oct 27 15:26:09 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Tue Oct 27 15:26:09 2026] mmc0: new high speed SDHC card at address aaaa
[Tue Oct 27 15:26:09 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Tue Oct 27 15:26:10 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue Oct 27 15:26:10 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Tue Oct 27 15:26:10 2026] Indeed it is in host mode hprt0 = 00001101
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): recovery complete
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:10 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Oct 27 15:26:10 2026] devtmpfs: mounted
[Tue Oct 27 15:26:10 2026] Freeing unused kernel memory: 1024K
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: USB hub found
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: 5 ports detected
[Tue Oct 27 15:26:10 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Tue Oct 27 15:26:10 2026] systemd[1]: System time before build time, advancing clock.
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] smsc95xx v1.0.6
[Tue Oct 27 15:26:10 2026] NET: Registered protocol family 10
[Tue Oct 27 15:26:10 2026] Segment Routing with IPv6
[Tue Oct 27 15:26:10 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Tue Oct 27 15:26:10 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Tue Oct 27 15:26:10 2026] systemd[1]: Detected architecture arm.
[Tue Oct 27 15:26:10 2026] systemd[1]: Set hostname to <TM06202302>.
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Tue Oct 27 15:26:10 2026] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:11 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on Journal Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Kernel Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Control Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Created slice System Slice.
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting POSIX Message Queue File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting RPC Pipe File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Starting Set the console keyboard layout...
[Tue Oct 27 15:26:11 2026] i2c /dev entries driver
[Tue Oct 27 15:26:12 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Tue Oct 27 15:26:12 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Tue Oct 27 15:26:12 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Tue Oct 27 15:26:13 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Tue Oct 27 15:26:13 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver brcmfmac
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial_generic
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for generic
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver cp210x
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for cp210x
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] systemd-journald[102]: Received request to flush runtime journal from PID 1
[Tue Oct 27 15:26:14 2026] uart-pl011 3f201000.serial: no DMA platform data
[Tue Oct 27 15:26:15 2026] random: crng init done
[Tue Oct 27 15:26:15 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Tue Oct 27 15:26:16 2026] brcmfmac: power management disabled
[Tue Oct 27 15:26:16 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Tue Oct 27 15:26:17 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:26:17 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Tue Oct 27 15:26:17 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Tue Oct 27 15:26:19 2026] Bluetooth: Core ver 2.22
[Tue Oct 27 15:26:19 2026] NET: Registered protocol family 31
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI device and connection manager initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: L2CAP socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: SCO socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART driver ver 2.3
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol H4 registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Broadcom registered
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP filters: protocol multicast
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM TTY layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM ver 1.11
[Tue Oct 27 15:26:20 2026] NET: Registered protocol family 38
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): recovery complete
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:22 2026] fuse init (API version 7.26)
[Tue Oct 27 15:26:24 2026] usb 1-1.2: USB disconnect, device number 4
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.0: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.1: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.2: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.3: device disconnected
[Tue Oct 27 15:26:25 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:26 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:41:40 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:41:42 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:46:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:46:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:47:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:47:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:48:24 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:48:26 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:09:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 17:17:57 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:17:59 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:21:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:21:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:41:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:41:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:56:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:57:03 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:12:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:12:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:25 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:50 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 19:34:19 2026] Voltage normalised (0x00000000)
[Tue Oct 27 19:34:21 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:13:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:13:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:25:30 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 20:33:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:33:53 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:55 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:42:51 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:42:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:54:28 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:54:30 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:26:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:26:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:52:11 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:52:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:56:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:56:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:06:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:06:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:24:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:24:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:27:00 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:27:02 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:34:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 22:37:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:38:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:39:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:39:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:41:23 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:41:25 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:54:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:54:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:06:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 23:07:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:07:48 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:12:12 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:12:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:14:29 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:14:31 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:27:58 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:28:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:34:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:34:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:38:41 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:38:43 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:42:03 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:42:06 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:54:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:55:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:59:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:59:54 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:03:10 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:03:12 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:24:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 00:39:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:39:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:54:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:54:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:01:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:14:12 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:14:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:24:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:24:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:34:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:34:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:58:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:58:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:11:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:11:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:37:01 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:37:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:42:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:42:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:59:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:59:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:01:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:13:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:13:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:15:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:15:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:55:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:55:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:13:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:13:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:43:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:43:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:49:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:49:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:02:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:02:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:10:41 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:10:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:20:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:20:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:25:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:25:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:26:57 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:26:59 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:28:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:28:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:43:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:43:48 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:50:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:50:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:55:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:55:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:04:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:10:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:11:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:22:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:22:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:47:50 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:47:52 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:50:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:55:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:55:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:16:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:16:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:24:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:35:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:35:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:47:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:48:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:50:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:50:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:53:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:53:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:14:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:14:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:15:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:15:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:21:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:21:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:23:55 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:23:57 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:33:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:33:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:40:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:40:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:48:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 08:56:29 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:31 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:56:53 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:38:42 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:38:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:43:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:43:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:45:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 09:50:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:50:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:00:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:00:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:01:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:01:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:13:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:13:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:19:09 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:19:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:29:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:29:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:38:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:39:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:44:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:46:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:14:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:14:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:20:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:20:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:22:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:29:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:29:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:44:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:44:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:46:31 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 12:24:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:25:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 12:32:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 12:43:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:43:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 13:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:17:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 14:38:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 14:38:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 14:50:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 15:08:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 15:08:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:28:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:28:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:37:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:37:55 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:52:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:52:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:13:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:14:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:16:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:16:20 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:31:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:31:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:49:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:49:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:53:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:53:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:57:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:57:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:05:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:05:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:06:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:06:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:08:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:08:26 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:39:46 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 18:41:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:41:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:45:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:45:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:23:25 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:23:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:29:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:29:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:02:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 20:07:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:07:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:17:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:18:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:41:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:41:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:48:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:48:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:16:14 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:16:16 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:24:27 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:24:29 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:27:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:27:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:30:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:30:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:39:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:39:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:40:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:40:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:43:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:43:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:47:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:47:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:49:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:49:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:55:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:55:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:09:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:09:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:11:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:11:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:26:47 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:26:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:29:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:29:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:40:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:41:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:13:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 23:13:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:48:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:34:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:40:13 2026] Voltage normalised (0x00000000)
[Thu Oct 29 00:40:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:11:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:11:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:25:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:25:50 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:27:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:27:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:36:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:36:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:37:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 01:41:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:41:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:42:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:42:12 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:58:56 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:58:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:21:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:21:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:44:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:44:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:55:18 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:55:20 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:59:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:59:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:05:24 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:45 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:28:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:28:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:39:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:39:45 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:43:23 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:43:25 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:01:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:01:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:10:07 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 04:12:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:12:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:14:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:14:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:19:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:19:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:21:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:21:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:22:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:22:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:09:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:09:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:15:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:15:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:30:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:30:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:34:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:34:51 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:36:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 05:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:01:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:01:11 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:02:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:03:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:05:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:05:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:13:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:14:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:23:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:23:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:30:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:30:27 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:59:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:59:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 07:05:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 07:13:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 07:13:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:26:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:26:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:27 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:29 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:33:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:13 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:27:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:27:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:28:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:28:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:29:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:30:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:37:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:37:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:38:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:38:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:45:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:45:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:04:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:04:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:13:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:13:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:15:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:15:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:35:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:35:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:44:50 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:44:54 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:58:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:58:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 11:14:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:14:49 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:15:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:15:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:26:11 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:26:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:06:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:17 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:22:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:22:56 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:31:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:31:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:48:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:49:00 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 13:06:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:06:52 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:08:00 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:08:02 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:21 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:44 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:23:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:23:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:06:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:10:47 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:10:49 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:21:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:21:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:39:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 15:17:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 15:17:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:18:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:18:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:19:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:19:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:23:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 16:37:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:44:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:44:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:49:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:49:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:54:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 17:16:07 2026] cp210x ttyUSB1: failed to get comm status: -71
[Thu Oct 29 17:18:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:19:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:37:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:56:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:56:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:06:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:07:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:53:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:58:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:58:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:01:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 19:04:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:04:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:28:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:28:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:32:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:32:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:05:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:05:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:43:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:43:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:53:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 20:56:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:56:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 22:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 22:07:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 23:00:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:00:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:03:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:03:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:16:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:16:14 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:36:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:36:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:44:52 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:08:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:08:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:12:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:12:59 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:25:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:25:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:24 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:26 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:49:58 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:49:58 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:50:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:50:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:08:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:08:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:16:23 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:16:25 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 02:58:19 2026] Voltage normalised (0x00000000)
[Fri Oct 30 02:58:21 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:33:44 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:33:46 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:39:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:39:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:29:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:29:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:41:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:41:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:49:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:49:26 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:54:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:54:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:01:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:01:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:16:48 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 05:56:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:56:11 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:57:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:57:14 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:04:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:04:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:19:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 06:31:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:31:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:54:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:54:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:29:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:29:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:39:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:39:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:09:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:09:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:35 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:50:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:50:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:00:51 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:00:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:01:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:01:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:03:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:03:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:16 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:28:31 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:28:33 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:32:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:32:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:48:50 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:48:52 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:41:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:41:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:55:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:55:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:03:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:16:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:17:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:20:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:20:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:22:01 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:22:03 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:24:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:24:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:31:41 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:52:48 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:52:50 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:54:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:54:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 12:07:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:44:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 12:44:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 13:12:40 2026] Voltage normalised (0x00000000)
[Fri Oct 30 13:12:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:39:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:39:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:40:27 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:40:29 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:08:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:08:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:23:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:23:51 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:17:29 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:17:31 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:44:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:55:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:55:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:08:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:08:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:13:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:13:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 17:23:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:23:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:29:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:29:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:34:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:34:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 18:31:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 18:31:18 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:23:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:23:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:54:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:54:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 20:33:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 20:33:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:50:50 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:51:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:14:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 22:14:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 22:19:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:19:27 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:33:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:34:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:05:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:05:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:18:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:18:52 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:45:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:45:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:30 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:32 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:57:22 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:57:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:26:09 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:26:11 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:34:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:34:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:52:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 00:59:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:59:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 01:23:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 01:23:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:07:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:07:12 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:35:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:35:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:46:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:47:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:06:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:20:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:20:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:46:31 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:46:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:49:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:49:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:56:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:56:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:04:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:04:58 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:08:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:22 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:47:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:53:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:54:01 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:07:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:07:22 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:08:01 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:08:03 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:10:58 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:11:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:14:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:14:51 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:47:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:47:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:00:45 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:00:47 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:18:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:18:53 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:19:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:20:04 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:23:40 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 06:36:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:36:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:55:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 07:29:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 07:29:59 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 07:56:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 07:56:18 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:08:55 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:08:57 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:11:15 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:11:19 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:16:25 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:16:27 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:27:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:27:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:37:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:37:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:43:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:43:19 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 10:20:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:20:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:21:07 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:21:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:21:13 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:32:16 2026] Voltage normalised (0x00000000)
[Sat Oct 31 10:32:18 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 10:39:01 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:51:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 10:51:55 2026] Under-voltage detected! (0x00050005)

=================================================
=================================================

DateTime: 26-10-31 12:00:05

-------------------------------------------------

[Tue Oct 27 15:26:09 2026] Booting Linux on physical CPU 0x0
[Tue Oct 27 15:26:09 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Tue Oct 27 15:26:09 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Tue Oct 27 15:26:09 2026] CPU: div instructions available: patching division code
[Tue Oct 27 15:26:09 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Tue Oct 27 15:26:09 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Tue Oct 27 15:26:09 2026] Memory policy: Data cache writealloc
[Tue Oct 27 15:26:09 2026] cma: Reserved 8 MiB at 0x37800000
[Tue Oct 27 15:26:09 2026] On node 0 totalpages: 229376
[Tue Oct 27 15:26:09 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Tue Oct 27 15:26:09 2026]   Normal zone: 2016 pages used for memmap
[Tue Oct 27 15:26:09 2026]   Normal zone: 0 pages reserved
[Tue Oct 27 15:26:09 2026]   Normal zone: 229376 pages, LIFO batch:31
[Tue Oct 27 15:26:09 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Tue Oct 27 15:26:09 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Tue Oct 27 15:26:09 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Tue Oct 27 15:26:09 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Tue Oct 27 15:26:09 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Tue Oct 27 15:26:09 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Tue Oct 27 15:26:09 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Tue Oct 27 15:26:09 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Tue Oct 27 15:26:09 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Tue Oct 27 15:26:09 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Tue Oct 27 15:26:09 2026] ftrace: allocating 25298 entries in 75 pages
[Tue Oct 27 15:26:09 2026] Hierarchical RCU implementation.
[Tue Oct 27 15:26:09 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Tue Oct 27 15:26:09 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Tue Oct 27 15:26:09 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Tue Oct 27 15:26:09 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Tue Oct 27 15:26:09 2026] Switching to timer-based delay loop, resolution 52ns
[Tue Oct 27 15:26:09 2026] Console: colour dummy device 80x30
[Tue Oct 27 15:26:09 2026] console [tty1] enabled
[Tue Oct 27 15:26:09 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Tue Oct 27 15:26:09 2026] pid_max: default: 32768 minimum: 301
[Tue Oct 27 15:26:09 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Disabling memory control group subsystem
[Tue Oct 27 15:26:09 2026] CPU: Testing write buffer coherency: ok
[Tue Oct 27 15:26:09 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Tue Oct 27 15:26:09 2026] Setting up static identity map for 0x100000 - 0x10003c
[Tue Oct 27 15:26:09 2026] Hierarchical SRCU implementation.
[Tue Oct 27 15:26:09 2026] smp: Bringing up secondary CPUs ...
[Tue Oct 27 15:26:09 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Tue Oct 27 15:26:09 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Tue Oct 27 15:26:09 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Tue Oct 27 15:26:09 2026] smp: Brought up 1 node, 4 CPUs
[Tue Oct 27 15:26:09 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Tue Oct 27 15:26:09 2026] CPU: All CPU(s) started in HYP mode.
[Tue Oct 27 15:26:09 2026] CPU: Virtualization extensions available.
[Tue Oct 27 15:26:09 2026] devtmpfs: initialized
[Tue Oct 27 15:26:09 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Tue Oct 27 15:26:09 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Tue Oct 27 15:26:09 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Tue Oct 27 15:26:09 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] pinctrl core: initialized pinctrl subsystem
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 16
[Tue Oct 27 15:26:09 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Tue Oct 27 15:26:09 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Tue Oct 27 15:26:09 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Tue Oct 27 15:26:09 2026] Serial: AMBA PL011 UART driver
[Tue Oct 27 15:26:09 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Tue Oct 27 15:26:09 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Tue Oct 27 15:26:09 2026] SCSI subsystem initialized
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbfs
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver hub
[Tue Oct 27 15:26:09 2026] usbcore: registered new device driver usb
[Tue Oct 27 15:26:09 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Tue Oct 27 15:26:09 2026] clocksource: Switched to clocksource arch_sys_counter
[Tue Oct 27 15:26:09 2026] VFS: Disk quotas dquot_6.6.0
[Tue Oct 27 15:26:09 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Tue Oct 27 15:26:09 2026] FS-Cache: Loaded
[Tue Oct 27 15:26:09 2026] CacheFiles: Loaded
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 2
[Tue Oct 27 15:26:09 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Tue Oct 27 15:26:09 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Tue Oct 27 15:26:09 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 1
[Tue Oct 27 15:26:09 2026] RPC: Registered named UNIX socket transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered udp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Tue Oct 27 15:26:09 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Tue Oct 27 15:26:09 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Tue Oct 27 15:26:09 2026] FS-Cache: Netfs 'nfs' registered for caching
[Tue Oct 27 15:26:09 2026] NFS: Registering the id_resolver key type
[Tue Oct 27 15:26:09 2026] Key type id_resolver registered
[Tue Oct 27 15:26:09 2026] Key type id_legacy registered
[Tue Oct 27 15:26:09 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Tue Oct 27 15:26:09 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Tue Oct 27 15:26:09 2026] io scheduler noop registered
[Tue Oct 27 15:26:09 2026] io scheduler deadline registered (default)
[Tue Oct 27 15:26:09 2026] io scheduler cfq registered
[Tue Oct 27 15:26:09 2026] io scheduler mq-deadline registered
[Tue Oct 27 15:26:09 2026] io scheduler kyber registered
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA memory f7910000
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Tue Oct 27 15:26:09 2026] Console: switching to colour frame buffer device 90x30
[Tue Oct 27 15:26:09 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Tue Oct 27 15:26:09 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Tue Oct 27 15:26:09 2026] vc-sm: Videocore shared memory driver
[Tue Oct 27 15:26:09 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Tue Oct 27 15:26:09 2026] brd: module loaded
[Tue Oct 27 15:26:09 2026] loop: module loaded
[Tue Oct 27 15:26:09 2026] Loading iSCSI transport class v2.0-870.
[Tue Oct 27 15:26:09 2026] libphy: Fixed MDIO Bus: probed
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver lan78xx
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver smsc95xx
[Tue Oct 27 15:26:09 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Tue Oct 27 15:26:09 2026] Core Release: 2.80a
[Tue Oct 27 15:26:09 2026] Setting default values for core params
[Tue Oct 27 15:26:09 2026] Finished setting default values for core params
[Tue Oct 27 15:26:09 2026] Using Buffer DMA mode
[Tue Oct 27 15:26:09 2026] Periodic Transfer Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] Multiprocessor Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Tue Oct 27 15:26:09 2026] Dedicated Tx FIFOs mode
[Tue Oct 27 15:26:09 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Tue Oct 27 15:26:09 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: Microframe scheduler enabled
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Tue Oct 27 15:26:09 2026] Init: Port Power? op_state=1
[Tue Oct 27 15:26:09 2026] Init: Power Port (0)
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Oct 27 15:26:09 2026] usb usb1: Product: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Tue Oct 27 15:26:09 2026] usb usb1: SerialNumber: 3f980000.usb
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: USB hub found
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: 1 port detected
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: NAK holdoff enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ split-transaction FSM enabled
[Tue Oct 27 15:26:09 2026] Module dwc_common_port init
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usb-storage
[Tue Oct 27 15:26:09 2026] mousedev: PS/2 mouse device common for all mice
[Tue Oct 27 15:26:09 2026] IR NEC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC5(x/sz) protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC6 protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR JVC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sony protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR SANYO protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sharp protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR MCE Keyboard/mouse protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR XMP protocol handler initialized
[Tue Oct 27 15:26:09 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Tue Oct 27 15:26:09 2026] bcm2835-cpufreq: min=600000 max=1200000
[Tue Oct 27 15:26:09 2026] sdhci: Secure Digital Host Controller Interface driver
[Tue Oct 27 15:26:09 2026] sdhci: Copyright(c) Pierre Ossman
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Tue Oct 27 15:26:09 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Tue Oct 27 15:26:09 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbhid
[Tue Oct 27 15:26:09 2026] usbhid: USB HID core driver
[Tue Oct 27 15:26:09 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: start
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: end - returning 0
[Tue Oct 27 15:26:09 2026] Initializing XFRM netlink socket
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 17
[Tue Oct 27 15:26:09 2026] Key type dns_resolver registered
[Tue Oct 27 15:26:09 2026] Registering SWP/SWPB emulation handler
[Tue Oct 27 15:26:09 2026] registered taskstats version 1
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Tue Oct 27 15:26:09 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Tue Oct 27 15:26:09 2026] sdhost: log_buf @ b7907000 (f7907000)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Tue Oct 27 15:26:09 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Tue Oct 27 15:26:09 2026] of_cfs_init
[Tue Oct 27 15:26:09 2026] of_cfs_init: OK
[Tue Oct 27 15:26:09 2026] Waiting for root device /dev/mmcblk0p2...
[Tue Oct 27 15:26:09 2026] random: fast init done
[Tue Oct 27 15:26:09 2026] Indeed it is in host mode hprt0 = 00021501
[Tue Oct 27 15:26:09 2026] mmc1: new high speed SDIO card at address 0001
[Tue Oct 27 15:26:09 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Tue Oct 27 15:26:09 2026] mmc0: new high speed SDHC card at address aaaa
[Tue Oct 27 15:26:09 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Tue Oct 27 15:26:10 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue Oct 27 15:26:10 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Tue Oct 27 15:26:10 2026] Indeed it is in host mode hprt0 = 00001101
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): recovery complete
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:10 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Oct 27 15:26:10 2026] devtmpfs: mounted
[Tue Oct 27 15:26:10 2026] Freeing unused kernel memory: 1024K
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: USB hub found
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: 5 ports detected
[Tue Oct 27 15:26:10 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Tue Oct 27 15:26:10 2026] systemd[1]: System time before build time, advancing clock.
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] smsc95xx v1.0.6
[Tue Oct 27 15:26:10 2026] NET: Registered protocol family 10
[Tue Oct 27 15:26:10 2026] Segment Routing with IPv6
[Tue Oct 27 15:26:10 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Tue Oct 27 15:26:10 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Tue Oct 27 15:26:10 2026] systemd[1]: Detected architecture arm.
[Tue Oct 27 15:26:10 2026] systemd[1]: Set hostname to <TM06202302>.
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Tue Oct 27 15:26:10 2026] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:11 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on Journal Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Kernel Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Control Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Created slice System Slice.
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting POSIX Message Queue File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting RPC Pipe File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Starting Set the console keyboard layout...
[Tue Oct 27 15:26:11 2026] i2c /dev entries driver
[Tue Oct 27 15:26:12 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Tue Oct 27 15:26:12 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Tue Oct 27 15:26:12 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Tue Oct 27 15:26:13 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Tue Oct 27 15:26:13 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver brcmfmac
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial_generic
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for generic
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver cp210x
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for cp210x
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] systemd-journald[102]: Received request to flush runtime journal from PID 1
[Tue Oct 27 15:26:14 2026] uart-pl011 3f201000.serial: no DMA platform data
[Tue Oct 27 15:26:15 2026] random: crng init done
[Tue Oct 27 15:26:15 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Tue Oct 27 15:26:16 2026] brcmfmac: power management disabled
[Tue Oct 27 15:26:16 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Tue Oct 27 15:26:17 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:26:17 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Tue Oct 27 15:26:17 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Tue Oct 27 15:26:19 2026] Bluetooth: Core ver 2.22
[Tue Oct 27 15:26:19 2026] NET: Registered protocol family 31
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI device and connection manager initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: L2CAP socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: SCO socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART driver ver 2.3
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol H4 registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Broadcom registered
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP filters: protocol multicast
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM TTY layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM ver 1.11
[Tue Oct 27 15:26:20 2026] NET: Registered protocol family 38
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): recovery complete
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:22 2026] fuse init (API version 7.26)
[Tue Oct 27 15:26:24 2026] usb 1-1.2: USB disconnect, device number 4
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.0: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.1: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.2: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.3: device disconnected
[Tue Oct 27 15:26:25 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:26 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:41:40 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:41:42 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:46:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:46:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:47:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:47:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:48:24 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:48:26 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:09:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 17:17:57 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:17:59 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:21:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:21:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:41:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:41:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:56:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:57:03 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:12:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:12:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:25 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:50 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 19:34:19 2026] Voltage normalised (0x00000000)
[Tue Oct 27 19:34:21 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:13:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:13:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:25:30 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 20:33:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:33:53 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:55 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:42:51 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:42:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:54:28 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:54:30 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:26:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:26:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:52:11 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:52:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:56:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:56:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:06:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:06:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:24:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:24:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:27:00 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:27:02 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:34:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 22:37:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:38:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:39:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:39:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:41:23 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:41:25 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:54:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:54:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:06:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 23:07:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:07:48 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:12:12 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:12:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:14:29 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:14:31 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:27:58 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:28:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:34:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:34:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:38:41 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:38:43 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:42:03 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:42:06 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:54:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:55:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:59:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:59:54 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:03:10 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:03:12 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:24:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 00:39:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:39:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:54:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:54:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:01:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:14:12 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:14:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:24:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:24:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:34:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:34:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:58:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:58:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:11:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:11:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:37:01 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:37:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:42:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:42:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:59:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:59:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:01:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:13:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:13:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:15:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:15:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:55:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:55:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:13:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:13:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:43:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:43:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:49:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:49:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:02:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:02:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:10:41 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:10:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:20:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:20:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:25:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:25:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:26:57 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:26:59 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:28:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:28:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:43:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:43:48 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:50:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:50:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:55:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:55:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:04:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:10:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:11:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:22:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:22:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:47:50 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:47:52 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:50:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:55:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:55:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:16:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:16:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:24:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:35:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:35:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:47:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:48:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:50:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:50:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:53:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:53:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:14:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:14:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:15:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:15:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:21:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:21:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:23:55 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:23:57 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:33:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:33:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:40:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:40:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:48:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 08:56:29 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:31 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:56:53 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:38:42 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:38:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:43:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:43:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:45:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 09:50:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:50:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:00:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:00:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:01:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:01:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:13:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:13:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:19:09 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:19:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:29:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:29:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:38:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:39:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:44:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:46:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:14:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:14:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:20:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:20:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:22:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:29:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:29:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:44:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:44:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:46:31 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 12:24:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:25:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 12:32:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 12:43:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:43:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 13:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:17:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 14:38:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 14:38:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 14:50:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 15:08:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 15:08:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:28:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:28:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:37:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:37:55 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:52:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:52:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:13:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:14:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:16:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:16:20 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:31:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:31:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:49:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:49:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:53:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:53:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:57:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:57:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:05:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:05:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:06:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:06:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:08:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:08:26 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:39:46 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 18:41:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:41:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:45:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:45:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:23:25 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:23:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:29:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:29:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:02:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 20:07:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:07:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:17:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:18:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:41:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:41:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:48:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:48:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:16:14 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:16:16 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:24:27 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:24:29 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:27:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:27:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:30:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:30:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:39:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:39:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:40:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:40:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:43:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:43:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:47:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:47:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:49:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:49:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:55:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:55:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:09:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:09:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:11:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:11:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:26:47 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:26:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:29:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:29:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:40:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:41:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:13:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 23:13:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:48:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:34:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:40:13 2026] Voltage normalised (0x00000000)
[Thu Oct 29 00:40:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:11:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:11:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:25:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:25:50 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:27:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:27:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:36:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:36:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:37:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 01:41:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:41:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:42:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:42:12 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:58:56 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:58:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:21:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:21:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:44:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:44:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:55:18 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:55:20 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:59:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:59:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:05:24 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:45 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:28:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:28:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:39:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:39:45 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:43:23 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:43:25 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:01:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:01:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:10:07 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 04:12:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:12:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:14:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:14:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:19:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:19:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:21:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:21:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:22:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:22:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:09:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:09:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:15:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:15:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:30:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:30:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:34:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:34:51 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:36:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 05:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:01:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:01:11 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:02:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:03:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:05:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:05:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:13:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:14:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:23:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:23:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:30:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:30:27 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:59:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:59:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 07:05:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 07:13:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 07:13:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:26:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:26:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:27 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:29 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:33:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:13 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:27:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:27:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:28:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:28:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:29:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:30:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:37:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:37:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:38:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:38:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:45:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:45:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:04:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:04:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:13:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:13:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:15:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:15:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:35:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:35:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:44:50 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:44:54 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:58:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:58:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 11:14:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:14:49 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:15:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:15:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:26:11 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:26:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:06:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:17 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:22:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:22:56 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:31:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:31:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:48:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:49:00 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 13:06:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:06:52 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:08:00 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:08:02 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:21 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:44 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:23:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:23:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:06:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:10:47 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:10:49 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:21:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:21:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:39:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 15:17:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 15:17:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:18:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:18:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:19:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:19:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:23:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 16:37:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:44:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:44:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:49:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:49:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:54:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 17:16:07 2026] cp210x ttyUSB1: failed to get comm status: -71
[Thu Oct 29 17:18:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:19:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:37:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:56:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:56:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:06:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:07:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:53:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:58:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:58:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:01:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 19:04:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:04:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:28:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:28:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:32:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:32:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:05:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:05:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:43:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:43:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:53:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 20:56:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:56:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 22:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 22:07:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 23:00:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:00:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:03:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:03:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:16:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:16:14 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:36:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:36:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:44:52 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:08:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:08:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:12:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:12:59 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:25:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:25:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:24 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:26 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:49:58 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:49:58 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:50:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:50:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:08:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:08:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:16:23 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:16:25 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 02:58:19 2026] Voltage normalised (0x00000000)
[Fri Oct 30 02:58:21 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:33:44 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:33:46 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:39:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:39:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:29:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:29:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:41:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:41:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:49:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:49:26 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:54:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:54:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:01:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:01:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:16:48 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 05:56:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:56:11 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:57:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:57:14 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:04:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:04:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:19:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 06:31:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:31:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:54:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:54:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:29:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:29:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:39:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:39:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:09:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:09:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:35 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:50:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:50:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:00:51 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:00:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:01:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:01:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:03:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:03:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:16 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:28:31 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:28:33 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:32:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:32:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:48:50 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:48:52 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:41:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:41:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:55:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:55:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:03:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:16:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:17:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:20:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:20:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:22:01 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:22:03 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:24:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:24:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:31:41 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:52:48 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:52:50 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:54:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:54:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 12:07:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:44:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 12:44:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 13:12:40 2026] Voltage normalised (0x00000000)
[Fri Oct 30 13:12:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:39:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:39:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:40:27 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:40:29 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:08:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:08:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:23:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:23:51 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:17:29 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:17:31 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:44:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:55:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:55:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:08:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:08:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:13:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:13:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 17:23:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:23:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:29:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:29:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:34:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:34:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 18:31:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 18:31:18 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:23:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:23:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:54:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:54:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 20:33:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 20:33:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:50:50 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:51:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:14:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 22:14:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 22:19:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:19:27 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:33:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:34:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:05:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:05:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:18:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:18:52 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:45:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:45:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:30 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:32 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:57:22 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:57:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:26:09 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:26:11 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:34:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:34:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:52:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 00:59:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:59:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 01:23:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 01:23:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:07:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:07:12 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:35:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:35:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:46:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:47:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:06:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:20:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:20:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:46:31 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:46:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:49:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:49:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:56:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:56:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:04:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:04:58 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:08:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:22 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:47:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:53:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:54:01 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:07:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:07:22 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:08:01 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:08:03 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:10:58 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:11:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:14:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:14:51 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:47:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:47:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:00:45 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:00:47 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:18:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:18:53 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:19:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:20:04 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:23:40 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 06:36:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:36:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:55:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 07:29:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 07:29:59 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 07:56:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 07:56:18 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:08:55 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:08:57 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:11:15 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:11:19 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:16:25 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:16:27 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:27:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:27:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:37:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:37:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:43:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:43:19 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 10:20:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:20:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:21:07 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:21:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:21:13 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:32:16 2026] Voltage normalised (0x00000000)
[Sat Oct 31 10:32:18 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 10:39:01 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:51:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 10:51:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 11:17:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 11:17:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 11:18:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 11:18:16 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 11:29:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 11:29:59 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 11:33:48 2026] Voltage normalised (0x00000000)
[Sat Oct 31 11:33:50 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 11:34:31 2026] Voltage normalised (0x00000000)
[Sat Oct 31 11:34:33 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 11:37:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 11:37:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 11:54:52 2026] Voltage normalised (0x00000000)
[Sat Oct 31 11:54:54 2026] Under-voltage detected! (0x00050005)

=================================================
=================================================

DateTime: 26-10-31 13:00:05

-------------------------------------------------

[Tue Oct 27 15:26:09 2026] Booting Linux on physical CPU 0x0
[Tue Oct 27 15:26:09 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Tue Oct 27 15:26:09 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Tue Oct 27 15:26:09 2026] CPU: div instructions available: patching division code
[Tue Oct 27 15:26:09 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Tue Oct 27 15:26:09 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Tue Oct 27 15:26:09 2026] Memory policy: Data cache writealloc
[Tue Oct 27 15:26:09 2026] cma: Reserved 8 MiB at 0x37800000
[Tue Oct 27 15:26:09 2026] On node 0 totalpages: 229376
[Tue Oct 27 15:26:09 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Tue Oct 27 15:26:09 2026]   Normal zone: 2016 pages used for memmap
[Tue Oct 27 15:26:09 2026]   Normal zone: 0 pages reserved
[Tue Oct 27 15:26:09 2026]   Normal zone: 229376 pages, LIFO batch:31
[Tue Oct 27 15:26:09 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Tue Oct 27 15:26:09 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Tue Oct 27 15:26:09 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Tue Oct 27 15:26:09 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Tue Oct 27 15:26:09 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Tue Oct 27 15:26:09 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Tue Oct 27 15:26:09 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Tue Oct 27 15:26:09 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Tue Oct 27 15:26:09 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Tue Oct 27 15:26:09 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Tue Oct 27 15:26:09 2026] ftrace: allocating 25298 entries in 75 pages
[Tue Oct 27 15:26:09 2026] Hierarchical RCU implementation.
[Tue Oct 27 15:26:09 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Tue Oct 27 15:26:09 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Tue Oct 27 15:26:09 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Tue Oct 27 15:26:09 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Tue Oct 27 15:26:09 2026] Switching to timer-based delay loop, resolution 52ns
[Tue Oct 27 15:26:09 2026] Console: colour dummy device 80x30
[Tue Oct 27 15:26:09 2026] console [tty1] enabled
[Tue Oct 27 15:26:09 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Tue Oct 27 15:26:09 2026] pid_max: default: 32768 minimum: 301
[Tue Oct 27 15:26:09 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Tue Oct 27 15:26:09 2026] Disabling memory control group subsystem
[Tue Oct 27 15:26:09 2026] CPU: Testing write buffer coherency: ok
[Tue Oct 27 15:26:09 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Tue Oct 27 15:26:09 2026] Setting up static identity map for 0x100000 - 0x10003c
[Tue Oct 27 15:26:09 2026] Hierarchical SRCU implementation.
[Tue Oct 27 15:26:09 2026] smp: Bringing up secondary CPUs ...
[Tue Oct 27 15:26:09 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Tue Oct 27 15:26:09 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Tue Oct 27 15:26:09 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Tue Oct 27 15:26:09 2026] smp: Brought up 1 node, 4 CPUs
[Tue Oct 27 15:26:09 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Tue Oct 27 15:26:09 2026] CPU: All CPU(s) started in HYP mode.
[Tue Oct 27 15:26:09 2026] CPU: Virtualization extensions available.
[Tue Oct 27 15:26:09 2026] devtmpfs: initialized
[Tue Oct 27 15:26:09 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Tue Oct 27 15:26:09 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Tue Oct 27 15:26:09 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Tue Oct 27 15:26:09 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] pinctrl core: initialized pinctrl subsystem
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 16
[Tue Oct 27 15:26:09 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Tue Oct 27 15:26:09 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Tue Oct 27 15:26:09 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Tue Oct 27 15:26:09 2026] Serial: AMBA PL011 UART driver
[Tue Oct 27 15:26:09 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Tue Oct 27 15:26:09 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Tue Oct 27 15:26:09 2026] SCSI subsystem initialized
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbfs
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver hub
[Tue Oct 27 15:26:09 2026] usbcore: registered new device driver usb
[Tue Oct 27 15:26:09 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Tue Oct 27 15:26:09 2026] clocksource: Switched to clocksource arch_sys_counter
[Tue Oct 27 15:26:09 2026] VFS: Disk quotas dquot_6.6.0
[Tue Oct 27 15:26:09 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Tue Oct 27 15:26:09 2026] FS-Cache: Loaded
[Tue Oct 27 15:26:09 2026] CacheFiles: Loaded
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 2
[Tue Oct 27 15:26:09 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Tue Oct 27 15:26:09 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Tue Oct 27 15:26:09 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Tue Oct 27 15:26:09 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 1
[Tue Oct 27 15:26:09 2026] RPC: Registered named UNIX socket transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered udp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp transport module.
[Tue Oct 27 15:26:09 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Tue Oct 27 15:26:09 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Tue Oct 27 15:26:09 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Tue Oct 27 15:26:09 2026] FS-Cache: Netfs 'nfs' registered for caching
[Tue Oct 27 15:26:09 2026] NFS: Registering the id_resolver key type
[Tue Oct 27 15:26:09 2026] Key type id_resolver registered
[Tue Oct 27 15:26:09 2026] Key type id_legacy registered
[Tue Oct 27 15:26:09 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Tue Oct 27 15:26:09 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Tue Oct 27 15:26:09 2026] io scheduler noop registered
[Tue Oct 27 15:26:09 2026] io scheduler deadline registered (default)
[Tue Oct 27 15:26:09 2026] io scheduler cfq registered
[Tue Oct 27 15:26:09 2026] io scheduler mq-deadline registered
[Tue Oct 27 15:26:09 2026] io scheduler kyber registered
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA memory f7910000
[Tue Oct 27 15:26:09 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Tue Oct 27 15:26:09 2026] Console: switching to colour frame buffer device 90x30
[Tue Oct 27 15:26:09 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Tue Oct 27 15:26:09 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Tue Oct 27 15:26:09 2026] vc-sm: Videocore shared memory driver
[Tue Oct 27 15:26:09 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Tue Oct 27 15:26:09 2026] brd: module loaded
[Tue Oct 27 15:26:09 2026] loop: module loaded
[Tue Oct 27 15:26:09 2026] Loading iSCSI transport class v2.0-870.
[Tue Oct 27 15:26:09 2026] libphy: Fixed MDIO Bus: probed
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver lan78xx
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver smsc95xx
[Tue Oct 27 15:26:09 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Tue Oct 27 15:26:09 2026] Core Release: 2.80a
[Tue Oct 27 15:26:09 2026] Setting default values for core params
[Tue Oct 27 15:26:09 2026] Finished setting default values for core params
[Tue Oct 27 15:26:09 2026] Using Buffer DMA mode
[Tue Oct 27 15:26:09 2026] Periodic Transfer Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] Multiprocessor Interrupt Enhancement - disabled
[Tue Oct 27 15:26:09 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Tue Oct 27 15:26:09 2026] Dedicated Tx FIFOs mode
[Tue Oct 27 15:26:09 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Tue Oct 27 15:26:09 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: Microframe scheduler enabled
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Tue Oct 27 15:26:09 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Tue Oct 27 15:26:09 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Tue Oct 27 15:26:09 2026] Init: Port Power? op_state=1
[Tue Oct 27 15:26:09 2026] Init: Power Port (0)
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Tue Oct 27 15:26:09 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Tue Oct 27 15:26:09 2026] usb usb1: Product: DWC OTG Controller
[Tue Oct 27 15:26:09 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Tue Oct 27 15:26:09 2026] usb usb1: SerialNumber: 3f980000.usb
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: USB hub found
[Tue Oct 27 15:26:09 2026] hub 1-0:1.0: 1 port detected
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: NAK holdoff enabled
[Tue Oct 27 15:26:09 2026] dwc_otg: FIQ split-transaction FSM enabled
[Tue Oct 27 15:26:09 2026] Module dwc_common_port init
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usb-storage
[Tue Oct 27 15:26:09 2026] mousedev: PS/2 mouse device common for all mice
[Tue Oct 27 15:26:09 2026] IR NEC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC5(x/sz) protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR RC6 protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR JVC protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sony protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR SANYO protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR Sharp protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR MCE Keyboard/mouse protocol handler initialized
[Tue Oct 27 15:26:09 2026] IR XMP protocol handler initialized
[Tue Oct 27 15:26:09 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Tue Oct 27 15:26:09 2026] bcm2835-cpufreq: min=600000 max=1200000
[Tue Oct 27 15:26:09 2026] sdhci: Secure Digital Host Controller Interface driver
[Tue Oct 27 15:26:09 2026] sdhci: Copyright(c) Pierre Ossman
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Tue Oct 27 15:26:09 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Tue Oct 27 15:26:09 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Tue Oct 27 15:26:09 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Tue Oct 27 15:26:09 2026] usbcore: registered new interface driver usbhid
[Tue Oct 27 15:26:09 2026] usbhid: USB HID core driver
[Tue Oct 27 15:26:09 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: start
[Tue Oct 27 15:26:09 2026] [vc_sm_connected_init]: end - returning 0
[Tue Oct 27 15:26:09 2026] Initializing XFRM netlink socket
[Tue Oct 27 15:26:09 2026] NET: Registered protocol family 17
[Tue Oct 27 15:26:09 2026] Key type dns_resolver registered
[Tue Oct 27 15:26:09 2026] Registering SWP/SWPB emulation handler
[Tue Oct 27 15:26:09 2026] registered taskstats version 1
[Tue Oct 27 15:26:09 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Tue Oct 27 15:26:09 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Tue Oct 27 15:26:09 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Tue Oct 27 15:26:09 2026] sdhost: log_buf @ b7907000 (f7907000)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Tue Oct 27 15:26:09 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Tue Oct 27 15:26:09 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Tue Oct 27 15:26:09 2026] of_cfs_init
[Tue Oct 27 15:26:09 2026] of_cfs_init: OK
[Tue Oct 27 15:26:09 2026] Waiting for root device /dev/mmcblk0p2...
[Tue Oct 27 15:26:09 2026] random: fast init done
[Tue Oct 27 15:26:09 2026] Indeed it is in host mode hprt0 = 00021501
[Tue Oct 27 15:26:09 2026] mmc1: new high speed SDIO card at address 0001
[Tue Oct 27 15:26:09 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Tue Oct 27 15:26:09 2026] mmc0: new high speed SDHC card at address aaaa
[Tue Oct 27 15:26:09 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Tue Oct 27 15:26:10 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Tue Oct 27 15:26:10 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Tue Oct 27 15:26:10 2026] Indeed it is in host mode hprt0 = 00001101
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): 4 orphan inodes deleted
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): recovery complete
[Tue Oct 27 15:26:10 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:10 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Tue Oct 27 15:26:10 2026] devtmpfs: mounted
[Tue Oct 27 15:26:10 2026] Freeing unused kernel memory: 1024K
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Tue Oct 27 15:26:10 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: USB hub found
[Tue Oct 27 15:26:10 2026] hub 1-1:1.0: 5 ports detected
[Tue Oct 27 15:26:10 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Tue Oct 27 15:26:10 2026] systemd[1]: System time before build time, advancing clock.
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Tue Oct 27 15:26:10 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Tue Oct 27 15:26:10 2026] smsc95xx v1.0.6
[Tue Oct 27 15:26:10 2026] NET: Registered protocol family 10
[Tue Oct 27 15:26:10 2026] Segment Routing with IPv6
[Tue Oct 27 15:26:10 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Tue Oct 27 15:26:10 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Tue Oct 27 15:26:10 2026] systemd[1]: Detected architecture arm.
[Tue Oct 27 15:26:10 2026] systemd[1]: Set hostname to <TM06202302>.
[Tue Oct 27 15:26:10 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:10 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Tue Oct 27 15:26:10 2026] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:11 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:11 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:11 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on Journal Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Kernel Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Listening on udev Control Socket.
[Tue Oct 27 15:26:11 2026] systemd[1]: Created slice System Slice.
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting POSIX Message Queue File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Mounting RPC Pipe File System...
[Tue Oct 27 15:26:11 2026] systemd[1]: Starting Set the console keyboard layout...
[Tue Oct 27 15:26:11 2026] i2c /dev entries driver
[Tue Oct 27 15:26:12 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Tue Oct 27 15:26:12 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Tue Oct 27 15:26:12 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Tue Oct 27 15:26:13 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Tue Oct 27 15:26:13 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver brcmfmac
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver usbserial_generic
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for generic
[Tue Oct 27 15:26:13 2026] usbcore: registered new interface driver cp210x
[Tue Oct 27 15:26:13 2026] usbserial: USB Serial support registered for cp210x
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:13 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:13 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Tue Oct 27 15:26:13 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:13 2026] systemd-journald[102]: Received request to flush runtime journal from PID 1
[Tue Oct 27 15:26:14 2026] uart-pl011 3f201000.serial: no DMA platform data
[Tue Oct 27 15:26:15 2026] random: crng init done
[Tue Oct 27 15:26:15 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Tue Oct 27 15:26:16 2026] brcmfmac: power management disabled
[Tue Oct 27 15:26:16 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Tue Oct 27 15:26:17 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:26:17 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Tue Oct 27 15:26:17 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Tue Oct 27 15:26:19 2026] Bluetooth: Core ver 2.22
[Tue Oct 27 15:26:19 2026] NET: Registered protocol family 31
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI device and connection manager initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: L2CAP socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: SCO socket layer initialized
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART driver ver 2.3
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol H4 registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Tue Oct 27 15:26:19 2026] Bluetooth: HCI UART protocol Broadcom registered
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP filters: protocol multicast
[Tue Oct 27 15:26:20 2026] Bluetooth: BNEP socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM TTY layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM socket layer initialized
[Tue Oct 27 15:26:20 2026] Bluetooth: RFCOMM ver 1.11
[Tue Oct 27 15:26:20 2026] NET: Registered protocol family 38
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): recovery complete
[Tue Oct 27 15:26:20 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Tue Oct 27 15:26:22 2026] fuse init (API version 7.26)
[Tue Oct 27 15:26:24 2026] usb 1-1.2: USB disconnect, device number 4
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.0: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.1: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.2: device disconnected
[Tue Oct 27 15:26:24 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Tue Oct 27 15:26:24 2026] cp210x 1-1.2:1.3: device disconnected
[Tue Oct 27 15:26:25 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Tue Oct 27 15:26:26 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Tue Oct 27 15:26:26 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Tue Oct 27 15:26:26 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Tue Oct 27 15:26:26 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Tue Oct 27 15:26:26 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Tue Oct 27 15:41:40 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:41:42 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:46:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:46:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 15:47:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:47:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 15:48:24 2026] Voltage normalised (0x00000000)
[Tue Oct 27 15:48:26 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:09:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 17:17:57 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:17:59 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:21:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:21:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:41:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:41:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 17:56:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 17:57:03 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:12:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:12:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:25 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 18:15:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 18:15:50 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 19:34:19 2026] Voltage normalised (0x00000000)
[Tue Oct 27 19:34:21 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:13:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:13:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:25:30 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 20:33:09 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:11 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:33:53 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:33:55 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:42:51 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:42:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 20:54:28 2026] Voltage normalised (0x00000000)
[Tue Oct 27 20:54:30 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:26:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:26:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:52:11 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:52:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 21:56:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 21:56:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:06:49 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:06:51 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:24:13 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:24:15 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:27:00 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:27:02 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:27 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:29 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:33:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:33:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:34:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 22:37:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:38:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:39:10 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:39:12 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:41:23 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:41:25 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 22:54:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 22:54:54 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:06:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Tue Oct 27 23:07:46 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:07:48 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:12:12 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:12:14 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:14:29 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:14:31 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:27:58 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:28:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:34:50 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:34:52 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:38:41 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:38:43 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:42:03 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:42:06 2026] cp210x ttyUSB1: failed to get comm status: -71
[Tue Oct 27 23:54:59 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:55:01 2026] Under-voltage detected! (0x00050005)
[Tue Oct 27 23:59:52 2026] Voltage normalised (0x00000000)
[Tue Oct 27 23:59:54 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:03:10 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:03:12 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:24:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 00:39:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:39:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 00:54:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 00:54:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:01:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:01:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 01:14:12 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:14:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:24:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:24:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:34:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:34:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 01:58:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 01:58:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:11:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:11:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:37:01 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:37:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:42:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:42:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 02:59:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 02:59:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:01:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:13:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:13:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:15:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:15:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 03:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 03:55:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 03:55:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:13:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:13:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:43:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:43:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:44:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:44:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 04:49:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 04:49:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:02:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:02:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:10:41 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:10:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:20:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:20:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:25:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:25:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:26:57 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:26:59 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:28:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:28:53 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:43:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:43:48 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 05:50:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:50:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 05:55:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 05:55:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:04:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:10:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:11:03 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:22:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:22:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:47:50 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:47:52 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:48:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:49:00 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 06:50:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 06:55:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 06:55:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:16:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:16:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:24:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:34 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:24:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 07:35:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:35:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:47:58 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:48:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:50:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:50:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 07:53:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 07:53:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:14:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:14:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:15:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:15:24 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:21:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:21:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:23:55 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:23:57 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:33:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:33:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:40:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:40:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:48:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 08:56:29 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:31 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 08:56:53 2026] Voltage normalised (0x00000000)
[Wed Oct 28 08:56:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:38:42 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:38:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:43:48 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:43:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 09:45:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 09:50:23 2026] Voltage normalised (0x00000000)
[Wed Oct 28 09:50:25 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:00:16 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:00:18 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:01:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:01:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:13:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:13:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:19:09 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:19:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:29:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:29:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:38:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:39:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:44:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 10:44:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 10:46:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 10:46:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:14:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:14:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:20:21 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:20:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:22:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 11:29:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:29:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:44:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 11:44:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 11:46:31 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 12:24:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:25:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 12:32:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 12:43:24 2026] Voltage normalised (0x00000000)
[Wed Oct 28 12:43:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:14:26 2026] Voltage normalised (0x00000000)
[Wed Oct 28 13:14:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 13:17:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 14:38:11 2026] Voltage normalised (0x00000000)
[Wed Oct 28 14:38:13 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 14:50:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 15:08:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 15:08:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:28:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:28:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:37:51 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:37:55 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 16:52:54 2026] Voltage normalised (0x00000000)
[Wed Oct 28 16:52:56 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:13:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:14:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:16:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:16:20 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:31:17 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:31:19 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:49:49 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:49:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:53:38 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:53:40 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:31 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:33 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:56:56 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:56:58 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 17:57:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 17:57:42 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:05:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:05:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:06:30 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:06:32 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:08:22 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:08:26 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:39:46 2026] cp210x ttyUSB1: failed to get comm status: -71
[Wed Oct 28 18:41:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:41:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 18:45:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 18:45:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:23:25 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:23:28 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 19:29:46 2026] Voltage normalised (0x00000000)
[Wed Oct 28 19:29:50 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:02:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 20:07:40 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:07:44 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:17:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:18:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:41:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:41:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 20:48:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 20:48:46 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:16:14 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:16:16 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:24:27 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:24:29 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:27:44 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:27:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:30:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:30:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:39:19 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:39:23 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:40:28 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:40:30 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:43:20 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:43:22 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:47:15 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:47:17 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:49:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:49:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 21:55:39 2026] Voltage normalised (0x00000000)
[Wed Oct 28 21:55:41 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:09:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:09:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Wed Oct 28 22:11:00 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:11:02 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:26:47 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:26:51 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:29:18 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:29:21 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 22:40:59 2026] Voltage normalised (0x00000000)
[Wed Oct 28 22:41:01 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:13:43 2026] Voltage normalised (0x00000000)
[Wed Oct 28 23:13:45 2026] Under-voltage detected! (0x00050005)
[Wed Oct 28 23:48:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:34:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 00:40:13 2026] Voltage normalised (0x00000000)
[Thu Oct 29 00:40:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:11:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:11:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:25:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:25:50 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:27:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:27:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:36:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:36:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:37:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 01:41:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:41:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:42:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:42:12 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 01:58:56 2026] Voltage normalised (0x00000000)
[Thu Oct 29 01:58:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:13:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:13:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:21:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:21:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:44:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:44:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:55:18 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:55:20 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 02:59:01 2026] Voltage normalised (0x00000000)
[Thu Oct 29 02:59:03 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:05:24 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:43 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:18:45 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 03:28:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:28:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:39:43 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:39:45 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 03:43:23 2026] Voltage normalised (0x00000000)
[Thu Oct 29 03:43:25 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:01:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:01:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:10:07 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 04:12:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:12:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:14:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:14:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:19:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:19:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:21:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:21:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 04:22:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 04:22:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:09:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:09:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:15:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:15:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:30:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:30:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:34:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:34:51 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 05:36:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 05:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 05:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:01:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:01:11 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:02:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:03:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 06:05:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:05:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:13:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:14:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:23:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:23:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:30:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:30:27 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 06:59:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 06:59:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 07:05:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 07:13:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 07:13:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:26:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:26:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:27 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:29 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:27:46 2026] Voltage normalised (0x00000000)
[Thu Oct 29 08:27:48 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 08:33:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:13 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 09:27:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:27:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:28:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:28:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:29:59 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:30:01 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:37:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:37:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:38:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:38:23 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 09:45:25 2026] Voltage normalised (0x00000000)
[Thu Oct 29 09:45:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:04:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:04:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:13:57 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:13:59 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:15:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:15:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:35:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:35:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 10:44:50 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:44:54 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 10:58:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 10:58:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 11:14:26 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:28 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:14:49 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:14:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:15:14 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:15:16 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:26:11 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:26:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:31 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:33 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 11:28:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 11:28:58 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:06:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:12 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:07:17 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:22:54 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:22:56 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:31:09 2026] Voltage normalised (0x00000000)
[Thu Oct 29 12:31:13 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 12:48:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:48:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 12:49:00 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 13:06:48 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:06:52 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:08:00 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:08:02 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:21 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:13:44 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:13:46 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 13:23:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 13:23:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:06:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:06:37 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:10:47 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:10:49 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:21:51 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:21:53 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:42 2026] Voltage normalised (0x00000000)
[Thu Oct 29 14:39:44 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 14:39:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 14:39:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 15:17:17 2026] Voltage normalised (0x00000000)
[Thu Oct 29 15:17:19 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:18:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:18:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:19:28 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:19:30 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:23:02 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 16:37:19 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:44:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:44:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:49:40 2026] Voltage normalised (0x00000000)
[Thu Oct 29 16:49:42 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 16:54:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 17:16:07 2026] cp210x ttyUSB1: failed to get comm status: -71
[Thu Oct 29 17:18:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:19:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:37:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:37:22 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 17:56:16 2026] Voltage normalised (0x00000000)
[Thu Oct 29 17:56:18 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:06:58 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:07:00 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 18:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:53:56 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 18:58:29 2026] Voltage normalised (0x00000000)
[Thu Oct 29 18:58:31 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:01:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 19:04:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:04:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:28:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:28:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 19:32:15 2026] Voltage normalised (0x00000000)
[Thu Oct 29 19:32:17 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:05:22 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:05:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:43:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:43:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:53:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 20:56:30 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:32 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 20:56:55 2026] Voltage normalised (0x00000000)
[Thu Oct 29 20:56:57 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 22:07:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 22:07:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Thu Oct 29 23:00:24 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:00:26 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:03:20 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:03:24 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:16:10 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:16:14 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:36:41 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:36:43 2026] Under-voltage detected! (0x00050005)
[Thu Oct 29 23:44:52 2026] Voltage normalised (0x00000000)
[Thu Oct 29 23:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:08:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:08:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:12:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:12:59 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:25:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:25:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:24 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:26 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:26:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:26:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 00:49:58 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:49:58 2026] Voltage normalised (0x00000000)
[Fri Oct 30 00:50:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Fri Oct 30 00:50:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:08:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:08:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 01:16:23 2026] Voltage normalised (0x00000000)
[Fri Oct 30 01:16:25 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 02:58:19 2026] Voltage normalised (0x00000000)
[Fri Oct 30 02:58:21 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:33:44 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:33:46 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 03:39:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 03:39:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:29:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:29:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:41:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:41:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 04:49:19 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:49:26 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 04:54:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 04:54:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:01:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:01:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:16:48 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 05:56:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:56:11 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 05:57:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 05:57:14 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:04:41 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:04:43 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:19:38 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 06:31:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:31:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 06:54:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 06:54:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:29:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:29:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 07:39:13 2026] Voltage normalised (0x00000000)
[Fri Oct 30 07:39:15 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:09:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:09:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 08:19:47 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:48:35 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 08:50:54 2026] Voltage normalised (0x00000000)
[Fri Oct 30 08:50:56 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:00:51 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:00:53 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:01:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:01:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:03:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:03:53 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:03 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:04:16 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 09:28:31 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:28:33 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:32:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:32:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 09:48:50 2026] Voltage normalised (0x00000000)
[Fri Oct 30 09:48:52 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:41:11 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:41:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 10:55:28 2026] Voltage normalised (0x00000000)
[Fri Oct 30 10:55:30 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:03:06 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:16:57 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:00 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:17:20 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:17:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:20:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:20:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:22:01 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:22:03 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:24:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:24:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:31:41 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 11:52:48 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:52:50 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 11:54:47 2026] Voltage normalised (0x00000000)
[Fri Oct 30 11:54:49 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 12:07:36 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:42 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:07:51 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 12:44:46 2026] Voltage normalised (0x00000000)
[Fri Oct 30 12:44:48 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 13:12:40 2026] Voltage normalised (0x00000000)
[Fri Oct 30 13:12:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:39:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:39:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 14:40:27 2026] Voltage normalised (0x00000000)
[Fri Oct 30 14:40:29 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:08:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:08:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 15:23:49 2026] Voltage normalised (0x00000000)
[Fri Oct 30 15:23:51 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:17:29 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:17:31 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:44:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:44:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 16:55:56 2026] Voltage normalised (0x00000000)
[Fri Oct 30 16:55:58 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:08:52 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:08:54 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:13:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:13:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:17:28 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 17:23:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:23:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:29:25 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:29:27 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 17:34:39 2026] Voltage normalised (0x00000000)
[Fri Oct 30 17:34:41 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 18:31:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 18:31:18 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:23:16 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:23:22 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 19:54:15 2026] Voltage normalised (0x00000000)
[Fri Oct 30 19:54:17 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 20:33:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 20:33:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:50:50 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 21:51:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:14:14 2026] Voltage normalised (0x00000000)
[Fri Oct 30 22:14:16 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 22:19:21 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:19:27 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:33:58 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 22:34:09 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:05:43 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:05:45 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:18:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:18:52 2026] cp210x ttyUSB0: failed to get comm status: -71
[Fri Oct 30 23:45:00 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:45:02 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:09 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:13 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:47:30 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:47:32 2026] Under-voltage detected! (0x00050005)
[Fri Oct 30 23:57:22 2026] Voltage normalised (0x00000000)
[Fri Oct 30 23:57:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:26:09 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:26:11 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:34:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:34:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 00:52:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 00:59:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 00:59:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 01:23:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 01:23:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:07:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:07:12 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:35:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:35:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 02:46:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 02:47:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:06:39 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:20:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:20:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:46:31 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:46:33 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 03:49:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:49:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 03:56:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 03:56:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:04:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:04:58 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 04:08:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:22 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:08:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:47:32 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 04:53:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 04:54:01 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:07:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:07:22 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:08:01 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:08:03 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:10:58 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:11:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:14:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:14:51 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 05:47:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 05:47:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:00:45 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:00:47 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:18:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:18:53 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:19:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:20:04 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:23:40 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 06:36:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 06:36:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 06:55:18 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 07:29:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 07:29:59 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 07:56:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 07:56:18 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:08:55 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:08:57 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:11:15 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:11:19 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:16:25 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:16:27 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:27:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:27:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:37:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:37:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 09:43:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 09:43:19 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 10:20:44 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:20:55 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:21:07 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:21:11 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:21:13 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:32:16 2026] Voltage normalised (0x00000000)
[Sat Oct 31 10:32:18 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 10:39:01 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 10:51:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 10:51:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 11:17:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 11:17:14 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 11:18:05 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 11:18:16 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 11:29:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 11:29:59 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 11:33:48 2026] Voltage normalised (0x00000000)
[Sat Oct 31 11:33:50 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 11:34:31 2026] Voltage normalised (0x00000000)
[Sat Oct 31 11:34:33 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 11:37:30 2026] Voltage normalised (0x00000000)
[Sat Oct 31 11:37:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 11:54:52 2026] Voltage normalised (0x00000000)
[Sat Oct 31 11:54:54 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 12:00:44 2026] Voltage normalised (0x00000000)
[Sat Oct 31 12:00:46 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 12:14:46 2026] Voltage normalised (0x00000000)
[Sat Oct 31 12:14:48 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 12:19:19 2026] Voltage normalised (0x00000000)
[Sat Oct 31 12:19:21 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 12:22:45 2026] Voltage normalised (0x00000000)
[Sat Oct 31 12:22:49 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 12:29:22 2026] Voltage normalised (0x00000000)
[Sat Oct 31 12:29:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 12:44:41 2026] Voltage normalised (0x00000000)
[Sat Oct 31 12:44:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 12:47:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 12:47:19 2026] Under-voltage detected! (0x00050005)

=================================================
=================================================

DateTime: 26-10-31 14:00:06

-------------------------------------------------

[Sat Oct 31 13:23:34 2026] Booting Linux on physical CPU 0x0
[Sat Oct 31 13:23:34 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Sat Oct 31 13:23:34 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Sat Oct 31 13:23:34 2026] CPU: div instructions available: patching division code
[Sat Oct 31 13:23:34 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Sat Oct 31 13:23:34 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Sat Oct 31 13:23:34 2026] Memory policy: Data cache writealloc
[Sat Oct 31 13:23:34 2026] cma: Reserved 8 MiB at 0x37800000
[Sat Oct 31 13:23:34 2026] On node 0 totalpages: 229376
[Sat Oct 31 13:23:34 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Sat Oct 31 13:23:34 2026]   Normal zone: 2016 pages used for memmap
[Sat Oct 31 13:23:34 2026]   Normal zone: 0 pages reserved
[Sat Oct 31 13:23:34 2026]   Normal zone: 229376 pages, LIFO batch:31
[Sat Oct 31 13:23:34 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Sat Oct 31 13:23:34 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Sat Oct 31 13:23:34 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Sat Oct 31 13:23:34 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Sat Oct 31 13:23:34 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Sat Oct 31 13:23:34 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Sat Oct 31 13:23:34 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Sat Oct 31 13:23:34 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Sat Oct 31 13:23:34 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Sat Oct 31 13:23:34 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Sat Oct 31 13:23:34 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Sat Oct 31 13:23:34 2026] ftrace: allocating 25298 entries in 75 pages
[Sat Oct 31 13:23:34 2026] Hierarchical RCU implementation.
[Sat Oct 31 13:23:34 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Sat Oct 31 13:23:34 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Sat Oct 31 13:23:34 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Sat Oct 31 13:23:34 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Sat Oct 31 13:23:34 2026] Switching to timer-based delay loop, resolution 52ns
[Sat Oct 31 13:23:34 2026] Console: colour dummy device 80x30
[Sat Oct 31 13:23:34 2026] console [tty1] enabled
[Sat Oct 31 13:23:34 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Sat Oct 31 13:23:34 2026] pid_max: default: 32768 minimum: 301
[Sat Oct 31 13:23:34 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sat Oct 31 13:23:34 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sat Oct 31 13:23:34 2026] Disabling memory control group subsystem
[Sat Oct 31 13:23:34 2026] CPU: Testing write buffer coherency: ok
[Sat Oct 31 13:23:34 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Sat Oct 31 13:23:34 2026] Setting up static identity map for 0x100000 - 0x10003c
[Sat Oct 31 13:23:34 2026] Hierarchical SRCU implementation.
[Sat Oct 31 13:23:34 2026] smp: Bringing up secondary CPUs ...
[Sat Oct 31 13:23:34 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Sat Oct 31 13:23:34 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Sat Oct 31 13:23:34 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Sat Oct 31 13:23:34 2026] smp: Brought up 1 node, 4 CPUs
[Sat Oct 31 13:23:34 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Sat Oct 31 13:23:34 2026] CPU: All CPU(s) started in HYP mode.
[Sat Oct 31 13:23:34 2026] CPU: Virtualization extensions available.
[Sat Oct 31 13:23:34 2026] devtmpfs: initialized
[Sat Oct 31 13:23:34 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Sat Oct 31 13:23:34 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Sat Oct 31 13:23:34 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Sat Oct 31 13:23:34 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Sat Oct 31 13:23:34 2026] pinctrl core: initialized pinctrl subsystem
[Sat Oct 31 13:23:34 2026] NET: Registered protocol family 16
[Sat Oct 31 13:23:34 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Sat Oct 31 13:23:34 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Sat Oct 31 13:23:34 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Sat Oct 31 13:23:34 2026] Serial: AMBA PL011 UART driver
[Sat Oct 31 13:23:34 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Sat Oct 31 13:23:34 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Sat Oct 31 13:23:34 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Sat Oct 31 13:23:34 2026] SCSI subsystem initialized
[Sat Oct 31 13:23:34 2026] usbcore: registered new interface driver usbfs
[Sat Oct 31 13:23:34 2026] usbcore: registered new interface driver hub
[Sat Oct 31 13:23:34 2026] usbcore: registered new device driver usb
[Sat Oct 31 13:23:34 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Sat Oct 31 13:23:34 2026] clocksource: Switched to clocksource arch_sys_counter
[Sat Oct 31 13:23:34 2026] VFS: Disk quotas dquot_6.6.0
[Sat Oct 31 13:23:34 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Sat Oct 31 13:23:34 2026] FS-Cache: Loaded
[Sat Oct 31 13:23:34 2026] CacheFiles: Loaded
[Sat Oct 31 13:23:34 2026] NET: Registered protocol family 2
[Sat Oct 31 13:23:34 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Sat Oct 31 13:23:34 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Sat Oct 31 13:23:34 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Sat Oct 31 13:23:34 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Sat Oct 31 13:23:34 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Sat Oct 31 13:23:34 2026] NET: Registered protocol family 1
[Sat Oct 31 13:23:34 2026] RPC: Registered named UNIX socket transport module.
[Sat Oct 31 13:23:34 2026] RPC: Registered udp transport module.
[Sat Oct 31 13:23:34 2026] RPC: Registered tcp transport module.
[Sat Oct 31 13:23:34 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Sat Oct 31 13:23:34 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Sat Oct 31 13:23:34 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Sat Oct 31 13:23:34 2026] FS-Cache: Netfs 'nfs' registered for caching
[Sat Oct 31 13:23:34 2026] NFS: Registering the id_resolver key type
[Sat Oct 31 13:23:34 2026] Key type id_resolver registered
[Sat Oct 31 13:23:34 2026] Key type id_legacy registered
[Sat Oct 31 13:23:34 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Sat Oct 31 13:23:34 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Sat Oct 31 13:23:34 2026] io scheduler noop registered
[Sat Oct 31 13:23:34 2026] io scheduler deadline registered (default)
[Sat Oct 31 13:23:34 2026] io scheduler cfq registered
[Sat Oct 31 13:23:34 2026] io scheduler mq-deadline registered
[Sat Oct 31 13:23:34 2026] io scheduler kyber registered
[Sat Oct 31 13:23:34 2026] BCM2708FB: allocated DMA memory f7910000
[Sat Oct 31 13:23:34 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Sat Oct 31 13:23:34 2026] Console: switching to colour frame buffer device 90x30
[Sat Oct 31 13:23:34 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Sat Oct 31 13:23:34 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Sat Oct 31 13:23:34 2026] vc-sm: Videocore shared memory driver
[Sat Oct 31 13:23:34 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Sat Oct 31 13:23:34 2026] brd: module loaded
[Sat Oct 31 13:23:34 2026] loop: module loaded
[Sat Oct 31 13:23:34 2026] Loading iSCSI transport class v2.0-870.
[Sat Oct 31 13:23:34 2026] libphy: Fixed MDIO Bus: probed
[Sat Oct 31 13:23:34 2026] usbcore: registered new interface driver lan78xx
[Sat Oct 31 13:23:34 2026] usbcore: registered new interface driver smsc95xx
[Sat Oct 31 13:23:34 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Sat Oct 31 13:23:34 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Sat Oct 31 13:23:34 2026] Core Release: 2.80a
[Sat Oct 31 13:23:34 2026] Setting default values for core params
[Sat Oct 31 13:23:34 2026] Finished setting default values for core params
[Sat Oct 31 13:23:34 2026] Using Buffer DMA mode
[Sat Oct 31 13:23:34 2026] Periodic Transfer Interrupt Enhancement - disabled
[Sat Oct 31 13:23:34 2026] Multiprocessor Interrupt Enhancement - disabled
[Sat Oct 31 13:23:34 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Sat Oct 31 13:23:34 2026] Dedicated Tx FIFOs mode
[Sat Oct 31 13:23:34 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Sat Oct 31 13:23:34 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Sat Oct 31 13:23:34 2026] dwc_otg: Microframe scheduler enabled
[Sat Oct 31 13:23:34 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Sat Oct 31 13:23:34 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Sat Oct 31 13:23:34 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Sat Oct 31 13:23:34 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Sat Oct 31 13:23:34 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Sat Oct 31 13:23:34 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Sat Oct 31 13:23:34 2026] Init: Port Power? op_state=1
[Sat Oct 31 13:23:34 2026] Init: Power Port (0)
[Sat Oct 31 13:23:34 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Sat Oct 31 13:23:34 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Sat Oct 31 13:23:34 2026] usb usb1: Product: DWC OTG Controller
[Sat Oct 31 13:23:34 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Sat Oct 31 13:23:34 2026] usb usb1: SerialNumber: 3f980000.usb
[Sat Oct 31 13:23:34 2026] hub 1-0:1.0: USB hub found
[Sat Oct 31 13:23:34 2026] hub 1-0:1.0: 1 port detected
[Sat Oct 31 13:23:34 2026] dwc_otg: FIQ enabled
[Sat Oct 31 13:23:34 2026] dwc_otg: NAK holdoff enabled
[Sat Oct 31 13:23:34 2026] dwc_otg: FIQ split-transaction FSM enabled
[Sat Oct 31 13:23:34 2026] Module dwc_common_port init
[Sat Oct 31 13:23:34 2026] usbcore: registered new interface driver usb-storage
[Sat Oct 31 13:23:34 2026] mousedev: PS/2 mouse device common for all mice
[Sat Oct 31 13:23:34 2026] IR NEC protocol handler initialized
[Sat Oct 31 13:23:34 2026] IR RC5(x/sz) protocol handler initialized
[Sat Oct 31 13:23:34 2026] IR RC6 protocol handler initialized
[Sat Oct 31 13:23:34 2026] IR JVC protocol handler initialized
[Sat Oct 31 13:23:34 2026] IR Sony protocol handler initialized
[Sat Oct 31 13:23:34 2026] IR SANYO protocol handler initialized
[Sat Oct 31 13:23:34 2026] IR Sharp protocol handler initialized
[Sat Oct 31 13:23:34 2026] IR MCE Keyboard/mouse protocol handler initialized
[Sat Oct 31 13:23:34 2026] IR XMP protocol handler initialized
[Sat Oct 31 13:23:34 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Sat Oct 31 13:23:34 2026] bcm2835-cpufreq: min=600000 max=1200000
[Sat Oct 31 13:23:34 2026] sdhci: Secure Digital Host Controller Interface driver
[Sat Oct 31 13:23:34 2026] sdhci: Copyright(c) Pierre Ossman
[Sat Oct 31 13:23:34 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Sat Oct 31 13:23:34 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Sat Oct 31 13:23:34 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Sat Oct 31 13:23:34 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Sat Oct 31 13:23:34 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Sat Oct 31 13:23:34 2026] usbcore: registered new interface driver usbhid
[Sat Oct 31 13:23:34 2026] usbhid: USB HID core driver
[Sat Oct 31 13:23:34 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Sat Oct 31 13:23:34 2026] [vc_sm_connected_init]: start
[Sat Oct 31 13:23:34 2026] [vc_sm_connected_init]: end - returning 0
[Sat Oct 31 13:23:34 2026] Initializing XFRM netlink socket
[Sat Oct 31 13:23:34 2026] NET: Registered protocol family 17
[Sat Oct 31 13:23:34 2026] Key type dns_resolver registered
[Sat Oct 31 13:23:34 2026] Registering SWP/SWPB emulation handler
[Sat Oct 31 13:23:34 2026] registered taskstats version 1
[Sat Oct 31 13:23:34 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Sat Oct 31 13:23:34 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Sat Oct 31 13:23:34 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Sat Oct 31 13:23:34 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Sat Oct 31 13:23:34 2026] sdhost: log_buf @ b7907000 (f7907000)
[Sat Oct 31 13:23:34 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Sat Oct 31 13:23:34 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Sat Oct 31 13:23:34 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Sat Oct 31 13:23:34 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Sat Oct 31 13:23:34 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Sat Oct 31 13:23:34 2026] of_cfs_init
[Sat Oct 31 13:23:34 2026] of_cfs_init: OK
[Sat Oct 31 13:23:34 2026] Waiting for root device /dev/mmcblk0p2...
[Sat Oct 31 13:23:34 2026] random: fast init done
[Sat Oct 31 13:23:34 2026] Indeed it is in host mode hprt0 = 00021501
[Sat Oct 31 13:23:34 2026] mmc1: new high speed SDIO card at address 0001
[Sat Oct 31 13:23:34 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Sat Oct 31 13:23:34 2026] mmc0: new high speed SDHC card at address aaaa
[Sat Oct 31 13:23:34 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Sat Oct 31 13:23:35 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Sat Oct 31 13:23:35 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Sat Oct 31 13:23:35 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Sat Oct 31 13:23:35 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Sat Oct 31 13:23:35 2026] Indeed it is in host mode hprt0 = 00001101
[Sat Oct 31 13:23:35 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Sat Oct 31 13:23:35 2026] EXT4-fs (mmcblk0p2): 11 orphan inodes deleted
[Sat Oct 31 13:23:35 2026] EXT4-fs (mmcblk0p2): recovery complete
[Sat Oct 31 13:23:35 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 13:23:35 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sat Oct 31 13:23:35 2026] devtmpfs: mounted
[Sat Oct 31 13:23:35 2026] Freeing unused kernel memory: 1024K
[Sat Oct 31 13:23:35 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Sat Oct 31 13:23:35 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sat Oct 31 13:23:35 2026] hub 1-1:1.0: USB hub found
[Sat Oct 31 13:23:35 2026] hub 1-1:1.0: 5 ports detected
[Sat Oct 31 13:23:35 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Sat Oct 31 13:23:35 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Sat Oct 31 13:23:35 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sat Oct 31 13:23:35 2026] smsc95xx v1.0.6
[Sat Oct 31 13:23:35 2026] systemd[1]: System time before build time, advancing clock.
[Sat Oct 31 13:23:35 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Sat Oct 31 13:23:35 2026] NET: Registered protocol family 10
[Sat Oct 31 13:23:35 2026] Segment Routing with IPv6
[Sat Oct 31 13:23:35 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Sat Oct 31 13:23:35 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Sat Oct 31 13:23:35 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Sat Oct 31 13:23:36 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Sat Oct 31 13:23:36 2026] systemd[1]: Detected architecture arm.
[Sat Oct 31 13:23:36 2026] systemd[1]: Set hostname to <TM06202302>.
[Sat Oct 31 13:23:36 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Sat Oct 31 13:23:36 2026] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[Sat Oct 31 13:23:36 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Sat Oct 31 13:23:36 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Sat Oct 31 13:23:36 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Sat Oct 31 13:23:36 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Sat Oct 31 13:23:36 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Sat Oct 31 13:23:36 2026] systemd[1]: Listening on Journal Socket (/dev/log).
[Sat Oct 31 13:23:36 2026] systemd[1]: Listening on Syslog Socket.
[Sat Oct 31 13:23:36 2026] systemd[1]: Listening on fsck to fsckd communication Socket.
[Sat Oct 31 13:23:36 2026] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[Sat Oct 31 13:23:36 2026] systemd[1]: Listening on Journal Socket.
[Sat Oct 31 13:23:36 2026] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[Sat Oct 31 13:23:36 2026] systemd[1]: Created slice System Slice.
[Sat Oct 31 13:23:36 2026] i2c /dev entries driver
[Sat Oct 31 13:23:37 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Sat Oct 31 13:23:37 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Sat Oct 31 13:23:37 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Sat Oct 31 13:23:38 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Sat Oct 31 13:23:38 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Sat Oct 31 13:23:38 2026] usbcore: registered new interface driver brcmfmac
[Sat Oct 31 13:23:38 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Sat Oct 31 13:23:38 2026] usbcore: registered new interface driver usbserial
[Sat Oct 31 13:23:38 2026] usbcore: registered new interface driver usbserial_generic
[Sat Oct 31 13:23:38 2026] usbserial: USB Serial support registered for generic
[Sat Oct 31 13:23:38 2026] usbcore: registered new interface driver cp210x
[Sat Oct 31 13:23:38 2026] usbserial: USB Serial support registered for cp210x
[Sat Oct 31 13:23:38 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Sat Oct 31 13:23:38 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Sat Oct 31 13:23:38 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Sat Oct 31 13:23:38 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Sat Oct 31 13:23:38 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Sat Oct 31 13:23:38 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Sat Oct 31 13:23:38 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Sat Oct 31 13:23:38 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Sat Oct 31 13:23:38 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Sat Oct 31 13:23:38 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Sat Oct 31 13:23:39 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 13:23:39 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 13:23:39 2026] systemd-journald[97]: Received request to flush runtime journal from PID 1
[Sat Oct 31 13:23:40 2026] random: crng init done
[Sat Oct 31 13:23:40 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Sat Oct 31 13:23:40 2026] uart-pl011 3f201000.serial: no DMA platform data
[Sat Oct 31 13:23:41 2026] brcmfmac: power management disabled
[Sat Oct 31 13:23:42 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Sat Oct 31 13:23:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 13:23:42 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Sat Oct 31 13:23:43 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Sat Oct 31 13:23:45 2026] NET: Registered protocol family 38
[Sat Oct 31 13:23:46 2026] Bluetooth: Core ver 2.22
[Sat Oct 31 13:23:46 2026] NET: Registered protocol family 31
[Sat Oct 31 13:23:46 2026] Bluetooth: HCI device and connection manager initialized
[Sat Oct 31 13:23:46 2026] Bluetooth: HCI socket layer initialized
[Sat Oct 31 13:23:46 2026] Bluetooth: L2CAP socket layer initialized
[Sat Oct 31 13:23:46 2026] Bluetooth: SCO socket layer initialized
[Sat Oct 31 13:23:46 2026] Bluetooth: HCI UART driver ver 2.3
[Sat Oct 31 13:23:46 2026] Bluetooth: HCI UART protocol H4 registered
[Sat Oct 31 13:23:46 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Sat Oct 31 13:23:46 2026] Bluetooth: HCI UART protocol Broadcom registered
[Sat Oct 31 13:23:46 2026] EXT4-fs (dm-0): recovery complete
[Sat Oct 31 13:23:46 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 13:23:47 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Sat Oct 31 13:23:47 2026] Bluetooth: BNEP filters: protocol multicast
[Sat Oct 31 13:23:47 2026] Bluetooth: BNEP socket layer initialized
[Sat Oct 31 13:23:47 2026] Bluetooth: RFCOMM TTY layer initialized
[Sat Oct 31 13:23:47 2026] Bluetooth: RFCOMM socket layer initialized
[Sat Oct 31 13:23:47 2026] Bluetooth: RFCOMM ver 1.11
[Sat Oct 31 13:23:48 2026] fuse init (API version 7.26)
[Sat Oct 31 13:23:50 2026] usb 1-1.2: USB disconnect, device number 4
[Sat Oct 31 13:23:50 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Sat Oct 31 13:23:50 2026] cp210x 1-1.2:1.0: device disconnected
[Sat Oct 31 13:23:50 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Sat Oct 31 13:23:50 2026] cp210x 1-1.2:1.1: device disconnected
[Sat Oct 31 13:23:50 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Sat Oct 31 13:23:50 2026] cp210x 1-1.2:1.2: device disconnected
[Sat Oct 31 13:23:50 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Sat Oct 31 13:23:50 2026] cp210x 1-1.2:1.3: device disconnected
[Sat Oct 31 13:23:51 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Sat Oct 31 13:23:52 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Sat Oct 31 13:23:52 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Sat Oct 31 13:23:52 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Sat Oct 31 13:23:52 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Sat Oct 31 13:23:52 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Sat Oct 31 13:23:52 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Sat Oct 31 13:23:52 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Sat Oct 31 13:23:52 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Sat Oct 31 13:23:52 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Sat Oct 31 13:23:52 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Sat Oct 31 13:23:52 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Sat Oct 31 13:23:52 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Sat Oct 31 13:23:52 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Sat Oct 31 13:24:36 2026] Voltage normalised (0x00000000)
[Sat Oct 31 13:24:38 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 13:29:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 13:29:21 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 13:29:31 2026] Voltage normalised (0x00000000)
[Sat Oct 31 13:29:33 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 13:29:42 2026] Voltage normalised (0x00000000)
[Sat Oct 31 13:29:46 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 13:34:27 2026] Voltage normalised (0x00000000)
[Sat Oct 31 13:34:29 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 13:37:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 13:37:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 13:39:45 2026] Voltage normalised (0x00000000)
[Sat Oct 31 13:39:47 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 13:40:31 2026] Voltage normalised (0x00000000)
[Sat Oct 31 13:40:33 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 13:42:02 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 13:43:38 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 13:43:38 2026] Voltage normalised (0x00000000)
[Sat Oct 31 13:44:28 2026] Voltage normalised (0x00000000)
[Sat Oct 31 13:45:16 2026] Voltage normalised (0x00000000)
[Sat Oct 31 13:45:18 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 13:45:18 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 13:49:13 2026] Voltage normalised (0x00000000)
[Sat Oct 31 13:49:17 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 13:49:58 2026] Voltage normalised (0x00000000)
[Sat Oct 31 13:50:03 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 13:50:25 2026] Voltage normalised (0x00000000)
[Sat Oct 31 13:50:28 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 13:51:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 13:52:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 13:59:10 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 13:59:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 13:59:14 2026] Under-voltage detected! (0x00050005)

=================================================
=================================================

DateTime: 26-10-31 15:00:06

-------------------------------------------------

[Sat Oct 31 14:50:17 2026] Booting Linux on physical CPU 0x0
[Sat Oct 31 14:50:17 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Sat Oct 31 14:50:17 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Sat Oct 31 14:50:17 2026] CPU: div instructions available: patching division code
[Sat Oct 31 14:50:17 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Sat Oct 31 14:50:17 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Sat Oct 31 14:50:17 2026] Memory policy: Data cache writealloc
[Sat Oct 31 14:50:17 2026] cma: Reserved 8 MiB at 0x37800000
[Sat Oct 31 14:50:17 2026] On node 0 totalpages: 229376
[Sat Oct 31 14:50:17 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Sat Oct 31 14:50:17 2026]   Normal zone: 2016 pages used for memmap
[Sat Oct 31 14:50:17 2026]   Normal zone: 0 pages reserved
[Sat Oct 31 14:50:17 2026]   Normal zone: 229376 pages, LIFO batch:31
[Sat Oct 31 14:50:17 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Sat Oct 31 14:50:17 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Sat Oct 31 14:50:17 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Sat Oct 31 14:50:17 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Sat Oct 31 14:50:17 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Sat Oct 31 14:50:17 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Sat Oct 31 14:50:17 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Sat Oct 31 14:50:17 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Sat Oct 31 14:50:17 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Sat Oct 31 14:50:17 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Sat Oct 31 14:50:17 2026] ftrace: allocating 25298 entries in 75 pages
[Sat Oct 31 14:50:17 2026] Hierarchical RCU implementation.
[Sat Oct 31 14:50:17 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Sat Oct 31 14:50:17 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Sat Oct 31 14:50:17 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Sat Oct 31 14:50:17 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Sat Oct 31 14:50:17 2026] Switching to timer-based delay loop, resolution 52ns
[Sat Oct 31 14:50:17 2026] Console: colour dummy device 80x30
[Sat Oct 31 14:50:17 2026] console [tty1] enabled
[Sat Oct 31 14:50:17 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Sat Oct 31 14:50:17 2026] pid_max: default: 32768 minimum: 301
[Sat Oct 31 14:50:17 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sat Oct 31 14:50:17 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sat Oct 31 14:50:17 2026] Disabling memory control group subsystem
[Sat Oct 31 14:50:17 2026] CPU: Testing write buffer coherency: ok
[Sat Oct 31 14:50:17 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Sat Oct 31 14:50:17 2026] Setting up static identity map for 0x100000 - 0x10003c
[Sat Oct 31 14:50:17 2026] Hierarchical SRCU implementation.
[Sat Oct 31 14:50:17 2026] smp: Bringing up secondary CPUs ...
[Sat Oct 31 14:50:17 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Sat Oct 31 14:50:17 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Sat Oct 31 14:50:17 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Sat Oct 31 14:50:17 2026] smp: Brought up 1 node, 4 CPUs
[Sat Oct 31 14:50:17 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Sat Oct 31 14:50:17 2026] CPU: All CPU(s) started in HYP mode.
[Sat Oct 31 14:50:17 2026] CPU: Virtualization extensions available.
[Sat Oct 31 14:50:17 2026] devtmpfs: initialized
[Sat Oct 31 14:50:17 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Sat Oct 31 14:50:17 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Sat Oct 31 14:50:17 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Sat Oct 31 14:50:17 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Sat Oct 31 14:50:17 2026] pinctrl core: initialized pinctrl subsystem
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 16
[Sat Oct 31 14:50:17 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Sat Oct 31 14:50:17 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Sat Oct 31 14:50:17 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Sat Oct 31 14:50:17 2026] Serial: AMBA PL011 UART driver
[Sat Oct 31 14:50:17 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Sat Oct 31 14:50:17 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Sat Oct 31 14:50:17 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Sat Oct 31 14:50:17 2026] SCSI subsystem initialized
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usbfs
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver hub
[Sat Oct 31 14:50:17 2026] usbcore: registered new device driver usb
[Sat Oct 31 14:50:17 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Sat Oct 31 14:50:17 2026] clocksource: Switched to clocksource arch_sys_counter
[Sat Oct 31 14:50:17 2026] VFS: Disk quotas dquot_6.6.0
[Sat Oct 31 14:50:17 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Sat Oct 31 14:50:17 2026] FS-Cache: Loaded
[Sat Oct 31 14:50:17 2026] CacheFiles: Loaded
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 2
[Sat Oct 31 14:50:17 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Sat Oct 31 14:50:17 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Sat Oct 31 14:50:17 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Sat Oct 31 14:50:17 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 1
[Sat Oct 31 14:50:17 2026] RPC: Registered named UNIX socket transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered udp transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered tcp transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Sat Oct 31 14:50:17 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Sat Oct 31 14:50:17 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Sat Oct 31 14:50:17 2026] FS-Cache: Netfs 'nfs' registered for caching
[Sat Oct 31 14:50:17 2026] NFS: Registering the id_resolver key type
[Sat Oct 31 14:50:17 2026] Key type id_resolver registered
[Sat Oct 31 14:50:17 2026] Key type id_legacy registered
[Sat Oct 31 14:50:17 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Sat Oct 31 14:50:17 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Sat Oct 31 14:50:17 2026] io scheduler noop registered
[Sat Oct 31 14:50:17 2026] io scheduler deadline registered (default)
[Sat Oct 31 14:50:17 2026] io scheduler cfq registered
[Sat Oct 31 14:50:17 2026] io scheduler mq-deadline registered
[Sat Oct 31 14:50:17 2026] io scheduler kyber registered
[Sat Oct 31 14:50:17 2026] BCM2708FB: allocated DMA memory f7910000
[Sat Oct 31 14:50:17 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Sat Oct 31 14:50:17 2026] Console: switching to colour frame buffer device 90x30
[Sat Oct 31 14:50:17 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Sat Oct 31 14:50:17 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Sat Oct 31 14:50:17 2026] vc-sm: Videocore shared memory driver
[Sat Oct 31 14:50:17 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Sat Oct 31 14:50:17 2026] brd: module loaded
[Sat Oct 31 14:50:17 2026] loop: module loaded
[Sat Oct 31 14:50:17 2026] Loading iSCSI transport class v2.0-870.
[Sat Oct 31 14:50:17 2026] libphy: Fixed MDIO Bus: probed
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver lan78xx
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver smsc95xx
[Sat Oct 31 14:50:17 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Sat Oct 31 14:50:17 2026] Core Release: 2.80a
[Sat Oct 31 14:50:17 2026] Setting default values for core params
[Sat Oct 31 14:50:17 2026] Finished setting default values for core params
[Sat Oct 31 14:50:17 2026] Using Buffer DMA mode
[Sat Oct 31 14:50:17 2026] Periodic Transfer Interrupt Enhancement - disabled
[Sat Oct 31 14:50:17 2026] Multiprocessor Interrupt Enhancement - disabled
[Sat Oct 31 14:50:17 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Sat Oct 31 14:50:17 2026] Dedicated Tx FIFOs mode
[Sat Oct 31 14:50:17 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Sat Oct 31 14:50:17 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: Microframe scheduler enabled
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Sat Oct 31 14:50:17 2026] Init: Port Power? op_state=1
[Sat Oct 31 14:50:17 2026] Init: Power Port (0)
[Sat Oct 31 14:50:17 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Sat Oct 31 14:50:17 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Sat Oct 31 14:50:17 2026] usb usb1: Product: DWC OTG Controller
[Sat Oct 31 14:50:17 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Sat Oct 31 14:50:17 2026] usb usb1: SerialNumber: 3f980000.usb
[Sat Oct 31 14:50:17 2026] hub 1-0:1.0: USB hub found
[Sat Oct 31 14:50:17 2026] hub 1-0:1.0: 1 port detected
[Sat Oct 31 14:50:17 2026] dwc_otg: FIQ enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: NAK holdoff enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: FIQ split-transaction FSM enabled
[Sat Oct 31 14:50:17 2026] Module dwc_common_port init
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usb-storage
[Sat Oct 31 14:50:17 2026] mousedev: PS/2 mouse device common for all mice
[Sat Oct 31 14:50:17 2026] IR NEC protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR RC5(x/sz) protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR RC6 protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR JVC protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR Sony protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR SANYO protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR Sharp protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR MCE Keyboard/mouse protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR XMP protocol handler initialized
[Sat Oct 31 14:50:17 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Sat Oct 31 14:50:17 2026] bcm2835-cpufreq: min=600000 max=1200000
[Sat Oct 31 14:50:17 2026] sdhci: Secure Digital Host Controller Interface driver
[Sat Oct 31 14:50:17 2026] sdhci: Copyright(c) Pierre Ossman
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Sat Oct 31 14:50:17 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Sat Oct 31 14:50:17 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Sat Oct 31 14:50:17 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Sat Oct 31 14:50:17 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usbhid
[Sat Oct 31 14:50:17 2026] usbhid: USB HID core driver
[Sat Oct 31 14:50:17 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Sat Oct 31 14:50:17 2026] [vc_sm_connected_init]: start
[Sat Oct 31 14:50:17 2026] [vc_sm_connected_init]: end - returning 0
[Sat Oct 31 14:50:17 2026] Initializing XFRM netlink socket
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 17
[Sat Oct 31 14:50:17 2026] Key type dns_resolver registered
[Sat Oct 31 14:50:17 2026] Registering SWP/SWPB emulation handler
[Sat Oct 31 14:50:17 2026] registered taskstats version 1
[Sat Oct 31 14:50:17 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Sat Oct 31 14:50:17 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Sat Oct 31 14:50:17 2026] sdhost: log_buf @ b7907000 (f7907000)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Sat Oct 31 14:50:17 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Sat Oct 31 14:50:17 2026] of_cfs_init
[Sat Oct 31 14:50:17 2026] of_cfs_init: OK
[Sat Oct 31 14:50:17 2026] Waiting for root device /dev/mmcblk0p2...
[Sat Oct 31 14:50:17 2026] random: fast init done
[Sat Oct 31 14:50:17 2026] Indeed it is in host mode hprt0 = 00021501
[Sat Oct 31 14:50:17 2026] mmc1: new high speed SDIO card at address 0001
[Sat Oct 31 14:50:17 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Sat Oct 31 14:50:17 2026] mmc0: new high speed SDHC card at address aaaa
[Sat Oct 31 14:50:17 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Sat Oct 31 14:50:17 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Sat Oct 31 14:50:17 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Sat Oct 31 14:50:17 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Sat Oct 31 14:50:18 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Sat Oct 31 14:50:18 2026] Indeed it is in host mode hprt0 = 00001101
[Sat Oct 31 14:50:18 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Sat Oct 31 14:50:18 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sat Oct 31 14:50:18 2026] hub 1-1:1.0: USB hub found
[Sat Oct 31 14:50:18 2026] hub 1-1:1.0: 5 ports detected
[Sat Oct 31 14:50:18 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Sat Oct 31 14:50:18 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Sat Oct 31 14:50:18 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sat Oct 31 14:50:18 2026] smsc95xx v1.0.6
[Sat Oct 31 14:50:18 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Sat Oct 31 14:50:18 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): 13 orphan inodes deleted
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): recovery complete
[Sat Oct 31 14:50:19 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Sat Oct 31 14:50:19 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Sat Oct 31 14:50:19 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Sat Oct 31 14:50:19 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Sat Oct 31 14:50:19 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:19 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sat Oct 31 14:50:19 2026] devtmpfs: mounted
[Sat Oct 31 14:50:19 2026] Freeing unused kernel memory: 1024K
[Sat Oct 31 14:50:19 2026] systemd[1]: System time before build time, advancing clock.
[Sat Oct 31 14:50:19 2026] NET: Registered protocol family 10
[Sat Oct 31 14:50:19 2026] Segment Routing with IPv6
[Sat Oct 31 14:50:19 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Sat Oct 31 14:50:19 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:19 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Sat Oct 31 14:50:19 2026] systemd[1]: Detected architecture arm.
[Sat Oct 31 14:50:19 2026] systemd[1]: Set hostname to <TM06202302>.
[Sat Oct 31 14:50:19 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:19 2026] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:20 2026] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Journal Socket (/dev/log).
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on udev Kernel Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on udev Control Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on fsck to fsckd communication Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Journal Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Syslog Socket.
[Sat Oct 31 14:50:20 2026] i2c /dev entries driver
[Sat Oct 31 14:50:21 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Sat Oct 31 14:50:21 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Sat Oct 31 14:50:21 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Sat Oct 31 14:50:22 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver brcmfmac
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver usbserial
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver usbserial_generic
[Sat Oct 31 14:50:22 2026] usbserial: USB Serial support registered for generic
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver cp210x
[Sat Oct 31 14:50:22 2026] usbserial: USB Serial support registered for cp210x
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Sat Oct 31 14:50:22 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Sat Oct 31 14:50:22 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:23 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:23 2026] systemd-journald[92]: Received request to flush runtime journal from PID 1
[Sat Oct 31 14:50:23 2026] random: crng init done
[Sat Oct 31 14:50:23 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Sat Oct 31 14:50:24 2026] uart-pl011 3f201000.serial: no DMA platform data
[Sat Oct 31 14:50:25 2026] brcmfmac: power management disabled
[Sat Oct 31 14:50:25 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Sat Oct 31 14:50:26 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Sat Oct 31 14:50:26 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Sat Oct 31 14:50:27 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:50:30 2026] NET: Registered protocol family 38
[Sat Oct 31 14:50:30 2026] Bluetooth: Core ver 2.22
[Sat Oct 31 14:50:30 2026] NET: Registered protocol family 31
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI device and connection manager initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: L2CAP socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: SCO socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART driver ver 2.3
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol H4 registered
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol Broadcom registered
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP filters: protocol multicast
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM TTY layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM ver 1.11
[Sat Oct 31 14:50:31 2026] EXT4-fs (dm-0): recovery complete
[Sat Oct 31 14:50:31 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:32 2026] fuse init (API version 7.26)
[Sat Oct 31 14:50:35 2026] usb 1-1.2: USB disconnect, device number 4
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.0: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.1: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.2: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.3: device disconnected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Sat Oct 31 14:50:37 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Sat Oct 31 14:50:37 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Sat Oct 31 14:50:37 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Sat Oct 31 14:50:37 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Sat Oct 31 14:50:37 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Sat Oct 31 14:54:22 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:54:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:55:51 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:55:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:58:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:58:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:58:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:59:57 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 14:59:57 2026] Voltage normalised (0x00000000)

=================================================
=================================================

DateTime: 26-10-31 16:00:05

-------------------------------------------------

[Sat Oct 31 14:50:17 2026] Booting Linux on physical CPU 0x0
[Sat Oct 31 14:50:17 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Sat Oct 31 14:50:17 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Sat Oct 31 14:50:17 2026] CPU: div instructions available: patching division code
[Sat Oct 31 14:50:17 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Sat Oct 31 14:50:17 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Sat Oct 31 14:50:17 2026] Memory policy: Data cache writealloc
[Sat Oct 31 14:50:17 2026] cma: Reserved 8 MiB at 0x37800000
[Sat Oct 31 14:50:17 2026] On node 0 totalpages: 229376
[Sat Oct 31 14:50:17 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Sat Oct 31 14:50:17 2026]   Normal zone: 2016 pages used for memmap
[Sat Oct 31 14:50:17 2026]   Normal zone: 0 pages reserved
[Sat Oct 31 14:50:17 2026]   Normal zone: 229376 pages, LIFO batch:31
[Sat Oct 31 14:50:17 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Sat Oct 31 14:50:17 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Sat Oct 31 14:50:17 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Sat Oct 31 14:50:17 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Sat Oct 31 14:50:17 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Sat Oct 31 14:50:17 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Sat Oct 31 14:50:17 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Sat Oct 31 14:50:17 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Sat Oct 31 14:50:17 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Sat Oct 31 14:50:17 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Sat Oct 31 14:50:17 2026] ftrace: allocating 25298 entries in 75 pages
[Sat Oct 31 14:50:17 2026] Hierarchical RCU implementation.
[Sat Oct 31 14:50:17 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Sat Oct 31 14:50:17 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Sat Oct 31 14:50:17 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Sat Oct 31 14:50:17 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Sat Oct 31 14:50:17 2026] Switching to timer-based delay loop, resolution 52ns
[Sat Oct 31 14:50:17 2026] Console: colour dummy device 80x30
[Sat Oct 31 14:50:17 2026] console [tty1] enabled
[Sat Oct 31 14:50:17 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Sat Oct 31 14:50:17 2026] pid_max: default: 32768 minimum: 301
[Sat Oct 31 14:50:17 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sat Oct 31 14:50:17 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sat Oct 31 14:50:17 2026] Disabling memory control group subsystem
[Sat Oct 31 14:50:17 2026] CPU: Testing write buffer coherency: ok
[Sat Oct 31 14:50:17 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Sat Oct 31 14:50:17 2026] Setting up static identity map for 0x100000 - 0x10003c
[Sat Oct 31 14:50:17 2026] Hierarchical SRCU implementation.
[Sat Oct 31 14:50:17 2026] smp: Bringing up secondary CPUs ...
[Sat Oct 31 14:50:17 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Sat Oct 31 14:50:17 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Sat Oct 31 14:50:17 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Sat Oct 31 14:50:17 2026] smp: Brought up 1 node, 4 CPUs
[Sat Oct 31 14:50:17 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Sat Oct 31 14:50:17 2026] CPU: All CPU(s) started in HYP mode.
[Sat Oct 31 14:50:17 2026] CPU: Virtualization extensions available.
[Sat Oct 31 14:50:17 2026] devtmpfs: initialized
[Sat Oct 31 14:50:17 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Sat Oct 31 14:50:17 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Sat Oct 31 14:50:17 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Sat Oct 31 14:50:17 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Sat Oct 31 14:50:17 2026] pinctrl core: initialized pinctrl subsystem
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 16
[Sat Oct 31 14:50:17 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Sat Oct 31 14:50:17 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Sat Oct 31 14:50:17 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Sat Oct 31 14:50:17 2026] Serial: AMBA PL011 UART driver
[Sat Oct 31 14:50:17 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Sat Oct 31 14:50:17 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Sat Oct 31 14:50:17 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Sat Oct 31 14:50:17 2026] SCSI subsystem initialized
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usbfs
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver hub
[Sat Oct 31 14:50:17 2026] usbcore: registered new device driver usb
[Sat Oct 31 14:50:17 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Sat Oct 31 14:50:17 2026] clocksource: Switched to clocksource arch_sys_counter
[Sat Oct 31 14:50:17 2026] VFS: Disk quotas dquot_6.6.0
[Sat Oct 31 14:50:17 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Sat Oct 31 14:50:17 2026] FS-Cache: Loaded
[Sat Oct 31 14:50:17 2026] CacheFiles: Loaded
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 2
[Sat Oct 31 14:50:17 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Sat Oct 31 14:50:17 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Sat Oct 31 14:50:17 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Sat Oct 31 14:50:17 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 1
[Sat Oct 31 14:50:17 2026] RPC: Registered named UNIX socket transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered udp transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered tcp transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Sat Oct 31 14:50:17 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Sat Oct 31 14:50:17 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Sat Oct 31 14:50:17 2026] FS-Cache: Netfs 'nfs' registered for caching
[Sat Oct 31 14:50:17 2026] NFS: Registering the id_resolver key type
[Sat Oct 31 14:50:17 2026] Key type id_resolver registered
[Sat Oct 31 14:50:17 2026] Key type id_legacy registered
[Sat Oct 31 14:50:17 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Sat Oct 31 14:50:17 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Sat Oct 31 14:50:17 2026] io scheduler noop registered
[Sat Oct 31 14:50:17 2026] io scheduler deadline registered (default)
[Sat Oct 31 14:50:17 2026] io scheduler cfq registered
[Sat Oct 31 14:50:17 2026] io scheduler mq-deadline registered
[Sat Oct 31 14:50:17 2026] io scheduler kyber registered
[Sat Oct 31 14:50:17 2026] BCM2708FB: allocated DMA memory f7910000
[Sat Oct 31 14:50:17 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Sat Oct 31 14:50:17 2026] Console: switching to colour frame buffer device 90x30
[Sat Oct 31 14:50:17 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Sat Oct 31 14:50:17 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Sat Oct 31 14:50:17 2026] vc-sm: Videocore shared memory driver
[Sat Oct 31 14:50:17 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Sat Oct 31 14:50:17 2026] brd: module loaded
[Sat Oct 31 14:50:17 2026] loop: module loaded
[Sat Oct 31 14:50:17 2026] Loading iSCSI transport class v2.0-870.
[Sat Oct 31 14:50:17 2026] libphy: Fixed MDIO Bus: probed
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver lan78xx
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver smsc95xx
[Sat Oct 31 14:50:17 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Sat Oct 31 14:50:17 2026] Core Release: 2.80a
[Sat Oct 31 14:50:17 2026] Setting default values for core params
[Sat Oct 31 14:50:17 2026] Finished setting default values for core params
[Sat Oct 31 14:50:17 2026] Using Buffer DMA mode
[Sat Oct 31 14:50:17 2026] Periodic Transfer Interrupt Enhancement - disabled
[Sat Oct 31 14:50:17 2026] Multiprocessor Interrupt Enhancement - disabled
[Sat Oct 31 14:50:17 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Sat Oct 31 14:50:17 2026] Dedicated Tx FIFOs mode
[Sat Oct 31 14:50:17 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Sat Oct 31 14:50:17 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: Microframe scheduler enabled
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Sat Oct 31 14:50:17 2026] Init: Port Power? op_state=1
[Sat Oct 31 14:50:17 2026] Init: Power Port (0)
[Sat Oct 31 14:50:17 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Sat Oct 31 14:50:17 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Sat Oct 31 14:50:17 2026] usb usb1: Product: DWC OTG Controller
[Sat Oct 31 14:50:17 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Sat Oct 31 14:50:17 2026] usb usb1: SerialNumber: 3f980000.usb
[Sat Oct 31 14:50:17 2026] hub 1-0:1.0: USB hub found
[Sat Oct 31 14:50:17 2026] hub 1-0:1.0: 1 port detected
[Sat Oct 31 14:50:17 2026] dwc_otg: FIQ enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: NAK holdoff enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: FIQ split-transaction FSM enabled
[Sat Oct 31 14:50:17 2026] Module dwc_common_port init
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usb-storage
[Sat Oct 31 14:50:17 2026] mousedev: PS/2 mouse device common for all mice
[Sat Oct 31 14:50:17 2026] IR NEC protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR RC5(x/sz) protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR RC6 protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR JVC protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR Sony protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR SANYO protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR Sharp protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR MCE Keyboard/mouse protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR XMP protocol handler initialized
[Sat Oct 31 14:50:17 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Sat Oct 31 14:50:17 2026] bcm2835-cpufreq: min=600000 max=1200000
[Sat Oct 31 14:50:17 2026] sdhci: Secure Digital Host Controller Interface driver
[Sat Oct 31 14:50:17 2026] sdhci: Copyright(c) Pierre Ossman
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Sat Oct 31 14:50:17 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Sat Oct 31 14:50:17 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Sat Oct 31 14:50:17 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Sat Oct 31 14:50:17 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usbhid
[Sat Oct 31 14:50:17 2026] usbhid: USB HID core driver
[Sat Oct 31 14:50:17 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Sat Oct 31 14:50:17 2026] [vc_sm_connected_init]: start
[Sat Oct 31 14:50:17 2026] [vc_sm_connected_init]: end - returning 0
[Sat Oct 31 14:50:17 2026] Initializing XFRM netlink socket
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 17
[Sat Oct 31 14:50:17 2026] Key type dns_resolver registered
[Sat Oct 31 14:50:17 2026] Registering SWP/SWPB emulation handler
[Sat Oct 31 14:50:17 2026] registered taskstats version 1
[Sat Oct 31 14:50:17 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Sat Oct 31 14:50:17 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Sat Oct 31 14:50:17 2026] sdhost: log_buf @ b7907000 (f7907000)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Sat Oct 31 14:50:17 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Sat Oct 31 14:50:17 2026] of_cfs_init
[Sat Oct 31 14:50:17 2026] of_cfs_init: OK
[Sat Oct 31 14:50:17 2026] Waiting for root device /dev/mmcblk0p2...
[Sat Oct 31 14:50:17 2026] random: fast init done
[Sat Oct 31 14:50:17 2026] Indeed it is in host mode hprt0 = 00021501
[Sat Oct 31 14:50:17 2026] mmc1: new high speed SDIO card at address 0001
[Sat Oct 31 14:50:17 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Sat Oct 31 14:50:17 2026] mmc0: new high speed SDHC card at address aaaa
[Sat Oct 31 14:50:17 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Sat Oct 31 14:50:17 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Sat Oct 31 14:50:17 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Sat Oct 31 14:50:17 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Sat Oct 31 14:50:18 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Sat Oct 31 14:50:18 2026] Indeed it is in host mode hprt0 = 00001101
[Sat Oct 31 14:50:18 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Sat Oct 31 14:50:18 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sat Oct 31 14:50:18 2026] hub 1-1:1.0: USB hub found
[Sat Oct 31 14:50:18 2026] hub 1-1:1.0: 5 ports detected
[Sat Oct 31 14:50:18 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Sat Oct 31 14:50:18 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Sat Oct 31 14:50:18 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sat Oct 31 14:50:18 2026] smsc95xx v1.0.6
[Sat Oct 31 14:50:18 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Sat Oct 31 14:50:18 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): 13 orphan inodes deleted
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): recovery complete
[Sat Oct 31 14:50:19 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Sat Oct 31 14:50:19 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Sat Oct 31 14:50:19 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Sat Oct 31 14:50:19 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Sat Oct 31 14:50:19 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:19 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sat Oct 31 14:50:19 2026] devtmpfs: mounted
[Sat Oct 31 14:50:19 2026] Freeing unused kernel memory: 1024K
[Sat Oct 31 14:50:19 2026] systemd[1]: System time before build time, advancing clock.
[Sat Oct 31 14:50:19 2026] NET: Registered protocol family 10
[Sat Oct 31 14:50:19 2026] Segment Routing with IPv6
[Sat Oct 31 14:50:19 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Sat Oct 31 14:50:19 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:19 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Sat Oct 31 14:50:19 2026] systemd[1]: Detected architecture arm.
[Sat Oct 31 14:50:19 2026] systemd[1]: Set hostname to <TM06202302>.
[Sat Oct 31 14:50:19 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:19 2026] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:20 2026] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Journal Socket (/dev/log).
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on udev Kernel Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on udev Control Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on fsck to fsckd communication Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Journal Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Syslog Socket.
[Sat Oct 31 14:50:20 2026] i2c /dev entries driver
[Sat Oct 31 14:50:21 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Sat Oct 31 14:50:21 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Sat Oct 31 14:50:21 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Sat Oct 31 14:50:22 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver brcmfmac
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver usbserial
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver usbserial_generic
[Sat Oct 31 14:50:22 2026] usbserial: USB Serial support registered for generic
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver cp210x
[Sat Oct 31 14:50:22 2026] usbserial: USB Serial support registered for cp210x
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Sat Oct 31 14:50:22 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Sat Oct 31 14:50:22 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:23 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:23 2026] systemd-journald[92]: Received request to flush runtime journal from PID 1
[Sat Oct 31 14:50:23 2026] random: crng init done
[Sat Oct 31 14:50:23 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Sat Oct 31 14:50:24 2026] uart-pl011 3f201000.serial: no DMA platform data
[Sat Oct 31 14:50:25 2026] brcmfmac: power management disabled
[Sat Oct 31 14:50:25 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Sat Oct 31 14:50:26 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Sat Oct 31 14:50:26 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Sat Oct 31 14:50:27 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:50:30 2026] NET: Registered protocol family 38
[Sat Oct 31 14:50:30 2026] Bluetooth: Core ver 2.22
[Sat Oct 31 14:50:30 2026] NET: Registered protocol family 31
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI device and connection manager initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: L2CAP socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: SCO socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART driver ver 2.3
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol H4 registered
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol Broadcom registered
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP filters: protocol multicast
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM TTY layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM ver 1.11
[Sat Oct 31 14:50:31 2026] EXT4-fs (dm-0): recovery complete
[Sat Oct 31 14:50:31 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:32 2026] fuse init (API version 7.26)
[Sat Oct 31 14:50:35 2026] usb 1-1.2: USB disconnect, device number 4
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.0: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.1: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.2: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.3: device disconnected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Sat Oct 31 14:50:37 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Sat Oct 31 14:50:37 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Sat Oct 31 14:50:37 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Sat Oct 31 14:50:37 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Sat Oct 31 14:50:37 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Sat Oct 31 14:54:22 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:54:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:55:51 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:55:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:58:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:58:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:58:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:59:57 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 14:59:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:05:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:05:13 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 15:05:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:05:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:05:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:06:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:06:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:10:17 2026] rpi_firmware_get_throttled: 4 callbacks suppressed
[Sat Oct 31 15:10:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:10:19 2026] rpi_firmware_get_throttled: 4 callbacks suppressed
[Sat Oct 31 15:10:19 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:11:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:11:59 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:12:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:12:44 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:17:48 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 15:17:48 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:17:52 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 15:17:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:19:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:19:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:24:38 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:24:40 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:25:13 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:25:15 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:26:28 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:26:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:30:40 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:30:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:30:42 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:30:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:30:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:31:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:31:23 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:31:25 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:39:43 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:39:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:39:45 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:39:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:40:14 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:40:16 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:40:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:41:02 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:48:18 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:48:18 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:48:21 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:48:21 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:50:13 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:50:15 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:50:52 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:50:54 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:54:31 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 15:54:31 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:54:33 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 15:54:33 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:54:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:55:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:55:19 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:55:25 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:59:59 2026] rpi_firmware_get_throttled: 7 callbacks suppressed
[Sat Oct 31 15:59:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:00:01 2026] rpi_firmware_get_throttled: 7 callbacks suppressed
[Sat Oct 31 16:00:01 2026] Under-voltage detected! (0x00050005)

=================================================
=================================================

DateTime: 26-10-31 17:00:04

-------------------------------------------------

[Sat Oct 31 14:50:17 2026] Booting Linux on physical CPU 0x0
[Sat Oct 31 14:50:17 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Sat Oct 31 14:50:17 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Sat Oct 31 14:50:17 2026] CPU: div instructions available: patching division code
[Sat Oct 31 14:50:17 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Sat Oct 31 14:50:17 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Sat Oct 31 14:50:17 2026] Memory policy: Data cache writealloc
[Sat Oct 31 14:50:17 2026] cma: Reserved 8 MiB at 0x37800000
[Sat Oct 31 14:50:17 2026] On node 0 totalpages: 229376
[Sat Oct 31 14:50:17 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Sat Oct 31 14:50:17 2026]   Normal zone: 2016 pages used for memmap
[Sat Oct 31 14:50:17 2026]   Normal zone: 0 pages reserved
[Sat Oct 31 14:50:17 2026]   Normal zone: 229376 pages, LIFO batch:31
[Sat Oct 31 14:50:17 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Sat Oct 31 14:50:17 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Sat Oct 31 14:50:17 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Sat Oct 31 14:50:17 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Sat Oct 31 14:50:17 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Sat Oct 31 14:50:17 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Sat Oct 31 14:50:17 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Sat Oct 31 14:50:17 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Sat Oct 31 14:50:17 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Sat Oct 31 14:50:17 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Sat Oct 31 14:50:17 2026] ftrace: allocating 25298 entries in 75 pages
[Sat Oct 31 14:50:17 2026] Hierarchical RCU implementation.
[Sat Oct 31 14:50:17 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Sat Oct 31 14:50:17 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Sat Oct 31 14:50:17 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Sat Oct 31 14:50:17 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Sat Oct 31 14:50:17 2026] Switching to timer-based delay loop, resolution 52ns
[Sat Oct 31 14:50:17 2026] Console: colour dummy device 80x30
[Sat Oct 31 14:50:17 2026] console [tty1] enabled
[Sat Oct 31 14:50:17 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Sat Oct 31 14:50:17 2026] pid_max: default: 32768 minimum: 301
[Sat Oct 31 14:50:17 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sat Oct 31 14:50:17 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sat Oct 31 14:50:17 2026] Disabling memory control group subsystem
[Sat Oct 31 14:50:17 2026] CPU: Testing write buffer coherency: ok
[Sat Oct 31 14:50:17 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Sat Oct 31 14:50:17 2026] Setting up static identity map for 0x100000 - 0x10003c
[Sat Oct 31 14:50:17 2026] Hierarchical SRCU implementation.
[Sat Oct 31 14:50:17 2026] smp: Bringing up secondary CPUs ...
[Sat Oct 31 14:50:17 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Sat Oct 31 14:50:17 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Sat Oct 31 14:50:17 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Sat Oct 31 14:50:17 2026] smp: Brought up 1 node, 4 CPUs
[Sat Oct 31 14:50:17 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Sat Oct 31 14:50:17 2026] CPU: All CPU(s) started in HYP mode.
[Sat Oct 31 14:50:17 2026] CPU: Virtualization extensions available.
[Sat Oct 31 14:50:17 2026] devtmpfs: initialized
[Sat Oct 31 14:50:17 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Sat Oct 31 14:50:17 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Sat Oct 31 14:50:17 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Sat Oct 31 14:50:17 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Sat Oct 31 14:50:17 2026] pinctrl core: initialized pinctrl subsystem
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 16
[Sat Oct 31 14:50:17 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Sat Oct 31 14:50:17 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Sat Oct 31 14:50:17 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Sat Oct 31 14:50:17 2026] Serial: AMBA PL011 UART driver
[Sat Oct 31 14:50:17 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Sat Oct 31 14:50:17 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Sat Oct 31 14:50:17 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Sat Oct 31 14:50:17 2026] SCSI subsystem initialized
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usbfs
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver hub
[Sat Oct 31 14:50:17 2026] usbcore: registered new device driver usb
[Sat Oct 31 14:50:17 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Sat Oct 31 14:50:17 2026] clocksource: Switched to clocksource arch_sys_counter
[Sat Oct 31 14:50:17 2026] VFS: Disk quotas dquot_6.6.0
[Sat Oct 31 14:50:17 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Sat Oct 31 14:50:17 2026] FS-Cache: Loaded
[Sat Oct 31 14:50:17 2026] CacheFiles: Loaded
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 2
[Sat Oct 31 14:50:17 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Sat Oct 31 14:50:17 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Sat Oct 31 14:50:17 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Sat Oct 31 14:50:17 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 1
[Sat Oct 31 14:50:17 2026] RPC: Registered named UNIX socket transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered udp transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered tcp transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Sat Oct 31 14:50:17 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Sat Oct 31 14:50:17 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Sat Oct 31 14:50:17 2026] FS-Cache: Netfs 'nfs' registered for caching
[Sat Oct 31 14:50:17 2026] NFS: Registering the id_resolver key type
[Sat Oct 31 14:50:17 2026] Key type id_resolver registered
[Sat Oct 31 14:50:17 2026] Key type id_legacy registered
[Sat Oct 31 14:50:17 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Sat Oct 31 14:50:17 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Sat Oct 31 14:50:17 2026] io scheduler noop registered
[Sat Oct 31 14:50:17 2026] io scheduler deadline registered (default)
[Sat Oct 31 14:50:17 2026] io scheduler cfq registered
[Sat Oct 31 14:50:17 2026] io scheduler mq-deadline registered
[Sat Oct 31 14:50:17 2026] io scheduler kyber registered
[Sat Oct 31 14:50:17 2026] BCM2708FB: allocated DMA memory f7910000
[Sat Oct 31 14:50:17 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Sat Oct 31 14:50:17 2026] Console: switching to colour frame buffer device 90x30
[Sat Oct 31 14:50:17 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Sat Oct 31 14:50:17 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Sat Oct 31 14:50:17 2026] vc-sm: Videocore shared memory driver
[Sat Oct 31 14:50:17 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Sat Oct 31 14:50:17 2026] brd: module loaded
[Sat Oct 31 14:50:17 2026] loop: module loaded
[Sat Oct 31 14:50:17 2026] Loading iSCSI transport class v2.0-870.
[Sat Oct 31 14:50:17 2026] libphy: Fixed MDIO Bus: probed
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver lan78xx
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver smsc95xx
[Sat Oct 31 14:50:17 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Sat Oct 31 14:50:17 2026] Core Release: 2.80a
[Sat Oct 31 14:50:17 2026] Setting default values for core params
[Sat Oct 31 14:50:17 2026] Finished setting default values for core params
[Sat Oct 31 14:50:17 2026] Using Buffer DMA mode
[Sat Oct 31 14:50:17 2026] Periodic Transfer Interrupt Enhancement - disabled
[Sat Oct 31 14:50:17 2026] Multiprocessor Interrupt Enhancement - disabled
[Sat Oct 31 14:50:17 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Sat Oct 31 14:50:17 2026] Dedicated Tx FIFOs mode
[Sat Oct 31 14:50:17 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Sat Oct 31 14:50:17 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: Microframe scheduler enabled
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Sat Oct 31 14:50:17 2026] Init: Port Power? op_state=1
[Sat Oct 31 14:50:17 2026] Init: Power Port (0)
[Sat Oct 31 14:50:17 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Sat Oct 31 14:50:17 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Sat Oct 31 14:50:17 2026] usb usb1: Product: DWC OTG Controller
[Sat Oct 31 14:50:17 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Sat Oct 31 14:50:17 2026] usb usb1: SerialNumber: 3f980000.usb
[Sat Oct 31 14:50:17 2026] hub 1-0:1.0: USB hub found
[Sat Oct 31 14:50:17 2026] hub 1-0:1.0: 1 port detected
[Sat Oct 31 14:50:17 2026] dwc_otg: FIQ enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: NAK holdoff enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: FIQ split-transaction FSM enabled
[Sat Oct 31 14:50:17 2026] Module dwc_common_port init
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usb-storage
[Sat Oct 31 14:50:17 2026] mousedev: PS/2 mouse device common for all mice
[Sat Oct 31 14:50:17 2026] IR NEC protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR RC5(x/sz) protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR RC6 protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR JVC protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR Sony protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR SANYO protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR Sharp protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR MCE Keyboard/mouse protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR XMP protocol handler initialized
[Sat Oct 31 14:50:17 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Sat Oct 31 14:50:17 2026] bcm2835-cpufreq: min=600000 max=1200000
[Sat Oct 31 14:50:17 2026] sdhci: Secure Digital Host Controller Interface driver
[Sat Oct 31 14:50:17 2026] sdhci: Copyright(c) Pierre Ossman
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Sat Oct 31 14:50:17 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Sat Oct 31 14:50:17 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Sat Oct 31 14:50:17 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Sat Oct 31 14:50:17 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usbhid
[Sat Oct 31 14:50:17 2026] usbhid: USB HID core driver
[Sat Oct 31 14:50:17 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Sat Oct 31 14:50:17 2026] [vc_sm_connected_init]: start
[Sat Oct 31 14:50:17 2026] [vc_sm_connected_init]: end - returning 0
[Sat Oct 31 14:50:17 2026] Initializing XFRM netlink socket
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 17
[Sat Oct 31 14:50:17 2026] Key type dns_resolver registered
[Sat Oct 31 14:50:17 2026] Registering SWP/SWPB emulation handler
[Sat Oct 31 14:50:17 2026] registered taskstats version 1
[Sat Oct 31 14:50:17 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Sat Oct 31 14:50:17 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Sat Oct 31 14:50:17 2026] sdhost: log_buf @ b7907000 (f7907000)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Sat Oct 31 14:50:17 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Sat Oct 31 14:50:17 2026] of_cfs_init
[Sat Oct 31 14:50:17 2026] of_cfs_init: OK
[Sat Oct 31 14:50:17 2026] Waiting for root device /dev/mmcblk0p2...
[Sat Oct 31 14:50:17 2026] random: fast init done
[Sat Oct 31 14:50:17 2026] Indeed it is in host mode hprt0 = 00021501
[Sat Oct 31 14:50:17 2026] mmc1: new high speed SDIO card at address 0001
[Sat Oct 31 14:50:17 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Sat Oct 31 14:50:17 2026] mmc0: new high speed SDHC card at address aaaa
[Sat Oct 31 14:50:17 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Sat Oct 31 14:50:17 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Sat Oct 31 14:50:17 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Sat Oct 31 14:50:17 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Sat Oct 31 14:50:18 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Sat Oct 31 14:50:18 2026] Indeed it is in host mode hprt0 = 00001101
[Sat Oct 31 14:50:18 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Sat Oct 31 14:50:18 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sat Oct 31 14:50:18 2026] hub 1-1:1.0: USB hub found
[Sat Oct 31 14:50:18 2026] hub 1-1:1.0: 5 ports detected
[Sat Oct 31 14:50:18 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Sat Oct 31 14:50:18 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Sat Oct 31 14:50:18 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sat Oct 31 14:50:18 2026] smsc95xx v1.0.6
[Sat Oct 31 14:50:18 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Sat Oct 31 14:50:18 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): 13 orphan inodes deleted
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): recovery complete
[Sat Oct 31 14:50:19 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Sat Oct 31 14:50:19 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Sat Oct 31 14:50:19 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Sat Oct 31 14:50:19 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Sat Oct 31 14:50:19 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:19 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sat Oct 31 14:50:19 2026] devtmpfs: mounted
[Sat Oct 31 14:50:19 2026] Freeing unused kernel memory: 1024K
[Sat Oct 31 14:50:19 2026] systemd[1]: System time before build time, advancing clock.
[Sat Oct 31 14:50:19 2026] NET: Registered protocol family 10
[Sat Oct 31 14:50:19 2026] Segment Routing with IPv6
[Sat Oct 31 14:50:19 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Sat Oct 31 14:50:19 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:19 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Sat Oct 31 14:50:19 2026] systemd[1]: Detected architecture arm.
[Sat Oct 31 14:50:19 2026] systemd[1]: Set hostname to <TM06202302>.
[Sat Oct 31 14:50:19 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:19 2026] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:20 2026] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Journal Socket (/dev/log).
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on udev Kernel Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on udev Control Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on fsck to fsckd communication Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Journal Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Syslog Socket.
[Sat Oct 31 14:50:20 2026] i2c /dev entries driver
[Sat Oct 31 14:50:21 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Sat Oct 31 14:50:21 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Sat Oct 31 14:50:21 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Sat Oct 31 14:50:22 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver brcmfmac
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver usbserial
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver usbserial_generic
[Sat Oct 31 14:50:22 2026] usbserial: USB Serial support registered for generic
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver cp210x
[Sat Oct 31 14:50:22 2026] usbserial: USB Serial support registered for cp210x
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Sat Oct 31 14:50:22 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Sat Oct 31 14:50:22 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:23 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:23 2026] systemd-journald[92]: Received request to flush runtime journal from PID 1
[Sat Oct 31 14:50:23 2026] random: crng init done
[Sat Oct 31 14:50:23 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Sat Oct 31 14:50:24 2026] uart-pl011 3f201000.serial: no DMA platform data
[Sat Oct 31 14:50:25 2026] brcmfmac: power management disabled
[Sat Oct 31 14:50:25 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Sat Oct 31 14:50:26 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Sat Oct 31 14:50:26 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Sat Oct 31 14:50:27 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:50:30 2026] NET: Registered protocol family 38
[Sat Oct 31 14:50:30 2026] Bluetooth: Core ver 2.22
[Sat Oct 31 14:50:30 2026] NET: Registered protocol family 31
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI device and connection manager initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: L2CAP socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: SCO socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART driver ver 2.3
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol H4 registered
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol Broadcom registered
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP filters: protocol multicast
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM TTY layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM ver 1.11
[Sat Oct 31 14:50:31 2026] EXT4-fs (dm-0): recovery complete
[Sat Oct 31 14:50:31 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:32 2026] fuse init (API version 7.26)
[Sat Oct 31 14:50:35 2026] usb 1-1.2: USB disconnect, device number 4
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.0: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.1: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.2: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.3: device disconnected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Sat Oct 31 14:50:37 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Sat Oct 31 14:50:37 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Sat Oct 31 14:50:37 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Sat Oct 31 14:50:37 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Sat Oct 31 14:50:37 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Sat Oct 31 14:54:22 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:54:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:55:51 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:55:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:58:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:58:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:58:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:59:57 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 14:59:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:05:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:05:13 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 15:05:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:05:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:05:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:06:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:06:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:10:17 2026] rpi_firmware_get_throttled: 4 callbacks suppressed
[Sat Oct 31 15:10:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:10:19 2026] rpi_firmware_get_throttled: 4 callbacks suppressed
[Sat Oct 31 15:10:19 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:11:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:11:59 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:12:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:12:44 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:17:48 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 15:17:48 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:17:52 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 15:17:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:19:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:19:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:24:38 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:24:40 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:25:13 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:25:15 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:26:28 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:26:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:30:40 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:30:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:30:42 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:30:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:30:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:31:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:31:23 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:31:25 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:39:43 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:39:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:39:45 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:39:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:40:14 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:40:16 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:40:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:41:02 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:48:18 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:48:18 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:48:21 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:48:21 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:50:13 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:50:15 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:50:52 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:50:54 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:54:31 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 15:54:31 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:54:33 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 15:54:33 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:54:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:55:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:55:19 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:55:25 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:59:59 2026] rpi_firmware_get_throttled: 7 callbacks suppressed
[Sat Oct 31 15:59:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:00:01 2026] rpi_firmware_get_throttled: 7 callbacks suppressed
[Sat Oct 31 16:00:01 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:01:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:01:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:02:23 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 16:06:28 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:06:30 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:06:39 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:06:43 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:08:31 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:08:33 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:13:14 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 16:13:14 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:13:20 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 16:13:20 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:13:39 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:13:41 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:13:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:14:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:16:15 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 16:19:39 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:19:41 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:20:58 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:21:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:21:08 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:21:10 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:25:12 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 16:25:12 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:25:14 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 16:25:14 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:25:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:25:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:26:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:26:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:34:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 16:34:00 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:34:02 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 16:34:02 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:34:08 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:34:10 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:39:12 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:39:16 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:39:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:39:58 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:40:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:40:27 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:45:12 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:45:18 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:49:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:49:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:54:37 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:54:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:56:24 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:56:28 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:59:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:59:24 2026] Under-voltage detected! (0x00050005)

=================================================
=================================================

DateTime: 26-10-31 18:00:05

-------------------------------------------------

[Sat Oct 31 14:50:17 2026] Booting Linux on physical CPU 0x0
[Sat Oct 31 14:50:17 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Sat Oct 31 14:50:17 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Sat Oct 31 14:50:17 2026] CPU: div instructions available: patching division code
[Sat Oct 31 14:50:17 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Sat Oct 31 14:50:17 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Sat Oct 31 14:50:17 2026] Memory policy: Data cache writealloc
[Sat Oct 31 14:50:17 2026] cma: Reserved 8 MiB at 0x37800000
[Sat Oct 31 14:50:17 2026] On node 0 totalpages: 229376
[Sat Oct 31 14:50:17 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Sat Oct 31 14:50:17 2026]   Normal zone: 2016 pages used for memmap
[Sat Oct 31 14:50:17 2026]   Normal zone: 0 pages reserved
[Sat Oct 31 14:50:17 2026]   Normal zone: 229376 pages, LIFO batch:31
[Sat Oct 31 14:50:17 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Sat Oct 31 14:50:17 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Sat Oct 31 14:50:17 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Sat Oct 31 14:50:17 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Sat Oct 31 14:50:17 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Sat Oct 31 14:50:17 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Sat Oct 31 14:50:17 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Sat Oct 31 14:50:17 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Sat Oct 31 14:50:17 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Sat Oct 31 14:50:17 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Sat Oct 31 14:50:17 2026] ftrace: allocating 25298 entries in 75 pages
[Sat Oct 31 14:50:17 2026] Hierarchical RCU implementation.
[Sat Oct 31 14:50:17 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Sat Oct 31 14:50:17 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Sat Oct 31 14:50:17 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Sat Oct 31 14:50:17 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Sat Oct 31 14:50:17 2026] Switching to timer-based delay loop, resolution 52ns
[Sat Oct 31 14:50:17 2026] Console: colour dummy device 80x30
[Sat Oct 31 14:50:17 2026] console [tty1] enabled
[Sat Oct 31 14:50:17 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Sat Oct 31 14:50:17 2026] pid_max: default: 32768 minimum: 301
[Sat Oct 31 14:50:17 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sat Oct 31 14:50:17 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sat Oct 31 14:50:17 2026] Disabling memory control group subsystem
[Sat Oct 31 14:50:17 2026] CPU: Testing write buffer coherency: ok
[Sat Oct 31 14:50:17 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Sat Oct 31 14:50:17 2026] Setting up static identity map for 0x100000 - 0x10003c
[Sat Oct 31 14:50:17 2026] Hierarchical SRCU implementation.
[Sat Oct 31 14:50:17 2026] smp: Bringing up secondary CPUs ...
[Sat Oct 31 14:50:17 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Sat Oct 31 14:50:17 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Sat Oct 31 14:50:17 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Sat Oct 31 14:50:17 2026] smp: Brought up 1 node, 4 CPUs
[Sat Oct 31 14:50:17 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Sat Oct 31 14:50:17 2026] CPU: All CPU(s) started in HYP mode.
[Sat Oct 31 14:50:17 2026] CPU: Virtualization extensions available.
[Sat Oct 31 14:50:17 2026] devtmpfs: initialized
[Sat Oct 31 14:50:17 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Sat Oct 31 14:50:17 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Sat Oct 31 14:50:17 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Sat Oct 31 14:50:17 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Sat Oct 31 14:50:17 2026] pinctrl core: initialized pinctrl subsystem
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 16
[Sat Oct 31 14:50:17 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Sat Oct 31 14:50:17 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Sat Oct 31 14:50:17 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Sat Oct 31 14:50:17 2026] Serial: AMBA PL011 UART driver
[Sat Oct 31 14:50:17 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Sat Oct 31 14:50:17 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Sat Oct 31 14:50:17 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Sat Oct 31 14:50:17 2026] SCSI subsystem initialized
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usbfs
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver hub
[Sat Oct 31 14:50:17 2026] usbcore: registered new device driver usb
[Sat Oct 31 14:50:17 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Sat Oct 31 14:50:17 2026] clocksource: Switched to clocksource arch_sys_counter
[Sat Oct 31 14:50:17 2026] VFS: Disk quotas dquot_6.6.0
[Sat Oct 31 14:50:17 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Sat Oct 31 14:50:17 2026] FS-Cache: Loaded
[Sat Oct 31 14:50:17 2026] CacheFiles: Loaded
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 2
[Sat Oct 31 14:50:17 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Sat Oct 31 14:50:17 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Sat Oct 31 14:50:17 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Sat Oct 31 14:50:17 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 1
[Sat Oct 31 14:50:17 2026] RPC: Registered named UNIX socket transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered udp transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered tcp transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Sat Oct 31 14:50:17 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Sat Oct 31 14:50:17 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Sat Oct 31 14:50:17 2026] FS-Cache: Netfs 'nfs' registered for caching
[Sat Oct 31 14:50:17 2026] NFS: Registering the id_resolver key type
[Sat Oct 31 14:50:17 2026] Key type id_resolver registered
[Sat Oct 31 14:50:17 2026] Key type id_legacy registered
[Sat Oct 31 14:50:17 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Sat Oct 31 14:50:17 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Sat Oct 31 14:50:17 2026] io scheduler noop registered
[Sat Oct 31 14:50:17 2026] io scheduler deadline registered (default)
[Sat Oct 31 14:50:17 2026] io scheduler cfq registered
[Sat Oct 31 14:50:17 2026] io scheduler mq-deadline registered
[Sat Oct 31 14:50:17 2026] io scheduler kyber registered
[Sat Oct 31 14:50:17 2026] BCM2708FB: allocated DMA memory f7910000
[Sat Oct 31 14:50:17 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Sat Oct 31 14:50:17 2026] Console: switching to colour frame buffer device 90x30
[Sat Oct 31 14:50:17 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Sat Oct 31 14:50:17 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Sat Oct 31 14:50:17 2026] vc-sm: Videocore shared memory driver
[Sat Oct 31 14:50:17 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Sat Oct 31 14:50:17 2026] brd: module loaded
[Sat Oct 31 14:50:17 2026] loop: module loaded
[Sat Oct 31 14:50:17 2026] Loading iSCSI transport class v2.0-870.
[Sat Oct 31 14:50:17 2026] libphy: Fixed MDIO Bus: probed
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver lan78xx
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver smsc95xx
[Sat Oct 31 14:50:17 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Sat Oct 31 14:50:17 2026] Core Release: 2.80a
[Sat Oct 31 14:50:17 2026] Setting default values for core params
[Sat Oct 31 14:50:17 2026] Finished setting default values for core params
[Sat Oct 31 14:50:17 2026] Using Buffer DMA mode
[Sat Oct 31 14:50:17 2026] Periodic Transfer Interrupt Enhancement - disabled
[Sat Oct 31 14:50:17 2026] Multiprocessor Interrupt Enhancement - disabled
[Sat Oct 31 14:50:17 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Sat Oct 31 14:50:17 2026] Dedicated Tx FIFOs mode
[Sat Oct 31 14:50:17 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Sat Oct 31 14:50:17 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: Microframe scheduler enabled
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Sat Oct 31 14:50:17 2026] Init: Port Power? op_state=1
[Sat Oct 31 14:50:17 2026] Init: Power Port (0)
[Sat Oct 31 14:50:17 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Sat Oct 31 14:50:17 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Sat Oct 31 14:50:17 2026] usb usb1: Product: DWC OTG Controller
[Sat Oct 31 14:50:17 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Sat Oct 31 14:50:17 2026] usb usb1: SerialNumber: 3f980000.usb
[Sat Oct 31 14:50:17 2026] hub 1-0:1.0: USB hub found
[Sat Oct 31 14:50:17 2026] hub 1-0:1.0: 1 port detected
[Sat Oct 31 14:50:17 2026] dwc_otg: FIQ enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: NAK holdoff enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: FIQ split-transaction FSM enabled
[Sat Oct 31 14:50:17 2026] Module dwc_common_port init
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usb-storage
[Sat Oct 31 14:50:17 2026] mousedev: PS/2 mouse device common for all mice
[Sat Oct 31 14:50:17 2026] IR NEC protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR RC5(x/sz) protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR RC6 protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR JVC protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR Sony protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR SANYO protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR Sharp protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR MCE Keyboard/mouse protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR XMP protocol handler initialized
[Sat Oct 31 14:50:17 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Sat Oct 31 14:50:17 2026] bcm2835-cpufreq: min=600000 max=1200000
[Sat Oct 31 14:50:17 2026] sdhci: Secure Digital Host Controller Interface driver
[Sat Oct 31 14:50:17 2026] sdhci: Copyright(c) Pierre Ossman
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Sat Oct 31 14:50:17 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Sat Oct 31 14:50:17 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Sat Oct 31 14:50:17 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Sat Oct 31 14:50:17 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usbhid
[Sat Oct 31 14:50:17 2026] usbhid: USB HID core driver
[Sat Oct 31 14:50:17 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Sat Oct 31 14:50:17 2026] [vc_sm_connected_init]: start
[Sat Oct 31 14:50:17 2026] [vc_sm_connected_init]: end - returning 0
[Sat Oct 31 14:50:17 2026] Initializing XFRM netlink socket
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 17
[Sat Oct 31 14:50:17 2026] Key type dns_resolver registered
[Sat Oct 31 14:50:17 2026] Registering SWP/SWPB emulation handler
[Sat Oct 31 14:50:17 2026] registered taskstats version 1
[Sat Oct 31 14:50:17 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Sat Oct 31 14:50:17 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Sat Oct 31 14:50:17 2026] sdhost: log_buf @ b7907000 (f7907000)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Sat Oct 31 14:50:17 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Sat Oct 31 14:50:17 2026] of_cfs_init
[Sat Oct 31 14:50:17 2026] of_cfs_init: OK
[Sat Oct 31 14:50:17 2026] Waiting for root device /dev/mmcblk0p2...
[Sat Oct 31 14:50:17 2026] random: fast init done
[Sat Oct 31 14:50:17 2026] Indeed it is in host mode hprt0 = 00021501
[Sat Oct 31 14:50:17 2026] mmc1: new high speed SDIO card at address 0001
[Sat Oct 31 14:50:17 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Sat Oct 31 14:50:17 2026] mmc0: new high speed SDHC card at address aaaa
[Sat Oct 31 14:50:17 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Sat Oct 31 14:50:17 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Sat Oct 31 14:50:17 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Sat Oct 31 14:50:17 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Sat Oct 31 14:50:18 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Sat Oct 31 14:50:18 2026] Indeed it is in host mode hprt0 = 00001101
[Sat Oct 31 14:50:18 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Sat Oct 31 14:50:18 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sat Oct 31 14:50:18 2026] hub 1-1:1.0: USB hub found
[Sat Oct 31 14:50:18 2026] hub 1-1:1.0: 5 ports detected
[Sat Oct 31 14:50:18 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Sat Oct 31 14:50:18 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Sat Oct 31 14:50:18 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sat Oct 31 14:50:18 2026] smsc95xx v1.0.6
[Sat Oct 31 14:50:18 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Sat Oct 31 14:50:18 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): 13 orphan inodes deleted
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): recovery complete
[Sat Oct 31 14:50:19 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Sat Oct 31 14:50:19 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Sat Oct 31 14:50:19 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Sat Oct 31 14:50:19 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Sat Oct 31 14:50:19 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:19 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sat Oct 31 14:50:19 2026] devtmpfs: mounted
[Sat Oct 31 14:50:19 2026] Freeing unused kernel memory: 1024K
[Sat Oct 31 14:50:19 2026] systemd[1]: System time before build time, advancing clock.
[Sat Oct 31 14:50:19 2026] NET: Registered protocol family 10
[Sat Oct 31 14:50:19 2026] Segment Routing with IPv6
[Sat Oct 31 14:50:19 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Sat Oct 31 14:50:19 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:19 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Sat Oct 31 14:50:19 2026] systemd[1]: Detected architecture arm.
[Sat Oct 31 14:50:19 2026] systemd[1]: Set hostname to <TM06202302>.
[Sat Oct 31 14:50:19 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:19 2026] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:20 2026] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Journal Socket (/dev/log).
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on udev Kernel Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on udev Control Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on fsck to fsckd communication Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Journal Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Syslog Socket.
[Sat Oct 31 14:50:20 2026] i2c /dev entries driver
[Sat Oct 31 14:50:21 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Sat Oct 31 14:50:21 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Sat Oct 31 14:50:21 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Sat Oct 31 14:50:22 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver brcmfmac
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver usbserial
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver usbserial_generic
[Sat Oct 31 14:50:22 2026] usbserial: USB Serial support registered for generic
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver cp210x
[Sat Oct 31 14:50:22 2026] usbserial: USB Serial support registered for cp210x
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Sat Oct 31 14:50:22 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Sat Oct 31 14:50:22 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:23 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:23 2026] systemd-journald[92]: Received request to flush runtime journal from PID 1
[Sat Oct 31 14:50:23 2026] random: crng init done
[Sat Oct 31 14:50:23 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Sat Oct 31 14:50:24 2026] uart-pl011 3f201000.serial: no DMA platform data
[Sat Oct 31 14:50:25 2026] brcmfmac: power management disabled
[Sat Oct 31 14:50:25 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Sat Oct 31 14:50:26 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Sat Oct 31 14:50:26 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Sat Oct 31 14:50:27 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:50:30 2026] NET: Registered protocol family 38
[Sat Oct 31 14:50:30 2026] Bluetooth: Core ver 2.22
[Sat Oct 31 14:50:30 2026] NET: Registered protocol family 31
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI device and connection manager initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: L2CAP socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: SCO socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART driver ver 2.3
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol H4 registered
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol Broadcom registered
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP filters: protocol multicast
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM TTY layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM ver 1.11
[Sat Oct 31 14:50:31 2026] EXT4-fs (dm-0): recovery complete
[Sat Oct 31 14:50:31 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:32 2026] fuse init (API version 7.26)
[Sat Oct 31 14:50:35 2026] usb 1-1.2: USB disconnect, device number 4
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.0: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.1: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.2: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.3: device disconnected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Sat Oct 31 14:50:37 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Sat Oct 31 14:50:37 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Sat Oct 31 14:50:37 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Sat Oct 31 14:50:37 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Sat Oct 31 14:50:37 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Sat Oct 31 14:54:22 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:54:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:55:51 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:55:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:58:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:58:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:58:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:59:57 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 14:59:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:05:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:05:13 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 15:05:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:05:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:05:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:06:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:06:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:10:17 2026] rpi_firmware_get_throttled: 4 callbacks suppressed
[Sat Oct 31 15:10:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:10:19 2026] rpi_firmware_get_throttled: 4 callbacks suppressed
[Sat Oct 31 15:10:19 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:11:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:11:59 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:12:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:12:44 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:17:48 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 15:17:48 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:17:52 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 15:17:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:19:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:19:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:24:38 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:24:40 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:25:13 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:25:15 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:26:28 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:26:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:30:40 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:30:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:30:42 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:30:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:30:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:31:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:31:23 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:31:25 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:39:43 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:39:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:39:45 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:39:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:40:14 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:40:16 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:40:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:41:02 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:48:18 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:48:18 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:48:21 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:48:21 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:50:13 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:50:15 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:50:52 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:50:54 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:54:31 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 15:54:31 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:54:33 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 15:54:33 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:54:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:55:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:55:19 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:55:25 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:59:59 2026] rpi_firmware_get_throttled: 7 callbacks suppressed
[Sat Oct 31 15:59:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:00:01 2026] rpi_firmware_get_throttled: 7 callbacks suppressed
[Sat Oct 31 16:00:01 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:01:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:01:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:02:23 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 16:06:28 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:06:30 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:06:39 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:06:43 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:08:31 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:08:33 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:13:14 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 16:13:14 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:13:20 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 16:13:20 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:13:39 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:13:41 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:13:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:14:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:16:15 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 16:19:39 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:19:41 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:20:58 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:21:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:21:08 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:21:10 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:25:12 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 16:25:12 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:25:14 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 16:25:14 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:25:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:25:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:26:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:26:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:34:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 16:34:00 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:34:02 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 16:34:02 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:34:08 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:34:10 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:39:12 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:39:16 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:39:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:39:58 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:40:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:40:27 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:45:12 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:45:18 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:49:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:49:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:54:37 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:54:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:56:24 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:56:28 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:59:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:59:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:00:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:00:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:03:42 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:03:47 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:06:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:06:23 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:09:38 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:09:40 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:11:26 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:11:30 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:12:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:12:14 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:12:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:13:02 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:19:43 2026] rpi_firmware_get_throttled: 4 callbacks suppressed
[Sat Oct 31 17:19:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:19:45 2026] rpi_firmware_get_throttled: 4 callbacks suppressed
[Sat Oct 31 17:19:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:27:19 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:27:21 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:27:44 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:27:46 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:27:52 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:27:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:33:17 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 17:33:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:33:19 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 17:33:19 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:34:42 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:34:44 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:35:51 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:35:57 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:38:29 2026] rpi_firmware_get_throttled: 5 callbacks suppressed
[Sat Oct 31 17:38:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:38:33 2026] rpi_firmware_get_throttled: 5 callbacks suppressed
[Sat Oct 31 17:38:33 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:39:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:39:14 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:41:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:41:53 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:47:15 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:47:17 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:47:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:47:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:48:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:48:59 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:55:55 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 17:55:55 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:55:57 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 17:55:57 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:57:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:57:51 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:58:37 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:58:39 2026] Under-voltage detected! (0x00050005)

=================================================
=================================================

DateTime: 26-10-31 19:00:05

-------------------------------------------------

[Sat Oct 31 14:50:17 2026] Booting Linux on physical CPU 0x0
[Sat Oct 31 14:50:17 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Sat Oct 31 14:50:17 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Sat Oct 31 14:50:17 2026] CPU: div instructions available: patching division code
[Sat Oct 31 14:50:17 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Sat Oct 31 14:50:17 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Sat Oct 31 14:50:17 2026] Memory policy: Data cache writealloc
[Sat Oct 31 14:50:17 2026] cma: Reserved 8 MiB at 0x37800000
[Sat Oct 31 14:50:17 2026] On node 0 totalpages: 229376
[Sat Oct 31 14:50:17 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Sat Oct 31 14:50:17 2026]   Normal zone: 2016 pages used for memmap
[Sat Oct 31 14:50:17 2026]   Normal zone: 0 pages reserved
[Sat Oct 31 14:50:17 2026]   Normal zone: 229376 pages, LIFO batch:31
[Sat Oct 31 14:50:17 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Sat Oct 31 14:50:17 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Sat Oct 31 14:50:17 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Sat Oct 31 14:50:17 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Sat Oct 31 14:50:17 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Sat Oct 31 14:50:17 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Sat Oct 31 14:50:17 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Sat Oct 31 14:50:17 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Sat Oct 31 14:50:17 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Sat Oct 31 14:50:17 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Sat Oct 31 14:50:17 2026] ftrace: allocating 25298 entries in 75 pages
[Sat Oct 31 14:50:17 2026] Hierarchical RCU implementation.
[Sat Oct 31 14:50:17 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Sat Oct 31 14:50:17 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Sat Oct 31 14:50:17 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Sat Oct 31 14:50:17 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Sat Oct 31 14:50:17 2026] Switching to timer-based delay loop, resolution 52ns
[Sat Oct 31 14:50:17 2026] Console: colour dummy device 80x30
[Sat Oct 31 14:50:17 2026] console [tty1] enabled
[Sat Oct 31 14:50:17 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Sat Oct 31 14:50:17 2026] pid_max: default: 32768 minimum: 301
[Sat Oct 31 14:50:17 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sat Oct 31 14:50:17 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sat Oct 31 14:50:17 2026] Disabling memory control group subsystem
[Sat Oct 31 14:50:17 2026] CPU: Testing write buffer coherency: ok
[Sat Oct 31 14:50:17 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Sat Oct 31 14:50:17 2026] Setting up static identity map for 0x100000 - 0x10003c
[Sat Oct 31 14:50:17 2026] Hierarchical SRCU implementation.
[Sat Oct 31 14:50:17 2026] smp: Bringing up secondary CPUs ...
[Sat Oct 31 14:50:17 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Sat Oct 31 14:50:17 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Sat Oct 31 14:50:17 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Sat Oct 31 14:50:17 2026] smp: Brought up 1 node, 4 CPUs
[Sat Oct 31 14:50:17 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Sat Oct 31 14:50:17 2026] CPU: All CPU(s) started in HYP mode.
[Sat Oct 31 14:50:17 2026] CPU: Virtualization extensions available.
[Sat Oct 31 14:50:17 2026] devtmpfs: initialized
[Sat Oct 31 14:50:17 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Sat Oct 31 14:50:17 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Sat Oct 31 14:50:17 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Sat Oct 31 14:50:17 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Sat Oct 31 14:50:17 2026] pinctrl core: initialized pinctrl subsystem
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 16
[Sat Oct 31 14:50:17 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Sat Oct 31 14:50:17 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Sat Oct 31 14:50:17 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Sat Oct 31 14:50:17 2026] Serial: AMBA PL011 UART driver
[Sat Oct 31 14:50:17 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Sat Oct 31 14:50:17 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Sat Oct 31 14:50:17 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Sat Oct 31 14:50:17 2026] SCSI subsystem initialized
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usbfs
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver hub
[Sat Oct 31 14:50:17 2026] usbcore: registered new device driver usb
[Sat Oct 31 14:50:17 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Sat Oct 31 14:50:17 2026] clocksource: Switched to clocksource arch_sys_counter
[Sat Oct 31 14:50:17 2026] VFS: Disk quotas dquot_6.6.0
[Sat Oct 31 14:50:17 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Sat Oct 31 14:50:17 2026] FS-Cache: Loaded
[Sat Oct 31 14:50:17 2026] CacheFiles: Loaded
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 2
[Sat Oct 31 14:50:17 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Sat Oct 31 14:50:17 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Sat Oct 31 14:50:17 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Sat Oct 31 14:50:17 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 1
[Sat Oct 31 14:50:17 2026] RPC: Registered named UNIX socket transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered udp transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered tcp transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Sat Oct 31 14:50:17 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Sat Oct 31 14:50:17 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Sat Oct 31 14:50:17 2026] FS-Cache: Netfs 'nfs' registered for caching
[Sat Oct 31 14:50:17 2026] NFS: Registering the id_resolver key type
[Sat Oct 31 14:50:17 2026] Key type id_resolver registered
[Sat Oct 31 14:50:17 2026] Key type id_legacy registered
[Sat Oct 31 14:50:17 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Sat Oct 31 14:50:17 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Sat Oct 31 14:50:17 2026] io scheduler noop registered
[Sat Oct 31 14:50:17 2026] io scheduler deadline registered (default)
[Sat Oct 31 14:50:17 2026] io scheduler cfq registered
[Sat Oct 31 14:50:17 2026] io scheduler mq-deadline registered
[Sat Oct 31 14:50:17 2026] io scheduler kyber registered
[Sat Oct 31 14:50:17 2026] BCM2708FB: allocated DMA memory f7910000
[Sat Oct 31 14:50:17 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Sat Oct 31 14:50:17 2026] Console: switching to colour frame buffer device 90x30
[Sat Oct 31 14:50:17 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Sat Oct 31 14:50:17 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Sat Oct 31 14:50:17 2026] vc-sm: Videocore shared memory driver
[Sat Oct 31 14:50:17 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Sat Oct 31 14:50:17 2026] brd: module loaded
[Sat Oct 31 14:50:17 2026] loop: module loaded
[Sat Oct 31 14:50:17 2026] Loading iSCSI transport class v2.0-870.
[Sat Oct 31 14:50:17 2026] libphy: Fixed MDIO Bus: probed
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver lan78xx
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver smsc95xx
[Sat Oct 31 14:50:17 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Sat Oct 31 14:50:17 2026] Core Release: 2.80a
[Sat Oct 31 14:50:17 2026] Setting default values for core params
[Sat Oct 31 14:50:17 2026] Finished setting default values for core params
[Sat Oct 31 14:50:17 2026] Using Buffer DMA mode
[Sat Oct 31 14:50:17 2026] Periodic Transfer Interrupt Enhancement - disabled
[Sat Oct 31 14:50:17 2026] Multiprocessor Interrupt Enhancement - disabled
[Sat Oct 31 14:50:17 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Sat Oct 31 14:50:17 2026] Dedicated Tx FIFOs mode
[Sat Oct 31 14:50:17 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Sat Oct 31 14:50:17 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: Microframe scheduler enabled
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Sat Oct 31 14:50:17 2026] Init: Port Power? op_state=1
[Sat Oct 31 14:50:17 2026] Init: Power Port (0)
[Sat Oct 31 14:50:17 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Sat Oct 31 14:50:17 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Sat Oct 31 14:50:17 2026] usb usb1: Product: DWC OTG Controller
[Sat Oct 31 14:50:17 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Sat Oct 31 14:50:17 2026] usb usb1: SerialNumber: 3f980000.usb
[Sat Oct 31 14:50:17 2026] hub 1-0:1.0: USB hub found
[Sat Oct 31 14:50:17 2026] hub 1-0:1.0: 1 port detected
[Sat Oct 31 14:50:17 2026] dwc_otg: FIQ enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: NAK holdoff enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: FIQ split-transaction FSM enabled
[Sat Oct 31 14:50:17 2026] Module dwc_common_port init
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usb-storage
[Sat Oct 31 14:50:17 2026] mousedev: PS/2 mouse device common for all mice
[Sat Oct 31 14:50:17 2026] IR NEC protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR RC5(x/sz) protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR RC6 protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR JVC protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR Sony protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR SANYO protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR Sharp protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR MCE Keyboard/mouse protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR XMP protocol handler initialized
[Sat Oct 31 14:50:17 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Sat Oct 31 14:50:17 2026] bcm2835-cpufreq: min=600000 max=1200000
[Sat Oct 31 14:50:17 2026] sdhci: Secure Digital Host Controller Interface driver
[Sat Oct 31 14:50:17 2026] sdhci: Copyright(c) Pierre Ossman
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Sat Oct 31 14:50:17 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Sat Oct 31 14:50:17 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Sat Oct 31 14:50:17 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Sat Oct 31 14:50:17 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usbhid
[Sat Oct 31 14:50:17 2026] usbhid: USB HID core driver
[Sat Oct 31 14:50:17 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Sat Oct 31 14:50:17 2026] [vc_sm_connected_init]: start
[Sat Oct 31 14:50:17 2026] [vc_sm_connected_init]: end - returning 0
[Sat Oct 31 14:50:17 2026] Initializing XFRM netlink socket
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 17
[Sat Oct 31 14:50:17 2026] Key type dns_resolver registered
[Sat Oct 31 14:50:17 2026] Registering SWP/SWPB emulation handler
[Sat Oct 31 14:50:17 2026] registered taskstats version 1
[Sat Oct 31 14:50:17 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Sat Oct 31 14:50:17 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Sat Oct 31 14:50:17 2026] sdhost: log_buf @ b7907000 (f7907000)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Sat Oct 31 14:50:17 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Sat Oct 31 14:50:17 2026] of_cfs_init
[Sat Oct 31 14:50:17 2026] of_cfs_init: OK
[Sat Oct 31 14:50:17 2026] Waiting for root device /dev/mmcblk0p2...
[Sat Oct 31 14:50:17 2026] random: fast init done
[Sat Oct 31 14:50:17 2026] Indeed it is in host mode hprt0 = 00021501
[Sat Oct 31 14:50:17 2026] mmc1: new high speed SDIO card at address 0001
[Sat Oct 31 14:50:17 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Sat Oct 31 14:50:17 2026] mmc0: new high speed SDHC card at address aaaa
[Sat Oct 31 14:50:17 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Sat Oct 31 14:50:17 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Sat Oct 31 14:50:17 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Sat Oct 31 14:50:17 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Sat Oct 31 14:50:18 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Sat Oct 31 14:50:18 2026] Indeed it is in host mode hprt0 = 00001101
[Sat Oct 31 14:50:18 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Sat Oct 31 14:50:18 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sat Oct 31 14:50:18 2026] hub 1-1:1.0: USB hub found
[Sat Oct 31 14:50:18 2026] hub 1-1:1.0: 5 ports detected
[Sat Oct 31 14:50:18 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Sat Oct 31 14:50:18 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Sat Oct 31 14:50:18 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sat Oct 31 14:50:18 2026] smsc95xx v1.0.6
[Sat Oct 31 14:50:18 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Sat Oct 31 14:50:18 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): 13 orphan inodes deleted
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): recovery complete
[Sat Oct 31 14:50:19 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Sat Oct 31 14:50:19 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Sat Oct 31 14:50:19 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Sat Oct 31 14:50:19 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Sat Oct 31 14:50:19 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:19 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sat Oct 31 14:50:19 2026] devtmpfs: mounted
[Sat Oct 31 14:50:19 2026] Freeing unused kernel memory: 1024K
[Sat Oct 31 14:50:19 2026] systemd[1]: System time before build time, advancing clock.
[Sat Oct 31 14:50:19 2026] NET: Registered protocol family 10
[Sat Oct 31 14:50:19 2026] Segment Routing with IPv6
[Sat Oct 31 14:50:19 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Sat Oct 31 14:50:19 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:19 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Sat Oct 31 14:50:19 2026] systemd[1]: Detected architecture arm.
[Sat Oct 31 14:50:19 2026] systemd[1]: Set hostname to <TM06202302>.
[Sat Oct 31 14:50:19 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:19 2026] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:20 2026] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Journal Socket (/dev/log).
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on udev Kernel Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on udev Control Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on fsck to fsckd communication Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Journal Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Syslog Socket.
[Sat Oct 31 14:50:20 2026] i2c /dev entries driver
[Sat Oct 31 14:50:21 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Sat Oct 31 14:50:21 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Sat Oct 31 14:50:21 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Sat Oct 31 14:50:22 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver brcmfmac
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver usbserial
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver usbserial_generic
[Sat Oct 31 14:50:22 2026] usbserial: USB Serial support registered for generic
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver cp210x
[Sat Oct 31 14:50:22 2026] usbserial: USB Serial support registered for cp210x
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Sat Oct 31 14:50:22 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Sat Oct 31 14:50:22 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:23 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:23 2026] systemd-journald[92]: Received request to flush runtime journal from PID 1
[Sat Oct 31 14:50:23 2026] random: crng init done
[Sat Oct 31 14:50:23 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Sat Oct 31 14:50:24 2026] uart-pl011 3f201000.serial: no DMA platform data
[Sat Oct 31 14:50:25 2026] brcmfmac: power management disabled
[Sat Oct 31 14:50:25 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Sat Oct 31 14:50:26 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Sat Oct 31 14:50:26 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Sat Oct 31 14:50:27 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:50:30 2026] NET: Registered protocol family 38
[Sat Oct 31 14:50:30 2026] Bluetooth: Core ver 2.22
[Sat Oct 31 14:50:30 2026] NET: Registered protocol family 31
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI device and connection manager initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: L2CAP socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: SCO socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART driver ver 2.3
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol H4 registered
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol Broadcom registered
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP filters: protocol multicast
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM TTY layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM ver 1.11
[Sat Oct 31 14:50:31 2026] EXT4-fs (dm-0): recovery complete
[Sat Oct 31 14:50:31 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:32 2026] fuse init (API version 7.26)
[Sat Oct 31 14:50:35 2026] usb 1-1.2: USB disconnect, device number 4
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.0: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.1: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.2: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.3: device disconnected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Sat Oct 31 14:50:37 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Sat Oct 31 14:50:37 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Sat Oct 31 14:50:37 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Sat Oct 31 14:50:37 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Sat Oct 31 14:50:37 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Sat Oct 31 14:54:22 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:54:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:55:51 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:55:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:58:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:58:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:58:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:59:57 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 14:59:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:05:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:05:13 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 15:05:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:05:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:05:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:06:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:06:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:10:17 2026] rpi_firmware_get_throttled: 4 callbacks suppressed
[Sat Oct 31 15:10:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:10:19 2026] rpi_firmware_get_throttled: 4 callbacks suppressed
[Sat Oct 31 15:10:19 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:11:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:11:59 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:12:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:12:44 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:17:48 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 15:17:48 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:17:52 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 15:17:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:19:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:19:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:24:38 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:24:40 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:25:13 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:25:15 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:26:28 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:26:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:30:40 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:30:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:30:42 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:30:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:30:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:31:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:31:23 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:31:25 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:39:43 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:39:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:39:45 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:39:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:40:14 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:40:16 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:40:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:41:02 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:48:18 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:48:18 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:48:21 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:48:21 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:50:13 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:50:15 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:50:52 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:50:54 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:54:31 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 15:54:31 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:54:33 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 15:54:33 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:54:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:55:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:55:19 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:55:25 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:59:59 2026] rpi_firmware_get_throttled: 7 callbacks suppressed
[Sat Oct 31 15:59:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:00:01 2026] rpi_firmware_get_throttled: 7 callbacks suppressed
[Sat Oct 31 16:00:01 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:01:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:01:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:02:23 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 16:06:28 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:06:30 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:06:39 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:06:43 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:08:31 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:08:33 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:13:14 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 16:13:14 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:13:20 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 16:13:20 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:13:39 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:13:41 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:13:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:14:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:16:15 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 16:19:39 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:19:41 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:20:58 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:21:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:21:08 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:21:10 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:25:12 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 16:25:12 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:25:14 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 16:25:14 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:25:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:25:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:26:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:26:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:34:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 16:34:00 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:34:02 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 16:34:02 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:34:08 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:34:10 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:39:12 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:39:16 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:39:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:39:58 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:40:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:40:27 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:45:12 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:45:18 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:49:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:49:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:54:37 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:54:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:56:24 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:56:28 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:59:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:59:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:00:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:00:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:03:42 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:03:47 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:06:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:06:23 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:09:38 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:09:40 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:11:26 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:11:30 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:12:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:12:14 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:12:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:13:02 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:19:43 2026] rpi_firmware_get_throttled: 4 callbacks suppressed
[Sat Oct 31 17:19:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:19:45 2026] rpi_firmware_get_throttled: 4 callbacks suppressed
[Sat Oct 31 17:19:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:27:19 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:27:21 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:27:44 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:27:46 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:27:52 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:27:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:33:17 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 17:33:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:33:19 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 17:33:19 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:34:42 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:34:44 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:35:51 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:35:57 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:38:29 2026] rpi_firmware_get_throttled: 5 callbacks suppressed
[Sat Oct 31 17:38:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:38:33 2026] rpi_firmware_get_throttled: 5 callbacks suppressed
[Sat Oct 31 17:38:33 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:39:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:39:14 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:41:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:41:53 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:47:15 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:47:17 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:47:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:47:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:48:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:48:59 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:55:55 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 17:55:55 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:55:57 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 17:55:57 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:57:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:57:51 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:58:37 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:58:39 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 18:09:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 18:19:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 18:29:51 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 18:29:51 2026] Voltage normalised (0x00000000)
[Sat Oct 31 18:29:55 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 18:29:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 18:50:18 2026] Voltage normalised (0x00000000)
[Sat Oct 31 18:50:21 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 18:54:48 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 18:54:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 18:55:01 2026] cp210x ttyUSB0: failed to get comm status: -71

=================================================
=================================================

DateTime: 26-10-31 20:00:06

-------------------------------------------------

[Sat Oct 31 14:50:17 2026] Booting Linux on physical CPU 0x0
[Sat Oct 31 14:50:17 2026] Linux version 4.14.98-v7+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1200 SMP Tue Feb 12 20:27:48 GMT 2019
[Sat Oct 31 14:50:17 2026] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[Sat Oct 31 14:50:17 2026] CPU: div instructions available: patching division code
[Sat Oct 31 14:50:17 2026] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[Sat Oct 31 14:50:17 2026] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[Sat Oct 31 14:50:17 2026] Memory policy: Data cache writealloc
[Sat Oct 31 14:50:17 2026] cma: Reserved 8 MiB at 0x37800000
[Sat Oct 31 14:50:17 2026] On node 0 totalpages: 229376
[Sat Oct 31 14:50:17 2026] free_area_init_node: node 0, pgdat 80c85780, node_mem_map b7014000
[Sat Oct 31 14:50:17 2026]   Normal zone: 2016 pages used for memmap
[Sat Oct 31 14:50:17 2026]   Normal zone: 0 pages reserved
[Sat Oct 31 14:50:17 2026]   Normal zone: 229376 pages, LIFO batch:31
[Sat Oct 31 14:50:17 2026] percpu: Embedded 17 pages/cpu @b6fbd000 s38720 r8192 d22720 u69632
[Sat Oct 31 14:50:17 2026] pcpu-alloc: s38720 r8192 d22720 u69632 alloc=17*4096
[Sat Oct 31 14:50:17 2026] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[Sat Oct 31 14:50:17 2026] Built 1 zonelists, mobility grouping on.  Total pages: 227360
[Sat Oct 31 14:50:17 2026] Kernel command line: 8250.nr_uarts=0 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles logo.nologo
[Sat Oct 31 14:50:17 2026] PID hash table entries: 4096 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[Sat Oct 31 14:50:17 2026] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[Sat Oct 31 14:50:17 2026] Memory: 887452K/917504K available (7168K kernel code, 577K rwdata, 2080K rodata, 1024K init, 698K bss, 21860K reserved, 8192K cma-reserved)
[Sat Oct 31 14:50:17 2026] Virtual kernel memory layout:
                               vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                               fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                               vmalloc : 0xb8800000 - 0xff800000   (1136 MB)
                               lowmem  : 0x80000000 - 0xb8000000   ( 896 MB)
                               modules : 0x7f000000 - 0x80000000   (  16 MB)
                                 .text : 0x80008000 - 0x80800000   (8160 kB)
                                 .init : 0x80b00000 - 0x80c00000   (1024 kB)
                                 .data : 0x80c00000 - 0x80c906d4   ( 578 kB)
                                  .bss : 0x80c97ef8 - 0x80d468f0   ( 699 kB)
[Sat Oct 31 14:50:17 2026] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[Sat Oct 31 14:50:17 2026] ftrace: allocating 25298 entries in 75 pages
[Sat Oct 31 14:50:17 2026] Hierarchical RCU implementation.
[Sat Oct 31 14:50:17 2026] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[Sat Oct 31 14:50:17 2026] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[Sat Oct 31 14:50:17 2026] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[Sat Oct 31 14:50:17 2026] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[Sat Oct 31 14:50:17 2026] Switching to timer-based delay loop, resolution 52ns
[Sat Oct 31 14:50:17 2026] Console: colour dummy device 80x30
[Sat Oct 31 14:50:17 2026] console [tty1] enabled
[Sat Oct 31 14:50:17 2026] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[Sat Oct 31 14:50:17 2026] pid_max: default: 32768 minimum: 301
[Sat Oct 31 14:50:17 2026] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sat Oct 31 14:50:17 2026] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[Sat Oct 31 14:50:17 2026] Disabling memory control group subsystem
[Sat Oct 31 14:50:17 2026] CPU: Testing write buffer coherency: ok
[Sat Oct 31 14:50:17 2026] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[Sat Oct 31 14:50:17 2026] Setting up static identity map for 0x100000 - 0x10003c
[Sat Oct 31 14:50:17 2026] Hierarchical SRCU implementation.
[Sat Oct 31 14:50:17 2026] smp: Bringing up secondary CPUs ...
[Sat Oct 31 14:50:17 2026] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[Sat Oct 31 14:50:17 2026] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[Sat Oct 31 14:50:17 2026] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[Sat Oct 31 14:50:17 2026] smp: Brought up 1 node, 4 CPUs
[Sat Oct 31 14:50:17 2026] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[Sat Oct 31 14:50:17 2026] CPU: All CPU(s) started in HYP mode.
[Sat Oct 31 14:50:17 2026] CPU: Virtualization extensions available.
[Sat Oct 31 14:50:17 2026] devtmpfs: initialized
[Sat Oct 31 14:50:17 2026] random: get_random_u32 called from bucket_table_alloc+0xfc/0x24c with crng_init=0
[Sat Oct 31 14:50:17 2026] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[Sat Oct 31 14:50:17 2026] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[Sat Oct 31 14:50:17 2026] futex hash table entries: 1024 (order: 4, 65536 bytes)
[Sat Oct 31 14:50:17 2026] pinctrl core: initialized pinctrl subsystem
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 16
[Sat Oct 31 14:50:17 2026] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[Sat Oct 31 14:50:17 2026] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[Sat Oct 31 14:50:17 2026] hw-breakpoint: maximum watchpoint size is 8 bytes.
[Sat Oct 31 14:50:17 2026] Serial: AMBA PL011 UART driver
[Sat Oct 31 14:50:17 2026] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[Sat Oct 31 14:50:17 2026] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[Sat Oct 31 14:50:17 2026] bcm2835-dma 3f007000.dma: DMA legacy API manager at b8813000, dmachans=0x1
[Sat Oct 31 14:50:17 2026] SCSI subsystem initialized
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usbfs
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver hub
[Sat Oct 31 14:50:17 2026] usbcore: registered new device driver usb
[Sat Oct 31 14:50:17 2026] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-03-27 15:48
[Sat Oct 31 14:50:17 2026] clocksource: Switched to clocksource arch_sys_counter
[Sat Oct 31 14:50:17 2026] VFS: Disk quotas dquot_6.6.0
[Sat Oct 31 14:50:17 2026] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[Sat Oct 31 14:50:17 2026] FS-Cache: Loaded
[Sat Oct 31 14:50:17 2026] CacheFiles: Loaded
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 2
[Sat Oct 31 14:50:17 2026] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[Sat Oct 31 14:50:17 2026] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[Sat Oct 31 14:50:17 2026] TCP: Hash tables configured (established 8192 bind 8192)
[Sat Oct 31 14:50:17 2026] UDP hash table entries: 512 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 1
[Sat Oct 31 14:50:17 2026] RPC: Registered named UNIX socket transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered udp transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered tcp transport module.
[Sat Oct 31 14:50:17 2026] RPC: Registered tcp NFSv4.1 backchannel transport module.
[Sat Oct 31 14:50:17 2026] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[Sat Oct 31 14:50:17 2026] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[Sat Oct 31 14:50:17 2026] FS-Cache: Netfs 'nfs' registered for caching
[Sat Oct 31 14:50:17 2026] NFS: Registering the id_resolver key type
[Sat Oct 31 14:50:17 2026] Key type id_resolver registered
[Sat Oct 31 14:50:17 2026] Key type id_legacy registered
[Sat Oct 31 14:50:17 2026] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[Sat Oct 31 14:50:17 2026] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[Sat Oct 31 14:50:17 2026] io scheduler noop registered
[Sat Oct 31 14:50:17 2026] io scheduler deadline registered (default)
[Sat Oct 31 14:50:17 2026] io scheduler cfq registered
[Sat Oct 31 14:50:17 2026] io scheduler mq-deadline registered
[Sat Oct 31 14:50:17 2026] io scheduler kyber registered
[Sat Oct 31 14:50:17 2026] BCM2708FB: allocated DMA memory f7910000
[Sat Oct 31 14:50:17 2026] BCM2708FB: allocated DMA channel 0 @ b8813000
[Sat Oct 31 14:50:17 2026] Console: switching to colour frame buffer device 90x30
[Sat Oct 31 14:50:17 2026] bcm2835-rng 3f104000.rng: hwrng registered
[Sat Oct 31 14:50:17 2026] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[Sat Oct 31 14:50:17 2026] vc-sm: Videocore shared memory driver
[Sat Oct 31 14:50:17 2026] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
[Sat Oct 31 14:50:17 2026] brd: module loaded
[Sat Oct 31 14:50:17 2026] loop: module loaded
[Sat Oct 31 14:50:17 2026] Loading iSCSI transport class v2.0-870.
[Sat Oct 31 14:50:17 2026] libphy: Fixed MDIO Bus: probed
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver lan78xx
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver smsc95xx
[Sat Oct 31 14:50:17 2026] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: base=0xf0980000
[Sat Oct 31 14:50:17 2026] Core Release: 2.80a
[Sat Oct 31 14:50:17 2026] Setting default values for core params
[Sat Oct 31 14:50:17 2026] Finished setting default values for core params
[Sat Oct 31 14:50:17 2026] Using Buffer DMA mode
[Sat Oct 31 14:50:17 2026] Periodic Transfer Interrupt Enhancement - disabled
[Sat Oct 31 14:50:17 2026] Multiprocessor Interrupt Enhancement - disabled
[Sat Oct 31 14:50:17 2026] OTG VER PARAM: 0, OTG VER FLAG: 0
[Sat Oct 31 14:50:17 2026] Dedicated Tx FIFOs mode
[Sat Oct 31 14:50:17 2026] WARN::dwc_otg_hcd_init:1046: FIQ DMA bounce buffers: virt = 0xb7904000 dma = 0xf7904000 len=9024
[Sat Oct 31 14:50:17 2026] FIQ FSM acceleration enabled for :
                           Non-periodic Split Transactions
                           Periodic Split Transactions
                           High-Speed Isochronous Endpoints
                           Interrupt/Control Split Transaction hack enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: Microframe scheduler enabled
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:459: FIQ on core 1 at 0x805ed94c
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:460: FIQ ASM at 0x805edcb4 length 36
[Sat Oct 31 14:50:17 2026] WARN::hcd_init_fiq:486: MPHI regs_base at 0xf0006000
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: DWC OTG Controller
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[Sat Oct 31 14:50:17 2026] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
[Sat Oct 31 14:50:17 2026] Init: Port Power? op_state=1
[Sat Oct 31 14:50:17 2026] Init: Power Port (0)
[Sat Oct 31 14:50:17 2026] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[Sat Oct 31 14:50:17 2026] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[Sat Oct 31 14:50:17 2026] usb usb1: Product: DWC OTG Controller
[Sat Oct 31 14:50:17 2026] usb usb1: Manufacturer: Linux 4.14.98-v7+ dwc_otg_hcd
[Sat Oct 31 14:50:17 2026] usb usb1: SerialNumber: 3f980000.usb
[Sat Oct 31 14:50:17 2026] hub 1-0:1.0: USB hub found
[Sat Oct 31 14:50:17 2026] hub 1-0:1.0: 1 port detected
[Sat Oct 31 14:50:17 2026] dwc_otg: FIQ enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: NAK holdoff enabled
[Sat Oct 31 14:50:17 2026] dwc_otg: FIQ split-transaction FSM enabled
[Sat Oct 31 14:50:17 2026] Module dwc_common_port init
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usb-storage
[Sat Oct 31 14:50:17 2026] mousedev: PS/2 mouse device common for all mice
[Sat Oct 31 14:50:17 2026] IR NEC protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR RC5(x/sz) protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR RC6 protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR JVC protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR Sony protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR SANYO protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR Sharp protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR MCE Keyboard/mouse protocol handler initialized
[Sat Oct 31 14:50:17 2026] IR XMP protocol handler initialized
[Sat Oct 31 14:50:17 2026] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[Sat Oct 31 14:50:17 2026] bcm2835-cpufreq: min=600000 max=1200000
[Sat Oct 31 14:50:17 2026] sdhci: Secure Digital Host Controller Interface driver
[Sat Oct 31 14:50:17 2026] sdhci: Copyright(c) Pierre Ossman
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: could not get clk, deferring probe
[Sat Oct 31 14:50:17 2026] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe
[Sat Oct 31 14:50:17 2026] sdhci-pltfm: SDHCI platform and OF driver helper
[Sat Oct 31 14:50:17 2026] ledtrig-cpu: registered to indicate activity on CPUs
[Sat Oct 31 14:50:17 2026] hidraw: raw HID events driver (C) Jiri Kosina
[Sat Oct 31 14:50:17 2026] usbcore: registered new interface driver usbhid
[Sat Oct 31 14:50:17 2026] usbhid: USB HID core driver
[Sat Oct 31 14:50:17 2026] vchiq: vchiq_init_state: slot_zero = b7980000, is_master = 0
[Sat Oct 31 14:50:17 2026] [vc_sm_connected_init]: start
[Sat Oct 31 14:50:17 2026] [vc_sm_connected_init]: end - returning 0
[Sat Oct 31 14:50:17 2026] Initializing XFRM netlink socket
[Sat Oct 31 14:50:17 2026] NET: Registered protocol family 17
[Sat Oct 31 14:50:17 2026] Key type dns_resolver registered
[Sat Oct 31 14:50:17 2026] Registering SWP/SWPB emulation handler
[Sat Oct 31 14:50:17 2026] registered taskstats version 1
[Sat Oct 31 14:50:17 2026] uart-pl011 3f201000.serial: cts_event_workaround enabled
[Sat Oct 31 14:50:17 2026] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[Sat Oct 31 14:50:17 2026] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[Sat Oct 31 14:50:17 2026] sdhost: log_buf @ b7907000 (f7907000)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[Sat Oct 31 14:50:17 2026] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[Sat Oct 31 14:50:17 2026] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[Sat Oct 31 14:50:17 2026] of_cfs_init
[Sat Oct 31 14:50:17 2026] of_cfs_init: OK
[Sat Oct 31 14:50:17 2026] Waiting for root device /dev/mmcblk0p2...
[Sat Oct 31 14:50:17 2026] random: fast init done
[Sat Oct 31 14:50:17 2026] Indeed it is in host mode hprt0 = 00021501
[Sat Oct 31 14:50:17 2026] mmc1: new high speed SDIO card at address 0001
[Sat Oct 31 14:50:17 2026] mmc0: host does not support reading read-only switch, assuming write-enable
[Sat Oct 31 14:50:17 2026] mmc0: new high speed SDHC card at address aaaa
[Sat Oct 31 14:50:17 2026] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
[Sat Oct 31 14:50:17 2026]  mmcblk0: p1 p2 p3 p4 < p5 p6 p7 >
[Sat Oct 31 14:50:17 2026] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[Sat Oct 31 14:50:17 2026] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[Sat Oct 31 14:50:18 2026] usb 1-1: new high-speed USB device number 2 using dwc_otg
[Sat Oct 31 14:50:18 2026] Indeed it is in host mode hprt0 = 00001101
[Sat Oct 31 14:50:18 2026] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[Sat Oct 31 14:50:18 2026] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sat Oct 31 14:50:18 2026] hub 1-1:1.0: USB hub found
[Sat Oct 31 14:50:18 2026] hub 1-1:1.0: 5 ports detected
[Sat Oct 31 14:50:18 2026] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[Sat Oct 31 14:50:18 2026] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[Sat Oct 31 14:50:18 2026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[Sat Oct 31 14:50:18 2026] smsc95xx v1.0.6
[Sat Oct 31 14:50:18 2026] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:5b:57:a2
[Sat Oct 31 14:50:18 2026] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): 13 orphan inodes deleted
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): recovery complete
[Sat Oct 31 14:50:19 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Sat Oct 31 14:50:19 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Sat Oct 31 14:50:19 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Sat Oct 31 14:50:19 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Sat Oct 31 14:50:19 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Sat Oct 31 14:50:19 2026] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:19 2026] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sat Oct 31 14:50:19 2026] devtmpfs: mounted
[Sat Oct 31 14:50:19 2026] Freeing unused kernel memory: 1024K
[Sat Oct 31 14:50:19 2026] systemd[1]: System time before build time, advancing clock.
[Sat Oct 31 14:50:19 2026] NET: Registered protocol family 10
[Sat Oct 31 14:50:19 2026] Segment Routing with IPv6
[Sat Oct 31 14:50:19 2026] ip_tables: (C) 2000-2006 Netfilter Core Team
[Sat Oct 31 14:50:19 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:19 2026] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[Sat Oct 31 14:50:19 2026] systemd[1]: Detected architecture arm.
[Sat Oct 31 14:50:19 2026] systemd[1]: Set hostname to <TM06202302>.
[Sat Oct 31 14:50:19 2026] random: systemd: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:19 2026] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
[Sat Oct 31 14:50:20 2026] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Journal Socket (/dev/log).
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on udev Kernel Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on udev Control Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on fsck to fsckd communication Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Journal Socket.
[Sat Oct 31 14:50:20 2026] systemd[1]: Listening on Syslog Socket.
[Sat Oct 31 14:50:20 2026] i2c /dev entries driver
[Sat Oct 31 14:50:21 2026] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Sat Oct 31 14:50:21 2026] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[Sat Oct 31 14:50:21 2026] bcm2835_alsa bcm2835_alsa: card created with 8 channels
[Sat Oct 31 14:50:22 2026] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver brcmfmac
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver usbserial
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver usbserial_generic
[Sat Oct 31 14:50:22 2026] usbserial: USB Serial support registered for generic
[Sat Oct 31 14:50:22 2026] usbcore: registered new interface driver cp210x
[Sat Oct 31 14:50:22 2026] usbserial: USB Serial support registered for cp210x
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Sat Oct 31 14:50:22 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Sat Oct 31 14:50:22 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Sat Oct 31 14:50:22 2026] Adding 1999020k swap on /dev/mmcblk0p3.  Priority:-2 extents:1 across:1999020k SSFS
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[Sat Oct 31 14:50:22 2026] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[Sat Oct 31 14:50:22 2026] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:23 2026] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:23 2026] systemd-journald[92]: Received request to flush runtime journal from PID 1
[Sat Oct 31 14:50:23 2026] random: crng init done
[Sat Oct 31 14:50:23 2026] random: 7 urandom warning(s) missed due to ratelimiting
[Sat Oct 31 14:50:24 2026] uart-pl011 3f201000.serial: no DMA platform data
[Sat Oct 31 14:50:25 2026] brcmfmac: power management disabled
[Sat Oct 31 14:50:25 2026] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[Sat Oct 31 14:50:26 2026] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[Sat Oct 31 14:50:26 2026] Adding 102396k swap on /var/swap.  Priority:-3 extents:1 across:102396k SSFS
[Sat Oct 31 14:50:27 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:50:30 2026] NET: Registered protocol family 38
[Sat Oct 31 14:50:30 2026] Bluetooth: Core ver 2.22
[Sat Oct 31 14:50:30 2026] NET: Registered protocol family 31
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI device and connection manager initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: L2CAP socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: SCO socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART driver ver 2.3
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol H4 registered
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol Three-wire (H5) registered
[Sat Oct 31 14:50:30 2026] Bluetooth: HCI UART protocol Broadcom registered
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP filters: protocol multicast
[Sat Oct 31 14:50:30 2026] Bluetooth: BNEP socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM TTY layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM socket layer initialized
[Sat Oct 31 14:50:30 2026] Bluetooth: RFCOMM ver 1.11
[Sat Oct 31 14:50:31 2026] EXT4-fs (dm-0): recovery complete
[Sat Oct 31 14:50:31 2026] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[Sat Oct 31 14:50:32 2026] fuse init (API version 7.26)
[Sat Oct 31 14:50:35 2026] usb 1-1.2: USB disconnect, device number 4
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.0: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB1: cp210x converter now disconnected from ttyUSB1
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.1: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB2: cp210x converter now disconnected from ttyUSB2
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.2: device disconnected
[Sat Oct 31 14:50:35 2026] cp210x ttyUSB3: cp210x converter now disconnected from ttyUSB3
[Sat Oct 31 14:50:35 2026] cp210x 1-1.2:1.3: device disconnected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: new full-speed USB device number 5 using dwc_otg
[Sat Oct 31 14:50:37 2026] usb 1-1.2: New USB device found, idVendor=10c4, idProduct=ea71
[Sat Oct 31 14:50:37 2026] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[Sat Oct 31 14:50:37 2026] usb 1-1.2: Product: CP2108 Quad USB to UART Bridge Controller
[Sat Oct 31 14:50:37 2026] usb 1-1.2: Manufacturer: Silicon Labs
[Sat Oct 31 14:50:37 2026] usb 1-1.2: SerialNumber: 75829DA72B37C9B711E8CB952297F2C
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.0: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB0
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.1: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB1
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.2: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB2
[Sat Oct 31 14:50:37 2026] cp210x 1-1.2:1.3: cp210x converter detected
[Sat Oct 31 14:50:37 2026] usb 1-1.2: cp210x converter now attached to ttyUSB3
[Sat Oct 31 14:54:22 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:54:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:55:51 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:55:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:58:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 14:58:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:58:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 14:59:57 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 14:59:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:05:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:05:13 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 15:05:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:05:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:05:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:06:11 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:06:13 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:10:17 2026] rpi_firmware_get_throttled: 4 callbacks suppressed
[Sat Oct 31 15:10:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:10:19 2026] rpi_firmware_get_throttled: 4 callbacks suppressed
[Sat Oct 31 15:10:19 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:11:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:11:59 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:12:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:12:44 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:17:48 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 15:17:48 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:17:52 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 15:17:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:19:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:19:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:24:38 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:24:40 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:25:13 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:25:15 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:26:28 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:26:32 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:30:40 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:30:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:30:42 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:30:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:30:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:31:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:31:23 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:31:25 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:39:43 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:39:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:39:45 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:39:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:40:14 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:40:16 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:40:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:41:02 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:48:18 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:48:18 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:48:21 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 15:48:21 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:50:13 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:50:15 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:50:52 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:50:54 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:54:31 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 15:54:31 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:54:33 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 15:54:33 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:54:54 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:55:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:55:19 2026] Voltage normalised (0x00000000)
[Sat Oct 31 15:55:25 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 15:59:59 2026] rpi_firmware_get_throttled: 7 callbacks suppressed
[Sat Oct 31 15:59:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:00:01 2026] rpi_firmware_get_throttled: 7 callbacks suppressed
[Sat Oct 31 16:00:01 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:01:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:01:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:02:23 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 16:06:28 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:06:30 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:06:39 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:06:43 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:08:31 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:08:33 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:13:14 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 16:13:14 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:13:20 2026] rpi_firmware_get_throttled: 3 callbacks suppressed
[Sat Oct 31 16:13:20 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:13:39 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:13:41 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:13:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:14:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:16:15 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 16:19:39 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:19:41 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:20:58 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:21:00 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:21:08 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:21:10 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:25:12 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 16:25:12 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:25:14 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 16:25:14 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:25:53 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:25:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:26:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:26:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:34:00 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 16:34:00 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:34:02 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 16:34:02 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:34:08 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:34:10 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:39:12 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:39:16 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:39:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:39:58 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:40:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:40:27 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:45:12 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:45:18 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:49:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:49:52 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:54:37 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:54:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:56:24 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:56:28 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 16:59:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 16:59:24 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:00:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:00:31 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:03:42 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:03:47 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:06:20 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:06:23 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:09:38 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:09:40 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:11:26 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:11:30 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:12:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:12:14 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:12:56 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:13:02 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:19:43 2026] rpi_firmware_get_throttled: 4 callbacks suppressed
[Sat Oct 31 17:19:43 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:19:45 2026] rpi_firmware_get_throttled: 4 callbacks suppressed
[Sat Oct 31 17:19:45 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:27:19 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:27:21 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:27:44 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:27:46 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:27:52 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:27:56 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:33:17 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 17:33:17 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:33:19 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 17:33:19 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:34:42 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:34:44 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:35:51 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:35:57 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:38:29 2026] rpi_firmware_get_throttled: 5 callbacks suppressed
[Sat Oct 31 17:38:29 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:38:33 2026] rpi_firmware_get_throttled: 5 callbacks suppressed
[Sat Oct 31 17:38:33 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:39:10 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:39:14 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:41:50 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:41:53 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:47:15 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:47:17 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:47:40 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:47:42 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:48:57 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:48:59 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:55:55 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 17:55:55 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:55:57 2026] rpi_firmware_get_throttled: 1 callbacks suppressed
[Sat Oct 31 17:55:57 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:57:49 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:57:51 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 17:58:37 2026] Voltage normalised (0x00000000)
[Sat Oct 31 17:58:39 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 18:09:10 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 18:19:08 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 18:29:51 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 18:29:51 2026] Voltage normalised (0x00000000)
[Sat Oct 31 18:29:55 2026] rpi_firmware_get_throttled: 2 callbacks suppressed
[Sat Oct 31 18:29:55 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 18:50:18 2026] Voltage normalised (0x00000000)
[Sat Oct 31 18:50:21 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 18:54:48 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 18:54:57 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 18:55:01 2026] cp210x ttyUSB0: failed to get comm status: -71
[Sat Oct 31 19:27:16 2026] Voltage normalised (0x00000000)
[Sat Oct 31 19:27:18 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 19:33:55 2026] Voltage normalised (0x00000000)
[Sat Oct 31 19:33:57 2026] Under-voltage detected! (0x00050005)
[Sat Oct 31 19:58:59 2026] Voltage normalised (0x00000000)
[Sat Oct 31 19:59:01 2026] Under-voltage detected! (0x00050005)

=================================================
